Skip to main content

APD12N0.2-0.1-C2.5 (former APD12N201501) High Voltage DC/DC Converter

Product information "APD12N0.2-0.1-C2.5 (former APD12N201501) High Voltage DC/DC Converter"

Input Voltage 12-15 VDC; Output Voltage 200 VDC; Output Power 0.1 W; PCB flat Mounting; Negative Output Voltage

This item is compatible with Advanced Energy item number 0.2US12-N0.1

Further variants of this series with various inputs, outputs voltages and powers are available. For more information or to place an order please look into the datasheet or contact us.

Manufacturer "SDS High Voltage"
Related links of the manufacturer

Similar products

APD HV4479 High-Voltage DC/DC Converters
Ultra-compact, Adjustable Output; Input Voltage 11.5 – 13.5 VDC, 22.5 – 26.5 VDC; Output Voltage 300 V, 600 V, 1 kV, 2 kV The HV4479 series is a direct replacement and pin-to-pin compatible to the standard 4479 converters. The micro-size and lightweight converters feature very low noise and low drift and are available as 12V and 24V models. The HV4479 has voltage and current monitors, a low temperature coefficient and is protected against arc and short-circuit. It is available with output voltages of 300 V, 600V, 1kV and 2kV. Key features: Very low noise – very low drift Vout: 300V, 600V, 1kV or 2kV models Vin: 12 or 24V options Polarity: fixed, negative or positive options Remote voltage programming or embedded potentiometer Voltage & current monitors Output overshoot free, limited slew rate Applications: Photomultiplier tubes and avalanche photo diodes
Product number: SW11992
Manufacturer:
APD Series High Voltage DC/DC Converters
Compact Size; Input Voltage 4.5 to 15.5 VDC; Output Voltage 200 to 500 VDC, programmable from 0 to 100%; Output Power 100 mW The highly compact SDS's APD series is specially designed to meet the high voltage power requirements of scientific instrumentation used in the industrial, medical and military sectors. These modules provide access to voltages of up to 500 VDC in instruments where space is an important factor in order to achieve greater quantum efficiency and reduced total leakage current. With its ultra-miniaturized (5.75 cm³) metal case, the APD HV DC/DC converter series features low radiation noise. The devices are also lightweight (13 g) and allow for flat mounting on printed circuit boards with a height of only 11 mm. 64 models provide voltages from 200 VDC to 500 VDC at a power level of 0.1 W.Tight line and load regulation of <±0.01%, a low temperature coefficient of 50 ppm/°C and a low ripple of 7mVp-p all contribute to the APD series’ very high output stability. Key Features: Micro size and lightweight PCB flat mounting Voltage monitor Tight line & load regulation Arc and short circuit protected Inhibition mode Low ripple Low temperature coefficient Optional flying lead for HV output Applications: Small, Lightweight, Portable Devices; Fiber-optic Telecom Detectors; Particle Physics Detectors; Laser Range Finder Detectors; Thin-film Bias; Avalanche Photo Diodes (APD); Silicon Photomultipliers (SiPM); Multi-pixel Photon Counter (MPPC); Ionization Detectors; Ultrasonic Transducers; Small PZT Drivers; ATE Leakage Testing; Bias Supplies
Product number: SW10332
Manufacturer:
APD12N0.3-0.1-C2.5 (former APD12N301331) High Voltage DC/DC Converter
Input Voltage 12-15 VDC; Output Voltage 300 VDC; Output Power 0.1 W; PCB flat Mounting; Negative Output Voltage This item is compatible with Advanced Energy item number 0.3US12-N0.1 Further variants of this series with various inputs, outputs voltages and powers are available. For more information or to place an order please look into the datasheet or contact us.
Product number: C014065-6
Manufacturer:

€112.12*
APD12N0.5-0.1-C2.5 (former APD12N501201) High Voltage DC/DC Converter
Input Voltage 12-15 VDC; Output Voltage 500 VDC; Output Power 0.1 W; PCB flat Mounting; Negative Output Voltage This item is compatible with Advanced Energy item number 0.5US12-N0.1 Further variants of this series with various inputs, outputs voltages and powers are available. For more information or to place an order please look into the datasheet or contact us.  
Product number: C014068-6
Manufacturer:

€112.11*
APD5N0.2-0.1-C2.5 (former APD5N201501) High Voltage DC/DC Converter
Input Voltage 5 VDC; Output Voltage 200 VDC; Output Power 0.1 W; PCB flat Mounting; Negative Output Voltage This item is compatible with Advanced Energy item number 0.2US5-N0.1 Further variants of this series with various inputs, outputs voltages and powers are available. For more information or to place an order please look into the datasheet or contact us.
Product number: C014061-6
Manufacturer:

€112.11*
APD5P0.2-0.1-C.2.5 (former APD5P201501) High Voltage DC/DC Converter
Input Voltage 5 VDC; Output Voltage 200 VDC; Output Power 0.1 W; PCB flat Mounting; Positive Output Voltage This item is compatible with Advanced Energy item number 0.2US5-P0.1 Further variants of this series with various inputs, outputs voltages and powers are available. For more information or to place an order please look into the datasheet or contact us.
Product number: C014062-6
Manufacturer:

€113.46*
APD5P0.2-0.1-C2.5-L (former APD5P201501L) High Voltage DC/DC Converter
Input Voltage 5 VDC; Output Voltage 200 VDC; Output Power 0.1 W; PCB flat Mounting; Positive Output Voltage This item is compatible with Advanced Energy item number 0.2US5-P0.1-WS Further variants of this series with various inputs, outputs voltages and powers are available. For more information or to place an order please look into the datasheet or contact us.
Product number: C014063-6
Manufacturer:

€134.52*

Customers also viewed

KT Series High Voltage AC/DC Power Supplies
Input Voltage 198-264 VAC; Max. Output Voltage 70-150 kVDC; Max. Power 2,000 W; Efficiency >85%; Voltage Regulation <0.005%; Current Regulation <0.1% XP Glassman’s KT Series of 2000 W high voltage AC/DC power supplies feature flexible embedded controls with low ripple and noise. They are air insulated, fast response, 4U rack-mount units with tight regulation and low arc discharge currents. A range of models is available with output voltage ranges from 0 to 70 kVDC through 0 to 150 kVDC. The KT series features “air” as the primary dielectric medium. No oil or encapsulation is used which would impede serviceability or increase weight. Internal circuitry constantly senses and integrates arcs that occur over a given time. In the event a system or load arcing problem develops and exceeds factory-set parameters, the power supply will cycle off in an attempt to clear the fault and then automatically restart after a preset “off dwell time”. The KT Series’ high voltage output is inhibited for a short period after each load arc to help extinguish the arc. Typically, ripple is less than 0.025% RMS of rated voltage at full load. Off-the-line pulse-width modulation (PWM) provides high efficiency and a reduced parts count for improved reliability. Front-panel digital encoders provide high-resolution local adjustment of voltage and current program. Integral RS-232, USB and optional Ethernet communications provide remote control program and monitor. The KT Series’ standard operation mode is constant voltage/current. Automatic crossover from constant-voltage to constant-current regulation provides protection against overloads, arcs and short circuits. A rear panel switch allows selection of either constant-current or current-trip operation. Thermostats and fan RPM sensing shut down the power supply due to over-temperature or reduced fan speeds. Standard accessories for the KT Series include a detachable 2,4 m shielded high voltage coaxial output cable, line cord, null modem cable and USB cable. The KT Series supplies are fully compliant with the following European directives: EN61000-3-2, Line Harmonics EN61010/ IEC61010, Safety EN61000-6-4, Conducted and Radiated Emissions EN61000-6-2:2005, Conducted and Radiated Immunity 2011/65/EU, Restriction of the Use of Hazardous Substances (RoHS) Key Features: 4U Rack Mount Air Insulated Maximum Output Power: 2000 W Maximum Output Voltage: 70 to 150 kVDC Maximum Output Current: 10 to 29 mA Low Ripple: <0.025% of Rated Voltage at Full Load Tight Regulation Static Voltage Regulation: <0.005% for Specified Line and 0.01% for Specified Load Variations Current Regulation: <0.1% From Short Circuit to Rated Voltage at Any Load Condition Constant Voltage/Constant Current Operation Arc Quench & Arc Count Front Panel, Remote, RS232, USB & Optional Ethernet Control Input Voltage: 198 to 264 VAC RMS, 48 to 63 Hz, Single Phase Efficiency: >85% Typical at Full Load Output Voltage Accuracy: 0.5% of Setting + 0.2% of Rated Output Voltage Repeatability: <0.1% of Rated Voltage Maximum Stored Energy: 11 to 20 J Voltage Monitor: 0 to +10 VDC Signal for 0 to Rated Voltage Current Monitor: 0 to +10 VDC Signal for 0 to Rated Current Stability: 0.01%/h After 0.5 h Warm-up, 0.05% per 8 h Polarity: Positive or Negative Polarity With Respect to Chassis Ground Protection: Against All Overload Conditions, Including Arcs and Short Circuits Signals Provided on the Remote Interface Connector: Safety Interlock, Voltage & Current Program/Monitor, HV Enable, HV Status, Fault Status, +10 V Reference, I/V Mode Status Options: Blank Front Panel, Zero Start Interlock, 0 to 5 V Voltage & Current Program/Monitor, Virtual RS-232 COM Port Over Ethernet Network 3 Year Warranty Approvals: IEC61010-1:2010; EN61000-6-4:2007, Class A EN61000-6-2:2005 Operating Temperature: -20 to +40 °C Dimensions: 177.0 x 482.6 x 609.6 mm Applications: High Voltage, High Power Applications; Photonics; Healthcare (Analytical, Diagnostics, Detectors); Industrial; Semiconductor Manufacturing; Research; Other
Product number: SW11414
Manufacturer: