EYP-DFB-1064-00025-1500-BFY12-0002 Laser Diodes and Modules

EXALOS SLEDs at 750 nm are especially suited for optical coherence tomography (OCT) and biomedical applications thanks to their high output power and large bandwidth, and high suppression of second coherence peaks,

Output Current LD 0.25-7.5 A; Chassis Mount; Compatible with Type A, B & C Lasers  Wavelength Electronics‘ MPL series of module type very low noise laser diode drivers offers high performance while operating from a single +12 to +15 V DC supply. A single 15 pin D-sub connector is used for inputs and outputs, enhancing the reliability of the interface with your laser diode or TE module. The MPL series is very easy to set up for any laser diode / photodiode configuration and provides excellent stability during constant current, constant power, or modulated operation of your laser diode. Two photodiode ranges provide variable sensitivities for optimum operation. Users can maintain excellent stability when operating in both constant current and constant power mode. Front panel 12-turn setpoint and current limit trimpots are easily accessible and offer precision control. A slow start circuit, mechanical shorting relay and current limit offer maximum protection for your laser diode even when power is removed. The level of current set by the current limit is always drawn from the DC power supply. Free, effective and responsive technical support is available to simplify integration of Wavelength products into your OEM design. Standard product can be easily modified to meet your application requirements. Get in touch with the AMS Technologies laser diode driver experts to discuss your customized solution! Key Features: Module Type, Benchtop or Chassis Mounting Size: 90 x 89 x 25 mm (7,500 mA: 90 x 140 x 25 mm) Operates All LD / PD Pin Configurations RMS Noise and Ripple: <1 to <20 µA- Up to 7,500 mA LD Current +12 to +15 V Single Supply Operation: Maximum Power Dissipation: 4 to 90 W Onboard Setpoint and Limit Controls Bandwidth: up to 1.4 kHz (CC)- Slow Start & Current Limit Protection Mechanical Relay Protection- Constant Current or Constant Power Mode 24 h Current Stability at Ambient +25 °C: <75 ppm Current Ramp: 500 ms to Full Scale Rise / Fall Times: 250 μs (to Full Scale) / 300 μs Applications: Excellent for Electro-optical Equipment and More

Single Mode Patch Cables; 200-2000 nm; Fiber Type SM; Insertion Loss ≤0.2 dB; Connector Type FC/PC, SC, ST, LC, MU, E2000 For its SMJ series of single mode (SM) patch cables, OZ Optics produces high-quality fiber optics patchcords using a variety of commercially available connectors and fibers. These patchcords offer low insertion losses, and excellent repeatability. SMJ SM patch cables can be manufactured to any specified length. An array of cable materials is available, including unjacketed fiber, 0.9 mm outside diameter (O.D) loose tube buffer, 3 mm O.D Kevlar reinforced PVC jacketing, 3 mm armored cabling, and 5 mm heavy duty armored cabling as well as 3 mm or 5 mm stainless steel armored cablings. OZ Optics offers single mode (SM) fibers for a variety of wavelengths, ranging from 320 nm to 1550 nm, as well as 2000 nm fibers. They typically have a 99% numerical aperture (NA) of about 0.13. Higher NA single mode fibers are available for certain special applications. When ordering single mode fibers please specify what wavelength it will be used for. Single mode fiber designed for 1300 nm will not be single mode at 633 nm. Single mode fiber designed for 488 nm will work at 633 nm with only slightly higher losses, but at 700 nm the losses are too high. A large assortment of fiber types is available from stock. OZ Optics also offers custom cabling services for customer-provided fibers. Please contact AMS Technologies for available fiber types. SMJ SM patch cables can be terminated with NTT-FC, SC, AT&T-ST, LC, and SMA connectors, as well as other connector types. FC connectors are highly recommended for both single mode and multi mode use. They offer high precision and repeatability. SMA connectors are used mainly for very large core fibers and high-power applications. FC connectors with Super PC and angle polished (APC) end faces are available to minimize back reflection. Typical back reflection levels are 45 dB for Super PC connectors and 60 dB for APC connectors. FC connectors for SM fibers with ferrule hole sizes of 79 µm, 80 µm, and 83 µm are available to accommodate small cladding size fibers. For high-power single mode (SM) patch cables, please refer to OZ Optics’ QSMJ series. Key Features: Low Insertion Loss (IL): <0.2 dB Excellent Repeatability Connector Type: FC/PC, SC, ST, LC, MU, E2000 Custom Ferrule Termination Available Designed to Meet Telcordia Specification Large Selection of Cabling Operating Wavelengths: 200 nm to 2000 nm Core Size Diameters: 2 µm to 1500 µm (Multi Mode) Low- and High-Numerical-Aperture Fibers Dielectric Anti-Reflection (AR) Coatings Available Applications: High-speed (10, 40 GBit/s) Telecommunications; Interferometric Sensors; Integrated Optics; Fiber Amplifiers; Laser Detection and Display; Materials Processing

400-1700 nm; Power 1.5-30 mW; Bandwidth 3-160 nm; Current 60-600 mA; Beam Shape Gaussian, Flat Top; Package TO-9, TO-56, 5-BTF, 14-BTF, TOSA; Cooled or Uncooled; With or Without Monitor Photodiode With the EXS series, EXALOS offers a wide variety of standard superluminescent light emitting diode (SLED or SLD) modules covering near-infrared and RGB (red, green, blue) ranges. EXS series SLED modules are available at different wavelengths ranging from 400 to 1700 nm, with different output power and bandwidth values.EXALOS’ high-performance SLEDs come in various packages including cooled 14-pin dual-in-line (DIL) and butterfly package, cooled and uncooled 5-pin butterfly packages or low-cost uncooled TOSA and TO-56 packages.In addition to the standard product range, EXALOS can also offer SLED devices with custom optical performance and custom housing or fibers. Please contact the AMS Technologies SLED experts to discuss your custom SLED module solution tailored to your project’s requirements.Key Features: Wavelength Range: 400 to 1700 nm Power: 1.5 to 30 mW Bandwidth: 3 to 160 nm Current: 60 to 600 mA Beam Shape: Gaussian, Flat Top Package: TO-9, TO-56, 5-BTF, 14-BTF, TOSA Cooled or Uncooled Versions With or Without Monitor Photodiode Wavelength Power Bandwidth Current Spectral Shape Cooled Package Type MPD (y/n) Fiber Type Part Number 405 nm 10 mW 4 nm 110 mA Gaussian no TO-56 no none EXS210015-02 405 nm 2 mW 3 nm 100 mA Gaussian yes 14-BTF no SMF EXS210084-01 450 nm 10 mW 5 nm 180 mA Gaussian no TO-56 no none EXS210014-01 450 nm 5 mW 6 nm 160 mA Gaussian yes 14-BTF no SMF EXS210099-03 510 nm 6 mW 10 nm 600 mA Gaussian no TO-9 no none EXS210115-00 510 nm 1,5 mW 10 nm 500 mA Gaussian yes 14-BTF no SMF EXS210118-01 635 nm 10 mW 6 nm 60 mA Gaussian no TO-56 no none EXS210105-02 635 nm 10 mW 5 nm 60 mA Gaussian no TO-56 no none EXS210131-01 635 nm 3 mW 6 nm 60 mA Gaussian yes 14-BTF no SMF EXS210098-01 650 nm 4 mW 10 nm 100 mA Gaussian no TO-56 yes none EXS210035-02 650 nm 3 mW 6 nm 100 mA Gaussian yes 14-BTF yes SMF EXS210033-03 650 nm 10 mW 6 nm 60 mA Gaussian no TO-56 yes none EXS210030-03 650 nm 3 mW 6 nm 100 mA Gaussian yes 14-BTF yes PMF EXS210144-01 750 nm 5 mW 20 nm 150 mA Gaussian yes 14-BTF yes SMF EXS210025-01 750 nm 2 mW 20 nm 140 mA Gaussian no TOSA yes SMF EXS210065-01 750 nm 15 mW 20 nm 140 mA Gaussian no TO-56 yes none EXS210017-01 790 nm 5 mW 20 nm 120 mA Gaussian yes 14-BTF yes SMF EXS210060-01 790 nm 15 mW 20 nm 120 mA Gaussian no TO-56 yes none EXS210067-03 800 nm 10 mW 40 nm 160 mA Flat top yes 14-BTF yes SMF EXS210111-01 820 nm 2 mW 25 nm 120 mA Gaussian no TOSA yes SMF EXS210036-01 820 nm 3 mW 25 nm 120 mA Gaussian no 5-BTF no SMF EXS210119-01 820 nm 15 mW 25 nm 120 mA Gaussian no TO-56 yes none EXS210086-01 830 nm 12 mW 20 nm 200 mA Gaussian yes 14-BTF yes SMF EXS210005-02 840 nm 15 mW 48 nm 180 mA Flat top yes 14-BTF yes SMF EXS210090-01 840 nm 2 mW 50 nm 150 mA Flat top no TOSA yes SMF EXS210037-01 840 nm 10 mW 50 nm 150 mA Flat top no TO-56 yes none EXS210040-01 840 nm 10 mW 46 nm 160 mA Flat top yes 14-BTF yes SMF EXS210006-03 840 nm 6 mW 40 nm 120 mA Flat top yes 14-BTF yes SMF EXS210106-01 840 nm 6 mW 50 nm 120 mA Flat top yes 14-BTF yes SMF EXS210022-03 850 nm 5 mW 35 nm 250 mA Gaussian yes 14-BTF no SMF EXS210031-02 850 nm 5 mW 55 nm 150 mA Flat top yes 14-BTF yes SMF EXS210068-02 880 nm 5 mW 65 nm 200 mA Flat top yes 14-BTF yes SMF EXS210018-01 880 nm 12 mW 70 nm 200 mA Flat top yes 14-BTF yes SMF EXS210088-02 910 nm 15 mW 40 nm 200 mA Gaussian yes 14-BTF yes SMF EXS210120-01 1050 nm 10 mW 70 nm 200 mA Flat top yes 14-BTF yes SMF EXS210009-01 1050 nm 20 mW 60 nm 500 mA Gaussian yes 14-BTF yes SMF EXS210063-02 1060 nm 20 mW 70 nm 350 mA Flat top yes 14-BTF yes SMF EXS210010-01 1070 nm 10 mW 90 nm 300 mA Flat top yes 14-BTF yes SMF EXS210007-01 1230 nm 10 mW 45 nm 400 mA Gaussian yes 14-BTF yes SMF EXS210079-01 1270 nm 25 mW 30 nm 450 mA Gaussian yes 14-BTF yes SMF ESL2720-2113 1280 nm 8 mW 80 nm 500 mA Gaussian yes 14-BTF yes SMF EXS210049-02 1290 nm 2 mW 60 nm 200 mA Gaussian yes 14-BTF yes SMF EXS210034-02 1300 nm 6 mW 120 nm 450 mA Flat top yes 14-BTF yes SMF EXS210057-01 1300 nm 20 mW 50 nm 500 mA Gaussian yes 14-BTF yes SMF EXS210076-02 1300 nm 15 mW 70 nm 500 mA Gaussian yes 14-BTF yes SMF EXS210046-02 1300 nm 10 mW 110 nm 500 mA Flat top yes 14-BTF yes SMF EXS210045-02 1300 nm 10 mW 40 nm 250 mA Gaussian yes 14-BTF yes PMF EXS210072-01 1300 nm 10 mW 40 nm 250 mA Gaussian yes 14-BTF yes SMF EXS210032-02 1300 nm 12 mW 40 nm 200 mA Gaussian no TO-56 yes none EXS210041-02 1300 nm 3 mW 40 nm 200 mA Gaussian no TOSA no SMF EXS210028-02 1310 nm 30 mW 60 nm 600 mA Gaussian yes 14-BTF yes SMF EXS210047-02 1310 nm 30 mW 60 nm 600 mA Gaussian yes 14-BTF yes PMF EXS210087-01 1310 nm 20 mW 90 nm 600 mA Flat top yes 14-BTF yes SMF EXS210074-02 1350 nm 25 mW 50 nm 400 mA Gaussian yes 14-BTF yes SMF EXS210020-01 1380 nm 10 mW 40 nm 250 mA Gaussian yes 14-BTF yes SMF ESL1410-2113 1450 nm 5 mW 80 nm 500 mA Gaussian yes 14-BTF yes SMF EXS210103-01 1480 nm 15 mW 40 nm 450 mA Gaussian yes 14-BTF yes SMF ESL4820-2113 1520 nm 8 mW 60 nm 250 mA Gaussian yes 14-BTF yes SMF EXS210038-01 1520 nm 2 mW 60 nm 200 mA Gaussian no TOSA no SMF EXS210029-01 1520 nm 6 mW 60 nm 200 mA Gaussian no TO-56 no none EXS210042-01 1530 nm 2 mW 100 nm 550 mA Gaussian yes 14-BTF yes SMF EXS210095-01 1550 nm 30 mW 40 nm 500 mA Gaussian yes 14-BTF yes SMF EXS210073-01 1550 nm 12 mW 40 nm 250 mA Gaussian yes 14-BTF yes PMF EXS210094-01 1550 nm 12 mW 40 nm 300 mA Gaussian yes 14-BTF yes PMF EXS210070-01 1550 nm 15 mW 45 nm 300 mA Gaussian yes 14-BTF yes SMF EXS210069-01 1550 nm 20 mW 60 nm 500 mA Flat top yes 14-BTF yes SMF EXS210059-01 1550 nm 6 mW 60 nm 200 mA Gaussian no TO-56 no none EXS210085-01 1550 nm 5 mW 60 nm 250 mA Gaussian yes 14-BTF yes SMF EXS210019-03 1550 nm 2 mW 60 nm 200 mA Gaussian no TOSA yes SMF EXS210071-02 1550 nm 15 mW 90 nm 600 mA Gaussian yes 14-BTF yes SMF EXS210108-01 1550 nm 10 mW 90 nm 600 mA Gaussian yes 14-BTF yes SMF EXS210048-03 1550 nm 10 mW 60 nm 300 mA Flat top yes 14-BTF yes SMF EXS210054-01 1550 nm 4 mW 150 nm 350 mA Flat top yes 14-BTF yes SMF EXS210066-02 1570 nm 10 mW 65 nm 250 mA Flat top yes 14-BTF yes SMF EXS210055-01 1580 nm 20 mW 60 nm 500 mA Flat top yes 14-BTF yes SMF EXS210062-01    

Flexure Mechanism; Aluminum/Steel/Stainless Steel; Optic Size from 12.7 mm (0.5 inch) to 101.6 mm (4.0 inch); Different Thread Types The IXF series is a unique, monolithic flexure mount found nowhere else in the industry. Unlike other flexure designs, they have lockable 100TPI adjustment screws that have a rolled-cap design to guarantee that the flexure will not be forced past its elastic limit. Three versions are available: steel-bulkhead mounted, steel bulkhead/post mounted, and aluminum-bulkhead/post mounted. The steel-bulkhead mounted version (IXF1.0, IXF.75, and IXF.50) has 4-40 tapped holes on two sides and is electroless nickel plated. The steel-bulkhead/post version (IXF1.0i, IXF.75i, and IXF.50i) has the 4-40 tapped holes on only one side, and has 8-32 (M4) tapped holes on two edges, as well as lock screws for the fine pitch 100TPI adjustment screws. This model is also electroless nickel plated. For vacuum compatible and flight-ready applications, Siskiyou developed a method to produce a spring-loading effect in an aluminum version. The aluminum version (IXF1.0a, IXF.75a, and IXF.50a) has the same features and performance specifications as the steel bulkhead/post version.

Output Current LD 2, 5 A; Output Current TEC 5, 10 A; Benchtop or Rack Mount; Compatible with Type A, B & C Lasers  Wavelength Electronics’ LDTC LAB series of instrument type laser diode and TEC temperature controllers combine best-in-class low noise, high-end digital control laser diode driver technology with an IntelliTune® smart TEC temperature controller. If you need stable wavelength, stable temperature (better than 0.0009 °C with thermistors), stable laser diode current or power, or low noise (RMS laser driver noise as low as 7 µA), these offer the best performance and value. Two models are available, the LD2TC5 LAB and the LD5TC10 LAB. The LD2TC5 LAB outputs up to 2 and 5 A for the laser and thermoelectric, respectively. The LD5TC10 LAB outputs up to 5 and 10 A. Both models offer 10 V of laser compliance voltage and 15 V of thermoelectric compliance voltage. The touch-screen interface makes operation intuitive and simple. A LabVIEW® virtual instrument, remote command set, and USB interface allow integration into an instrument library. Operation in Constant Current (CC) or Constant Power (CP) mode changes with the touch of a button. A wide variety of sensors work in the temperature control feedback loop. Safety features protect the thermoelectric cooler (TEC) and the laser. Over- and under-temperature limits on the load, positive and negative (where applicable) current limits, and voltage limits can be set for both TEC and laser. If the sensor signal is lost or a short is detected at the TEC, output current is disabled. Passive and active interlocks are available for safety of equipment and user. Automatic laser shutdown upon TEC error is also available. You can link laser diode current to safe and stable thermoelectric operation. With Wavelength Electronics’ plug and play instrument, you have the ability to quickly set the controls using either the instrument touch screen or a remote computer, and results are easy to monitor. Wavelength Electronics’ proprietary IntelliTune® algorithm characterizes the TEC/sensor system’s response to the controller and determines the optimal PID control coefficients. It then automatically adjusts the PID control values as setpoint, tuning mode, or bias current change. Run IntelliTune® easily just off ambient and watch it change PID settings for a much higher or lower setpoint. After a single scan, explore either optimized Setpoint Response or Disturbance Rejection performance with your load to see which works best. Add or remove the D term to see if noise is an issue.IntelliTune® lets you skip the manual characterization and it’s smart enough to really work—very little adjustment is needed after you have stored a successful characterization scan. See Application Note IntelliTune® vs. Conventional Autotune for an in-depth exploration. An Interlock Kit containing a BNC terminator for the laser interlock and a pre-soldered DSUB to satisfy the laser interlocks is included with the instrument. Loose connectors for custom cable configuration are shipped with the unit. Full cables for both the laser connection and the thermoelectric connection are available. The LDMOUNT-5A, a 14-pin butterfly laser diode mount with integrated heat sinking, is available for simple connections between the LDTC LAB driver and the laser. Free, effective and responsive technical support is available to simplify integration of Wavelength products into your OEM design. Standard products can be easily modified to meet your application requirements. Get in touch with the AMS Technologies laser diode driver experts to discuss your customized solution! Key Features: Instrument Type, Benchtop Size: 98 x 224 x 450 mm Laser Cumulative Current Noise of 16 µA RMS Up to 5 A LD Current- Up to ±10 A TEC Current Supply Range: 100 to 240 VAC (±10%), 3 A, 50-60 Hz Compliance Voltage 10 V Laser & 15 V TEC Modulation Bandwidth: 450 kHz (CC Mode) Compatible With Most Sensor Types and all LD/PD Combinations Sensors Supported: Thermistors, 2-wire RTDs, Linear Current, Linear Voltage Temperature Coefficient: 25 ppm/°C- Temperature Stability Better Than 0.0009°C Modulation Input Bandwidth of 450 kHz (CC Mode) Intuitive User Interface Touchscreen Adjustable Current Limits, Over- and Under-temperature Protection IntelliTune® PID Temperature Control Remote Interface: USB Rise/Fall Time: 800 ns (to Full Scale, CC Mode) Applications: Medical Systems & Medical Diagnostic Equipment; Defence; Communications; Manufacturing Test; Particle and Droplet Measurement; Electro-optical Systems; Airborne Instrumentation; Spectroscopic Monitors

Gain Chip;FP Fabry Perot;790 nm;50 mW