Wavelength Range 1.0-5.0 µm MWIR; Detector Size 1x1, 2x2 mm; Time Constant <2 µs; Responsivity 9x103, 4.5x103 V/W; Element Resistance 0.1-2.0 MΩ New Infrared Technologies’ (NIT) LEPTON Series of single-pixel VPD PbSe MWIR detectors are available uncooled as well as with integrated TECs (thermoelectric cooling elements), with different geometries, packaging solutions and preamplifier boards. LEPTON Series single-pixel detectors come in two standard sizes: 1 mm × 1 mm or 2 mm × 2 mm. LEPTON Series uncooled single-pixel PbSe MWIR detectors can be ordered packaged in SMD or TO-5 housings (with cap, hermetic) with sapphire window. These detectors are operational at room temperature and don’t require any cooling devices. LEPTON Series cooled single-pixel PbSe MWIR detectors are hermetically packaged in a TO-8 can housing with cap and sapphire window and include one or two thermoelectric cooler (TEC) stages for higher sensitivity as well as a thermistor. A calibration curve for the thermistor is available. NIT’s LEPTON Series also includes two low-noise preamplifier boards that are 5-V-powered via mini-USB connector: The LEPTON ANALOG PREAMP provides rotary switches to manually select the detector biasing voltage (4 steps from 1.25 V to 10 V) as well as the transimpedance gain (4 steps from 104 to 107 V/A). This preamp outputs a ±10 V analog voltage on a BNC connector. The LEPTON PREAMP WITH USB OUTPUT allows to digitally select the values for detector biasing voltage and transimpedance gain via software. Here, the output is a digital 14 Bit signal with a maximum sampling rate of 20 ksps. This preamp also features an analog output for the preamplifier stage on SMB or BNC connector. For more pixels, linear and two-dimensional array MWIR cameras are available from New Infrared Technologies – please refer to the LUXELL series of linear array MWIR cameras and TACHYON series of high-speed imaging MWIR cameras respectively. Key Features: Detector Sensing Material: VPD Polycrystalline PbSe Uncooled and TEC-cooled (1-stage, 2-stages) Versions Available Square Pixels, Available Pixel Geometries: 1 x 1 mm, 2 x 2 mm Packaging: SMD (10x10 mm) Non-hermetic, TO-5 (9.14 mm Dia.) Hermetic With Cap, TO-8 (15.24 mm Dia.) Hermetic With Cap Sapphire Window IR Detection Band: MWIR, 1.0 µm to 5.0 µm Peak Wavelength of Detection: 3.7 µm D* (λpeak) Uncooled: 2x109 Jones Typical D* (λpeak, 1,000 Hz, 1.2 Hz) Cooled: 1x1010 Jones Time Constant: <2 µs Biasing Voltage: 5 V, 10 V Typical Element Resistance: 0.1 to 2.0 MΩ Responsivity (@Vb = 10 V): 9x103 V/W (1x1 mm), 4.5x103 V/W (2x2 mm) Power: 1 mW Read-out Electronics External (Not Included) Customizable Operating Temperature: +5 °C to +70 °C (SMD), -40 °C to +85 °C (TO-5, TO8) Amplifier Board Transimpedance Gain: 104 to 107 V/A, Adjustable Manually or per Software Amplifier Board Dark Current Cancellation: 1.24 µA to 1 mA, Adjustable Manually or per Software Amplifier Board Power Supply: 5 VDC, 60 mA (mini-USB Connector) Amplifier Board Output: Analog (±10 V), Digital (14 Bit) Amplifier Board Noise: 5 pA @1 kHz, 107 V/A Amplifier Board Dimensions: 75.90 x 35.10 x 28.70 mm (Analog), 89.30 x 35.10 x 26.30 mm (USB Output) Applications: Gas & Flame Detection; Laser Detection

Detector Type Linear Array PbSe FPA; Spectral Range 1.0-5.0 µm; Pixel Size 600x60 µm; 256 Pixels; Resolution 1x256; Max. Line Rate 500 lps; Interface USB 2.0 New Infrared Technologies’ (NIT) LUXELL Series of line array MWIR (midwave infrared) cameras provide line rates of up to 300 lps (lines per second) at 1×256 pixels resolution – in uncooled operation. The LUXELL CAMERA-S with IP67-rated housing is the plug-and-play industrial version featuring a USB 2.0 interface and industrial connector. The lens, with f/35 mm and CS-mount optical interface, is IP67-rated as well. The camera includes the LUXELL software suite and a development kit for LabVIEW. This ready-to-use system is well suited for the development of affordable solutions and integration in the customer’s production line. The LUXELL CAMERA-S is based on the linear scanning array LUXELL CORE-S, an electronic module based on a microcontroller architecture, which includes the linear, 1x256 pixels LUXELL FPA (Focal Plane Array), 2-channel readout electronics (300 lines per second max), USB 2.0 output, and a powerful software suite and SDK for LabVIEW. Though not housed in an industrial case, the LUXELL CORE-S module also is functionally plug and play, ready to read the FPA signal and ideal for the development of very cost-effective solutions based on the LUXELL FPA. With dimensions of 56 mm x 40 mm x 29.5 mm (without connector), the compact-size LUXELL CORE-S module enables full integration in Industry 4.0 applications and factories of future production lines. For larger and two-dimensional array cameras from New Infrared Technologies, please refer to the TACHYON series of high-speed imaging MWIR cameras. And for applications requiring single-pixel MWIR detection, have a look at NIT’s LEPTON series of single-pixel VPD PbS MWIR detectors. Key Features: Detector Type: Linear Array PbSe FPA Uncooled Operation Array Format: 1x256 (256 Pixels) Aspect Ratio: 1:10 Pixel Size: 600 µm x 60 µm Readout Method: x-y Addressed (Rolling Shutter) Number of ADC Readout Channels: 2 Maximum Line Rate: 500 lps (Lines per Second) Spectral Range: MWIR, 1.0 µm to 5.0 µm Peak Wavelength of Detection: 3.7 µm Integration Time: >4.10 µs to 20 µs, Selectable Data Format: Raw Data 14 Bit Optimum Temperature Detection Range: >+100 °C Interface: USB 2.0 High-speed ((480 Mbps )With Industrial Connector (LUXELL CAMERA S) Includes Shutter for 1-pt Offset Correction Software Included: NIT Software Suite (Acquisition & Visualization), LabVIEW SDK Start-up Time: <10 s (LUXELL CAMERA S) Power Supply: 5 VDC, 0.2 A Through USB Connection IP67-rated Metal Housing With CS-mount Optics Interface, M12x1 Industrial USB Connector, Tripod Screw Holes and Water Block for Thermal Stabilization of FPA With Water or Air (LUXELL CAMERA S) Dimensions LUXELL CAMERA S: 70 x 131.5 x 17 mm (With Housing, Water Block and Lens) Weight LUXELL CAMERA S: 400 g Optics LUXELL CAMERA S: Silicon Lens f = 35 mm, F# 1.1, FoV 25° x 1°, AR Coating, Manual Focus, CS-mount, IP67 Dimensions LUXELL CORE-S Module: 56 x 44.5 x 41.5 mm Weight LUXELL CORE-S Module: 60 g Dimensions 1x257 Pixels LUXELL FPA; 24 x 24 x 2.2 mm Applications: Industrial Process Control (Scanning); Glass Manufacturing Industry; Gas and Flame Detection; Industrial Welding Process Monitoring; Laser Manufacturing Process Monitoring; Machine Vision, Spectroscopy; OEM Integration

Detector Type VPD PbSe FPA; Spectral Range 1.0-5.0 µm; Pixel Size 50x50, 130x130 µm; 1,024, 16,384 Pixels; Resolution 32x32, 128x128; Max. Frame Rate 1,00-10,000 fps; Interface USB 2.0, GigE VISION 2.0 New Infrared Technologies’ (NIT) TACHYON Series of high-speed imaging MWIR (midwave infrared) cameras provide frame rates of up to 10,000 fps (frames per second) at the full resolution of up to 128×128 pixels – in uncooled operation. While the TACHYON 16k CAMERA features 2,000 fps at full resolution, the TACHYON 16K CAMERA PLUS model allows up to 4,000 fps at full resolution as well as software-configurable ROI windowing modes, hardware NUC correction and selectable data transmission modes. Uncooled and affordable, fast and robust, the compact size TACHYON 16K CAMERA models are optimal for volume requirements and targeted for full integration in Industry 4.0 applications. Both TACHYON 16K CAMERA and CAMERA PLUS models are based on NIT’s TACHYON 16K FPA (Focal Plane Array), sensitive in the 1 µm to 5 µm spectral range. This FPA utilizes VPD PbSe, entirely developed and manufactured by NIT, providing the first quantum infrared technology monolithically compatible with Si-CMOS circuitry. With on-chip A/D readout electronics as well as on-chip dark current cancellation circuit and a digital interface for control and data, the TACHYON 16K FPA features global shutter snapshot readout of 14 Bit raw data and a programmable integration time between 20 µs and 1,000 µs. NIT’s TACHYON 1024 microCAMERA  is an uncooled MWIR camera with an IP67-rated enclosure for industrial environments. The camera is powered through a USB 2.0 (high speed) interface with industrial M12 USB connector and capable to reach a frame rate of 1,000 fps. Its miniaturized size, based in a SWaP-C concept, ensures perfect integration into the production process. The TACHYON 1024 microCAMERA is based on NIT’s TACHYON 1024 FPA, an uncooled 32x32 VPD PbSe focal plane array with digital interface and high-speed capabilities up to 10,000 images per second, sensitive in the 1 µm to 5 µm spectral range. With on-chip A/D readout electronics as well as on-chip dark current cancellation circuit and a digital interface for control and data, the TACHYON 1024 FPA features snapshot readout of 10 Bit raw data and a programmable integration time between 100 µs and 1,000 µs. Based on the TYCHYON 1024 FPA, NIT also provides the TACHYON 1024 microCORE  uncooled MWIR module with USB connection. The module is USB-powered and capable to reach an acquisition frame rate of 1,000 fps. Optimized size and affordable cost ensure perfect integration in the production process, also in cost-sensitive machine vision applications. For linear array cameras from New Infrared Technologies, please refer to the LUXELL series of linear array MWIR cameras. And for applications requiring single-pixel MWIR detection, have a look at NIT’s LEPTON series of single-pixel VPD PbS MWIR detectors. Key Features: Detector Type: VPD PbSe FPA With Digital Interface Uncooled Operation Array Format: 128x128 (16,384 Pixels), 32x32 (1,024 Pixels) Pixel Size: 50 µm x 50 µm, 130 µm x 130 µm ROI Windowing Function (64x64, 32x32, 1x128) for TACHYON 16K CAMERA Models; Window Position & Dimensions SW-configurable (PLUS Model) Maximum Frame Rate: 1,000 fps to 10,000 fps Spectral Range: MWIR, 1.0 µm to 5.0 µm Peak Wavelength of Detection: 3.7 µm Integration Time: 10 µs to 1,000 µs, Selectable Data Transmission Modes: Raw Data 10 Bit, 14 Bit; NUC Corrected 16 Bit and High-speed RAW/NUC 12 Bit (TACHYON 16K CAMERA PLUS) Minimum Temperature of Detection: +100 °C Interfaces: USB 2.0 High-speed (480 Mbps); GigE VISION 2.0 With PoE, Multi-purpose DI/DO Connector (Trigger In/out) for TACHYON 16K CAMERA PLUS Mechanical Shutter for 1-pt Offset Correction Start-up Time: <10 s (TACHYON 16K CAMERA Models) Power Supply: PoE, 8 W (TACHYON 16K CAMERA Models), 5 VDC Through USB Connection Metal Housing With Rear Connectors and M3 & M4 Tripod Screw Holes (TACHYON 16K CAMERA Models) Dimensions TACHYON 16K CAMERA Models: 66 x 62 x 62 mm Weight TACHYON 16K CAMERA Models: 400 g Optics TACHYON 16K CAMERA Models (Standard Option): f = 35 mm, F# 1.1, FoV 10.5° x 10.5 °, AR Coating, Manual Focus, CS-Mount Dimensions TACHYON 1024 microCAMERA: 98.0 x 49.5 x 61.0 mm Weight TACHYON 1024 microCAMERA: 250 g Optics TACHYON 1024 microCAMERA: f = 24 mm, F#1.2, FoV 10.25° x 10.25° (Standard), f = 48 mm, F#1.6, FoV 5.1° x 5.1° (Additional Lens Option) Software Included: NIT Software Suite, SDK Available for Custom Software Programming Dimensions TACHYON 1024 microCORE Module: 43 x 36 x 17 mm Biasing Voltage TACHYON 1024 microCORE Module: 1.00 V to 2.00 V, Selectable Metal Housing (46.5 x 39.5 x 29.5 mm) With CS-mount Optics Interface Available for TACHYON 1024 microCORE Module Applications: Machine Vision; Additive Manufacturing Monitoring; Industrial Automation; Laser Process Monitoring; Industrial Process Monitoring & Control (welding, Cutting, etc.); Gas Detection; Spectroscopy; Fire Detection; Glass Manufacturing Quality Assurance; Research & Development; OEM Integration