Skip to main content

NOA 84 Optical Adhesive 1oz bottle

Product information "NOA 84 Optical Adhesive 1oz bottle"

Refractive Index 1.46; 40-75 cps Viscosity at 25°C

Norland Optical Adhesive NOA 84 is a clear, colorless, liquid photopolymer that will cure when exposed to ultraviolet light and or visible light (blue-violet). Since it is a one part system and 100% solids, it offers many advantages in bonding where the adhesive can be exposed to UV light. The use of NOA 84 eliminates premixing, drying or heat curing operations common to other adhesive systems. Curing time is remarkably fast, and is dependent upon the thickness applied and the amount of ultraviolet light energy available.

NOA 84 is designed to give the best possible optical bond when using plastic to plastic or plastic to glass substrates. NOA 84 has excellent adhesion to CR-39, polarized film, Delrin®, nylon, cellulose acetatebutyrate, polycarbonate, acrylics and glass.

Typical Properties of NOA 84

Solids 100%
Elongation at Failure 57%
Modulus of Elasticity (psi) 1140
Tensile Strength (psi) 649
Hardness - Shore D 55


Shelf life of the liquid is at least 4 months from the date of shipment if stored in a cool (5-22° C), dark place in the original container. If refrigerated, allow the adhesive to come to room temperature prior to use.

Manufacturer "Norland"
Norland Products, Inc. began in 1960 as a manufacturer of specialised gelatine used in the electronics industry. For the last 10 years Norland Products has been supplying interferometric test equipment to the fiberoptic industry, including interferometers for fiberoptic arrays, interferometers for fiberoptic connectors, multifiber systems, connectors tuners.
Related links of the manufacturer

Customers also viewed

NOA 86 Optical Adhesive 1oz bottle
Refractive Index 1.55; Viscosity at 25°C 200-300 cps Norland Optical Adhesive 86 is an adhesive that will cure optically clear when exposed to long wavelength ultraviolet or visible light (blue-violet). The adhesive has low viscosity and meets the Bellcore specifications of 85C/85RH for 2000 hours. NOA 86 is recommended for bonding glass or plastic. NOA 86 is cured by ultraviolet light between 315 to 400 nanometers and visible light between 400 to 420 nanometers. The peak absorption wavelengths are 325, 365 and 400 nanometers. Minor absorption wavelengths are 410 and 420 nm. Full cure requires 2.5 Joules/cm 2 . When fully cured, NOA 86 has very good adhesion and solvent resistance, but it has not reached its optimum adhesion to glass. This will come with aging over a period of about 1 week in which a chemical bond will form between the glass and adhesive. This optimum adhesion can also be obtained by aging at 50C for 12 hours.NOA 86 can withstand temperatures before aging from -15C to 90C when used for glass bonding. After aging, it will withstand temperatures from -125C to 125C.Typical Properties of NOA 86 Liquid Color Slight yellow tint that disappears upon curing Modulus (psi) 7,834 Tensile (psi) 360,400 Elongation at Failure 2.8% Hardness - Shore D 75 Keep NOA 86 in a cool (5-22 °C) dark place. If refrigerated, a low the adhesive to come to room temperature before using.
Product number: C007061-6
Manufacturer:

€59.20*
Only 1 available
PWRPAK-5V Switching Power Supply
Up to 8 A at 5 VDC. The PWRPAK-5V switching power supply can be used with following accessories for laser diode drivers and temperature controllers from Wavelength Electronics: HTC1500, HTC1500-62, HTC3000, HTC3000-62, HTC4000-62, LD2.5CHA laser diode drivers, LD5CHA laser diode drivers, PID1500, PLD200, PLD500, PLD1250, PLD5000, PLD6500, PTC5000, PTC10000. Key Features Low Profile High Power Density Short Circuit Protection 1% Noise and Ripple 100-240 VAC, 50-60 Hz Input Voltage
Product number: C006582-6
Manufacturer:

€257.41*