EOLD-xxxx-3xx/5xx Molded Plastic LEDs

Accessories for Mightex collimated LED light sources comprise dedicated focusing modules and interchangeable collimating lenses, lightguide, microscope and fiber-optic adapters, microscope illumination tubes, connector tubes, a thread converter, empty filter/optics holders, a lightguide holder for converting Type-B LCS into Type-B GCS as well as accessories for beam combiners like a push-pull adjustable mount, a 11 mm LCS adapter or connecting plates. Six different ACC-LCS-F-xx focusing modules for collimated LED light sources are available, comprising modules for 11 to 48 mm clear-aperture collimated LED light sources with working distances from 5 to 100 mm. For details, please refer to the downloadable “Accessories for Collimated LED Light Sources Overview” and the downloadable installation drawings. Eight ACC-LCS-C-xx(-B) additional interchangeable collimating lenses for collimated LED light sources are used to produce different beam sizes with the same LED light source base: Four models with clear apertures of 11, 22, 38 and 48 mm as well as four variants for Type-B light sources. For details, please refer to the downloadable “Accessories for Collimated LED Light Sources Overview”. Four different LCS-LGA22-xxx lightguide adapters can be used to couple light from a 22-mm-diameter collimated LED light source into a lightguide. Variants for lightguides with ferrule diameters of 5, 6.35 (1/4”), 7 and 11.1 mm as well as a ferrule length of 15 mm or greater are available. For details, please refer to the downloadable “Accessories for Collimated LED Light Sources Overview” and the downloadable installation drawings. Eight different ACC-BC25-xxx microscope adapters allow to connect LCS collimated LED light sources and beam combiners to microscopes. Single LCS light sources as well as LCS-BC25 beam combiners or WLS sources can be connected to microscopes like Leica DMI, Olympus (IX & BX, other), Zeiss Axioskop, Nikon Eclipse, Eclipse E200 and LV-UEPI/2/A. For details, please refer to the downloadable “Accessories for Collimated LED Light Sources Overview”. A LCS-FPC-ADP-SMA fiber-optic adapter can be used to couple light from a LCS-Series collimated LED light source (22-mm aperture) into a fiber patchcord and accepts SMA connectorized fiber patchcords. Three different ACC-BC25-MIT-xxx microscope illumination tubes allow to couple a beam combiner or LCS-Series collimated LED light source into the infinity optical path of microscopes. The lengths of these microsope illumination tubes are designed for one beam-combiner distance (up to two LCS sources) or two beam-combiner distances (up to four LCS sources). For details, please refer to the downloadable installation drawing. Three different ACC-LCS-xxx connector tubes for LCS-Series collimated LED light sources are available, comprising a male-to-male C-mount connector with inner threads, a female-to-female C-mount connector with outer threads and a 15 mm extension tube for 22 mm clear-aperture LCS-Series light sources. For details, please refer to the downloadable “Accessories for Collimated LED Light Sources Overview” An ACC-LCS-27C adapter is available for converting M27 thread to C-thread. Two different empty filter/optics holders for 22 mm clear-aperture collimated LED light sources are available (ACC-LCS-H-22, ACC-LCS-EH). Both are excitation filter holders for 25.4 mm (1”) diameter filters with up to 5 mm thickness, with ACC-LCS-EH featuring a threaded output end to connect to Mightex LCS-LGA22-xxx lightguide adapters or ACC-BC25-xxx microscope adapters. For details, please refer to the downloadable “Accessories for Collimated LED Light Sources Overview” and the downloadable installation drawing. Mightex’s GCS-LGH-B-0515 lightguide holder is used to replace the collimating lens on a Type-B LCS in order to convert it to a Type-B GCS. This holder is suitable for lightguides with a ferrule diameter of 5 mm (typical 3-mm-core lightguides) and a ferrule length of 15 mm or greater. Mightex’s ACC-LCS-BC25-PPM push-pull mount for multi-wavelength beam combiners is user-adjustable. Currently, Mightex’s multi-wavelength beam combiners can only be used to directly combine 22-mm-diameter collimated LED light sources. For 11-mm-diameter collimated LED light sources, an ACC-BC25-011 mechanical adapter can be used to attach the LED sources to the beam combiners, before the 11-mm-diameter collimated LED sources can be combined. Three different ACC-BC25-CP-01/02/03 connecting plates are available to connect two or more multi-wavelength beam combiners together, with four screws included. For details, please refer to the downloadable “Accessories for Collimated LED Light Sources Overview” and the downloadable product overview.

Accessories for Mightex LED light sources comprise lightguide collimators, dedicated focusing modules for collimated LED light sources, various cables, fiber-optic adapters, microscope illumination tubes, connector tubes for LCS-Series light sources, a thread converter, empty filter/optics holders, a lightguide holder for converting Type-B LCS into Type-B GCS as well as accessories for beam combiners like a push-pull adjustable mount, a 11 mm LCS adapter or connecting plates. Four different lightguide collimators are used to either couple light from free space into a lightguide or collimate light from a lightguide to form a collimated (parallel) optical beam. Lightguide collimators are key components with numerous applications. For example, a lightguide collimator can project light from a lightguide into a uniform spot in free space. High-numerical-aperture aspherical lenses are used for precise collimation and maximum light throughput. The collimators feature adjustable focus from ~100 mm to infinity. Various lightguide ferrule diameters are supported. Customization is available for other ferrule diameters. For further details, please refer to the downloadable datasheet and the downloadable “Accessories for LED Light Sources Overview”. Six different ACC-LCS-F-xx focusing modules for collimated LED light sources are available, comprising modules for 11 to 48 mm clear-aperture collimated LED light sources with working distances from 5 to 100 mm. For details, please refer to the downloadable “Accessories for LED Light Sources Overview” and the downloadable installation drawings. Four different cables are available for FCS-, FFC-, GCS-, WFC- and WLS-Series LED light sources. Some cables feature push-pull connectors and/or are suitable for 4-channel light sources. For details, please refer to the downloadable “Accessories for LED Light Sources Overview”. A LCS-FPC-ADP-SMA fiber-optic adapter can be used to couple light from a LCS-Series collimated LED light source (22-mm aperture) into a fiber patchcord and accepts SMA connectorized fiber patchcords. Three different ACC-BC25-MIT-xxx microscope illumination tubes allow to couple a beam combiner or LCS-Series collimated LED light source into the infinity optical path of microscopes. The lengths of these microsope illumination tubes are designed for one beam-combiner distance (up to two LCS sources) or two beam-combiner distances (up to four LCS sources). For details, please refer to the downloadable installation drawing. Three different ACC-LCS-xxx connector tubes for LCS-Series collimated LED light sources are available, comprising a male-to-male C-mount connector with inner threads, a female-to-female C-mount connector with outer threads and a 15 mm extension tube for 22 mm clear-aperture LCS-Series light sources. For details, please refer to the downloadable “Accessories for LED Light Sources Overview”. An ACC-LCS-27C adapter is available for converting M27 thread to C-thread. Two different empty filter/optics holders for 22 mm clear-aperture collimated LED light sources are available (ACC-LCS-H-22, ACC-LCS-EH). Both are excitation filter holders for 25.4 mm (1”) diameter filters with up to 5 mm thickness, with ACC-LCS-EH featuring a threaded output end to connect to Mightex LCS-LGA22-xxx lightguide adapters or ACC-BC25-xxx microscope adapters. For details, please refer to the downloadable “Accessories for LED Light Sources Overview” and the downloadable installation drawing. Mightex’s GCS-LGH-B-0515 lightguide holder is used to replace the collimating lens on a Type-B LCS in order to convert it to a Type-B GCS. This holder is suitable for lightguides with a ferrule diameter of 5 mm (typical 3-mm-core lightguides) and a ferrule length of 15 mm or greater. Mightex’s ACC-LCS-BC25-PPM push-pull mount for multi-wavelength beam combiners is user-adjustable. Currently, Mightex’s multi-wavelength beam combiners can only be used to directly combine 22-mm-diameter collimated LED light sources. For 11-mm-diameter collimated LED light sources, an ACC-BC25-011 mechanical adapter can be used to attach the LED sources to the beam combiners, before the 11-mm-diameter collimated LED sources can be combined. Three different ACC-BC25-CP-01/02/03 connecting plates are available to connect two or more multi-wavelength beam combiners together, with four screws included. For details, please refer to the downloadable “Accessories for LED Light Sources Overview” and the downloadable product overview.

Accessories for Mightex’s GCS-Series of lightguide-coupled LED light sources comprise an electrical cable (product number ACC-GCS-C05), a heatsink for 3 mm core liquid lightguides (product number ACC-LLG-HS-03), a range of liquid lightguides and lightguide adapters as well as lightguide collimators. Nine different LLG liquid lightguides are available in three wavelength ranges (300 to 650 nm, 340 to 800 nm and 420 to 2000 nm), with 3 or 5 mm core for 5 or 7 mm ferrule diameters respectively, a numerical aperture (NA) of 0.59 and lengths of 1 or 2 m. For details, please refer to the downloadable “Accessories for Lightguide-coupled LED Light Sources Overview” and the downloadable installation drawing. Four different lightguide adapters for Type-A GCS-Series lightguide-coupled LED light sources are available. Each Type-A GCS device comes with a standard lightguide adapter for 5 mm diameter ferrule (A0510). Other adapters (as well as additional standard adapters) can be purchased separately, for lightguides with ferrule diameters of 5, 6, 7 or 8 mm and ferrule lengths of 10 mm or greater. For details, please refer to the downloadable “Accessories for Lightguide-coupled LED Light Sources Overview”. Four different lightguide adapters for Type-B GCS-Series lightguide-coupled LED light sources are available, for lightguides with ferrule diameters of 5, 7, 8 or 10 mm and ferrule lengths of 15 mm or greater. For details, please refer to the downloadable “Accessories for Lightguide-coupled LED Light Sources Overview”. Four different lightguide collimators are used to either couple light from free space into a lightguide or collimate light from a lightguide to form a collimated (parallel) optical beam. Lightguide collimators are key components with numerous applications. For example, a lightguide collimator can project light from a lightguide into a uniform spot in free space.High-numerical-aperture aspherical lenses are used for precise collimation and maximum light throughput. The collimators feature adjustable focus from ~100 mm to infinity. Various lightguide ferrule diameters are supported. Customization is available for other ferrule diameters. For further details, please refer to the downloadable datasheet and the downloadable “Accessories for Lightguide-coupled LED Light Sources Overview”.

Deep UV; 265-340 nm; 2.03-3.6 W; Iop 350-600 mA; Vop 4.3-6.3 V; Typ. Output Power 15-35 mW Mightex’s deep UV LCS-Series of collimated LED light sources cover the wavelength range between 240 nm and 340 nm and employ a high-NA (numerical aperture) aspherical collimating lens for precision collimation and high light throughput. A LED collimator consists of a collimating lens and a LED emitter. The LED emitter is placed at the focal plane of the collimating lens. The collimating lens thus images the LED emitter into infinity. LED collimators can be used as the light source in an illumination system. For example, LED collimators can replace the standard lamp assembly in a microscope to provide stable, intense, and fast-modulated illumination. Typically, the rest of the illumination optics will image the LED emitter onto the pupil of the imaging optics whereas the lens aperture on the collimator where intensity is uniform will be projected onto the object. In other illumination applications, similar arrangement should be made to produce uniform and efficient illumination. The LED emitters of the deep UV LCS-Series collimated LED light sources are mounted directly onto the metal base of the collimator which also features an integrated heat sink. This configuration minimizes thermal resistance between the LED emitter and the heat sink resulting in better heat dissipation. The collimating lens can be adjusted if needed for precise collimation. A locking ring fixes the lens position after adjustment. The collimators have been pre-adjusted in the factory. The LED collimators include a 1.5-meter cable with two bare-wire terminals at the end for universal LED controllers. The light sources can be driven by Mightex LED controllers or other LED controllers and current sources. WARNING: Due to low current ratings, certain Type-D deep UV LCS-Series collimated LEDs should only be controlled using the LED controllers SLA-0100-2 or SLC-FAxxIn addition to using the correct LED controllers listed above, an appropriate current range must be set according to the LED’s current rating, in order to properly protect the highly delicate deep UV LED. LED damage due to over-driving is not covered by Mightex’s product warranty. Key Features: Deep UV Wavelength Range: 265 to 340 nm Interchangeable Aspherical Collimating Lens High Numerical Aperture (NA)- Typical Collimated Output Power 15 to 35 mW Adjustable Focus Optional Focusing Module Optional Lightguide Adapter Multiple Mounting Features for Lab and OEM Applications Integrated Heatsink Applications: Microscope Illuminator; General Purpose Deep UV Light Source; Fiber Coupling (With Optional Focusing Module)

660 nm; Visible, Red; GaAsP/GaAs Diffusion Type; Luminous Intensity/Segment 80-400 µcd LED display chips enable to present numbers, letters and symbols. EPIGAP Optronic’s EODC-660-19-xx series of monolithic LED display chips provide various functionality and information in optical instruments. Each segment is separately addressable. The red colour (660 nm) of these GaAsP-based chips is visible at low currents, resulting in extended battery life in battery-powered, mobile, portable optical instruments. Various customized layouts like digits and symbols are available from development to serial product, with up to 30 segments per chip and multi-chip feasible. Please contact the AMS Technologies display LED chip experts to find the right solution that meets your design project’s requirements. We would like to support you and look forward to your inquiries! Further specialized LED chips provided by EPIGAP Optronic are EOLC-xxx-19-xx Point Source LED Chips. EPIGAP Optronic’s standard LED components are also available as standard bare LED chips (EOLC series) with high efficiency and very good degradation stability as well as standard components mounted in different packages. For further details, please refer to the series EOLD-xxxx-3xx/5xx Molded Plastic LEDs, EOLD-xxxx-0xx Hermetic TO LEDs and EOLS SMD LEDs. Key Features: Emission Colour: Red (660 nm) With High Brilliance and Contour Sharpness GaAsP/GaAs Diffusion Type Small Character Size: 7-segment Chip With Overall Height of 0.5 mm to 1.5 mm Line Width: Typically 25 µm Luminous Intensity per Segment: 80 µcd to 400 µcd Low Drive Current Supporting Battery-driven Portable Devices Customized Layouts Available From Development to Serial Product (up to 30 Segments per Chip, Multi-chip Feasible) Applications: Binoculars; Spotting Scopes; Microscopes

355-1720 nm; UV, Visible, IR; Radiant Power 1-90 mW; Luminous Intensity 140-11,000 mcd The starting point for any optoelectronic solution is the LED chip, which essentially determines the future product characteristics of the LEDs. EPIGAP Optronic provides the EOLC series of high-end LED chips from 355 nm in the UV range up to 1720 nm in the infrared range with high efficiency and very good degradation stability These LED chips with chip sizes from 265 x 265 μm to 365 x 365 μm feature a low variance of optical and electrical parameters. Excellent measuring technology supports production and ensures compliance with the quality requirements. This allows the chips to be selected according to optical and electrical parameters with an accuracy of up to ±3 nm. All LED chips undergo high-speed tests with 100 % analyzed spectrum as well as analysis for secondary and side peak, analysis for FWHM. Visual inspection for displays is provided as well as additional visual inspection for homogeneity of emitting intensity on request. Highly efficient power LED chips are available in the spectral range from 365 nm (UV) to 1050 nm (NIR) with high degradation stability and lifetime testing. Chip sizes of power LED chips range from 650 x 650 μm up to 1000 x 1000 μm or even more. The variety of chips in terms of wavelength, chip size and polarity is EPIGAP Optronic’s strength and allows for the selection and adaptation to the specifications of your application. Please contact the AMS Technologies LED experts to find the right standard or customized product that meets your design project’s requirements. We would like to support you and look forward to your inquiries! In addition to the EOLC series of standard LED chips, EPIGAP Optronic’s portfolio includes special chips like EOLC-xxx-19-xx point source LED chips or EODC-660-19-xx monolithic LED display chips for optical systems. EPIGAP Optronic’s LED chips are also available as standard components mounted in different packages. For further details, please refer to the series EOLD-xxxx-3xx/5xx Molded Plastic LEDs, EOLD-xxxx-0xx Hermetic TO LEDs and EOLS SMD LEDs. Applications: Industrial Sensors; Automation; Security and Safety Technology; Diagnostics; Biomedical Technology; Medical Imaging; Analytical Instruments; Scientific Analysis; Photo Catalyst; Medical Phototherapy; UV Curing; UV Sterilization

572-850 nm; Visible, IR; Radiant Power 0.005-1.8 mW; Luminous Intensity 0.09-40 mcd; Emission Area Diameter 10-100 µm EPIGAP Optronics’ EOLC-xxx-19-xx series of point source LED chips is designed to form a parallel light beam. The double wire bond construction on top eliminates any obstruction and dark spots. Available wavelengths are green (572 nm), red (625 nm and 650 nm) and infrared (850 nm) with apertures of emitting area Ø 10 µm, Ø 25 µm, Ø 50 µm and Ø 100 µm. EOLC-xxx-19-xx point source LED chips provide a very narrow, defined and precise beam and an optional ball lens. They offer effective suppression of undesirable side radiation along with simple collimation and feature high coupling efficiency to optical fibers Custom aperture sizes as well as different packages are available on request – please contact the AMS Technologies LED experts to find the right standard or customized point source LED product that meets your design project’s requirements. Further specialized LED chips provided by EPIGAP Optronic are EODC-660-19-xx monolithic LED display chips for optical systems. EPIGAP Optronic’s standard LED components are also available as standard bare LED chips (EOLC series) with high efficiency and very good degradation stability as well as standard components mounted in different packages. For further details, please refer to the series EOLD-xxxx-3xx/5xx Molded Plastic LEDs, EOLD-xxxx-0xx Hermetic TO LEDs and EOLS SMD LEDs. Key Features: Geometrically Well-defined Light Sources for High-accuracy Applications High Reliability Long Lifetime High Efficiency Improved Pulsing / Flashing Speeds Low Power Consumption Green, Red and Infrared Versions Available Wavelength Range: 572 nm to 850 nm Emission Area Diameter: 10 µm, 25 µm, 50 µm, 100 µm 625 nm Versions Also Available in SMD 4040 (EOLS-625-192-25/50) and Ceramic SMD 2520 Package (EOLS-625-199-50) Other Packages and Custom Aperture Sizes on Request Applications: Encoders; Positioning; Fiber Communication; Distance and Range Finding Indication; Fluorescence Analysis; Medical Instruments Such as Endoscopes; Optical Sights

255-1720 nm; UV, Visible, IR; Radiant Power 0.8-8 mW; Viewing Angle 6°-114°; Package TO-05, TO-18, TO-39, TO-46 With the EOLD-xxxx-0xx series, EPIGAP Optronic provides a variety of different LEDs in hermetic TO cases as standard products, featuring high efficiency and degradation stability. TO metal case options with TO‐05, TO‐18, TO‐39 or TO‐46 package are available, equipped with flat window cap or lens cap. The package, lens shapes, viewing angle and wavelength in the range from 255 nm (UV) to 1750 nm (infrared) can be adapted to the application. EPIGAP Optronic manufactures samples and series for standard LEDs and customer-specific components according to your specifications. If you should not see the exact configuration that meets your design project’s requirements, please contact the AMS Technologies LED experts to find the right standard or customized product. EPIGAP Optronic’s LED components are also available in molded plastic cases (EOLD-xxxx-3xx/5xx series) and SMD packages (EOLS series) as well as bare LED chips (EOLC series) with high efficiency and very good degradation stability. The supplier’s variety of chips in terms of wavelength, chip size and polarity allow for the selection and adaptation to the requirements of your application. The portfolio includes special chips like EOLC-xxx-19-xx point source LED chips or EODC-660-19-xx monolithic LED display chips for optical systems. Key Features: Product Wavelength Package Luminous Intensity Radiant Power Viewing Angle Downloads EOLD-255-092 255 nm TO-46   1.25 mW 100° Datasheet EOLD-255-012 255 nm TO-46   1 mW 6° Datasheet EOLD-265-092 265 nm TO-46   1.35 mW 100° Datasheet EOLD-265-012 265 nm TO-46   1.1 mW 6° Datasheet EOLD-275-092 275 nm TO-46   2.2 mW 100° Datasheet EOLD-275-012 275 nm TO-46   1.6 mW 6° Datasheet EOLD-310-013 310 nm TO-46   0.9 mW 6° Datasheet EOLD-310-023 310 nm TO-18   1.2 mW 24° Datasheet EOLD-310-043 310 nm TO-18   1.2 mW 40° Datasheet EOLD-310-093 310 nm TO-18   1.2 mW 113° Datasheet EOLD-310-093-1 310 nm TO-5   1.5 mW 114° Datasheet EOLD-310-013-6 310 nm TO-5   0.8 mW 6° Datasheet EOLD-325-013 325 nm TO-46   1 mW 6° Datasheet EOLD-325-023 325 nm TO-18   1.5 mW 24° Datasheet EOLD-325-043 325 nm TO-18   1.4 mW 40° Datasheet EOLD-325-093 325 nm TO-18   1.2 mW 113° Datasheet EOLD-325-093-1 325 nm TO-39   1.7 mW 114° Datasheet EOLD-325-013-6 325 nm TO-5   1 mW 6° Datasheet EOLD-340-013 340 nm TO-46   0.9 mW 6° Datasheet EOLD-340-023 340 nm TO-18   1.3 mW 24° Datasheet EOLD-340-043 340 nm TO-18   1.3 mW 40° Datasheet EOLD-340-093 340 nm TO-18   1.3 mW 113° Datasheet EOLD-340-093-1 340 nm TO-5   1.7 mW 114° Datasheet EOLD-340-013-6 340 nm TO-5   1 mW 6° Datasheet EOLD-365-012 365 nm TO-18   1.5 mW 10° Datasheet EOLD-365-092 365 nm TO-18   1.5 mW 90° Datasheet EOLD-370-012 370 nm TO-46   1.5 mW 10° Datasheet EOLD-460-013 460 nm TO-46 16000 mcd 8 mW 10° Datasheet EOLD-470-013-2 470 nm TO-46   4 mW 12° Datasheet EOLD-810-095-4 810 nm TO-46   2.2 mW 90° Datasheet EOLD-880-015-1 880 nm TO-46   1.8 mW 6° Datasheet EOLD-940-015 940 nm TO-46   5 mW 6° Datasheet EOLD-1050-015 1050 nm TO-46   1.6 mW 6° Datasheet EOLD-1050-095 1050 nm TO-46   5 mW 40° Datasheet EOLD-1060-015 1060 nm TO-46   1.6 mW 6° Datasheet EOLD-1200-015 1200 nm TO-46   1.5 mW 6° Datasheet EOLD-1200-095 1200 nm TO-46   1.5 mW 50° Datasheet EOLD-1300-015 1300 nm TO-46   1.6 mW 6° Datasheet EOLD-1300-095 1300 nm TO-46   1.6 mW 50° Datasheet EOLD-1450-015 1450 nm TO-46   1.5 mW 6° Datasheet EOLD-1650-015 1650 nm TO-46   1 mW 6° Datasheet EOLD-1720-015 1720 nm TO-46   1 mW 6° Datasheet EOLD-1720-095 1720 nm TO-46   1 mW 50° Datasheet   Applications: Industrial Sensors; Automation; Security and Safety Technology; Diagnostics; Biomedical Technology; Medical Imaging; Analytical Instruments; Scientific Analysis; Photo Catalyst; Medical Phototherapy; UV Curing; UV Sterilization

310-1650 nm; UV, Visible, IR; Radiant Power 0.8-150 mW; Luminous Intensity 180-15,000 mcd; Viewing Angle 20°-140°; Package SMD, Ceramic SMD, SMD Sideview, PLCC4 With the EOLS series, EPIGAP Optronic provides a variety of different LEDs in SMD cases as standard products, featuring viewing angles from 40° to 180°, with normal and special squint lens types. Standard SMD packages include 1206, 0805, PLCC4, Sidelooker and Ceramic. Different layouts are available with 1 to 4 chips as well as with power chips. This series’ thermal resistivity of about 150 K/W allows a power dissipation of <100 mW. The package, lens shapes, viewing angle and wavelength in the range from 255 nm (UV) to 1750 nm (infrared) can be adapted to the application. EPIGAP Optronic manufactures samples and series for standard LEDs and customer-specific components according to your specifications. If you should not see the exact configuration that meets your design project’s requirements, please contact the AMS Technologies LED experts to find the right standard or customized product. EPIGAP Optronic’s LED components are also available in molded plastic cases (EOLD-xxxx-3xx/5xx series) and hermetic TO cases (EOLD-xxxx-0xx series) as well as bare LED chips (EOLC series) with high efficiency and very good degradation stability. The supplier’s variety of chips in terms of wavelength, chip size and polarity allow for the selection and adaptation to the requirements of your application. The portfolio includes special chips like EOLC-xxx-19-xx point source LED chips or EODC-660-19-xx monolithic LED display chips for optical systems. Key Features: Product Wavelength Package Luminous Intensity Radiant Power Viewing Angle Downloads EOLS-310-695 310 nm Ceramic SMD 3535   12 mW 120° Datasheet EOLS-310-697 310 nm Ceramic SMD 3535   50 mW 120° Datasheet EOLS-310-637 310 nm Ceramic SMD 3535   43 mW 35° Datasheet EOLS-310-667 310 nm Ceramic SMD 3535   47 mW 65° Datasheet EOLS-325-695 325 nm Ceramic SMD 3535   10 mW 120° Datasheet EOLS-325-697 325 nm Ceramic SMD 3535   47 mW 120° Datasheet EOLS-325-637 325 nm Ceramic SMD 3535   41 mW 35° Datasheet EOLS-325-667 325 nm Ceramic SMD 3535   45 mW 65° Datasheet EOLS-340-695 340 nm Ceramic SMD 3535   12 mW 120° Datasheet EOLS-340-697 340 nm Ceramic SMD 3535   44 mW 120° Datasheet EOLS-340-637 340 nm Ceramic SMD 3535   41 mW 35° Datasheet EOLS-340-667 340 nm Ceramic SMD 3535   44 mW 65° Datasheet EOLS-360-393 360 nm Ceramic SMD 3020   1.1 mW 115° Datasheet EOLS-400-393 400 nm Ceramic SMD 3020   16 mW 115° Datasheet EOLS-405-496 405 nm Ceramic SMD 3838   1150 mW 120° Datasheet EOLS-420-227 420 nm Ceramic SMD 6046   265 mW 20° Datasheet EOLS-430-392 430 nm Ceramic SMD 3020   16 mW 115° Datasheet EOLS-440-227 440 nm Ceramic SMD 6046   445 mW 20° Datasheet EOLS-460-590 460 nm SMD 3018 sideview 180 mcd   120° Datasheet EOLS-460-227 460 nm Ceramic SMD 6046   305 mW 20° Datasheet EOLS-470-496 470 nm Ceramic SMD 3838   600 mW 120° Datasheet EOLS-470-590 470 nm SMD 3018 sideview 240 mcd   120° Datasheet EOLS-480-227 480 nm Ceramic SMD 6046   190 mW 20° Datasheet EOLS-490-227 490 nm Ceramic SMD 6046   190 mW 20° Datasheet EOLS-505-227 505 nm Ceramic SMD 6046   200 mW 20° Datasheet EOLS-525-843 525 nm SMD 1206 3550 mcd   40° Datasheet EOLS-528-227 528 nm Ceramic SMD 6046   110 mW 20° Datasheet EOLS-533-496 533 nm Ceramic SMD 3838   280 mW 120° Datasheet EOLS-545-496 545 nm Ceramic SMD 3838 15000 mcd 110 mW 120° Datasheet EOLS-545-227 545 nm Ceramic SMD 6046   105 mW 20° Datasheet EOLS-565-496 565 nm Ceramic SMD 3838   110 mW 120° Datasheet EOLS-570-227 570 nm Ceramic SMD 6046   4 mW 20° Datasheet EOLS-590-843 590 nm SMD 1206 1400 mcd   40° Datasheet EOLS-590-227 590 nm Ceramic SMD 6046   57 mW 20° Datasheet EOLS-600-496 600 nm Ceramic SMD 3838 10000 mcd   120° Datasheet EOLS-610-227 610 nm Ceramic SMD 6046   30 mW 20° Datasheet EOLS-630-227 630 nm Ceramic SMD 6046   150 mW 20° Datasheet EOLS-635-496-1 635 nm Ceramic SMD 3838   350 mW 120° Datasheet EOLS-645-227 645 nm Ceramic SMD 6046   190 mW 20° Datasheet EOLS-660-496 660 nm Ceramic SMD 3838   165 mW 120° Datasheet EOLS-660-227 660 nm Ceramic SMD 6046   215 mW 20° Datasheet EOLS-670-199 670 nm SMD 1206   1.5 mW 140° Datasheet EOLS-680-227 680 nm Ceramic SMD 6046   250 mW 20° Datasheet EOLS-690-496 690 nm Ceramic SMD 3838   45 mW 120° Datasheet EOLS-700-227 700 nm Ceramic SMD 6046   36 mW 20° Datasheet EOLS-700-496 700 nm Ceramic SMD 3838   36 mW 120° Datasheet EOLS-720-227 720 nm Ceramic SMD 6046   42 mW 20° Datasheet EOLS-740-843 740 nm SMD 1206   10 mW 40° Datasheet EOLS-740-496 740 nm Ceramic SMD 3838   42 mW 120° Datasheet EOLS-760-227 760 nm Ceramic SMD 6046   44 mW 20° Datasheet EOLS-765-496 765 nm Ceramic SMD 3838   44 mW 120° Datasheet EOLS-770-496 770 nm Ceramic SMD 3838   44 mW 120° Datasheet EOLS-780-227 780 nm Ceramic SMD 6046   52 mW 20° Datasheet EOLS-800-227 800 nm Ceramic SMD 6046   38 mW 20° Datasheet EOLS-800-496 800 nm Ceramic SMD 3838   38 mW 120° Datasheet EOLS-810-843 810 nm SMD 1206    mW 40° Datasheet EOLS-810-496 810 nm Ceramic SMD 3838   38 mW 120° Datasheet EOLS-840-843 840 nm SMD 1206   13.5 mW 40° Datasheet EOLS-855-496 855 nm Ceramic SMD 3838   110 mW 120° Datasheet EOLS-855-227 855 nm Ceramic SMD 6046   910 mW/sr 20° Datasheet EOLS-870-496 870 nm Ceramic SMD 3838   38 mW 120° Datasheet EOLS-880-195 880 nm SMD 1206   5 mW 140° Datasheet EOLS-880-590 880 nm SMD 3018 sideview   5 mW 120° Datasheet EOLS-880-496 880 nm Ceramic SMD 3838   38 mW 120° Datasheet EOLS-915-995 915 nm PLCC4   4.5 mW 90° Datasheet EOLS-920-995 920 nm PLCC4   4.5 mW 90° Datasheet EOLS-940-590 940 nm SMD 3018 sideview   4.6 mW 120° Datasheet EOLS-940-843 940 nm SMD 1206   13.5 mW 40° Datasheet EOLS-950-843 950 nm SMD 1206   4.6 mW 40° Datasheet EOLS-970-195 970 nm SMD 1206   3 mW 140° Datasheet EOLS-1020-590 1020 nm SMD 3018 sideview   10 mW 120° Datasheet EOLS-1020-843 1020 nm SMD 1206   10 mW 40° Datasheet EOLS-1020-496 1020 nm Ceramic SMD 3838   38 mW 120° Datasheet EOLS-1050-995 1050 nm PLCC4   7.5 mW 90° Datasheet EOLS-1050-199 1050 nm SMD 1206   3 mW 140° Datasheet EOLS-1050-496 1050 nm Ceramic SMD 3838   38 mW 120° Datasheet EOLS-1070-496 1070 nm Ceramic SMD 3838   38 mW 120° Datasheet EOLS-1200-995 1200 nm PLCC4   1.8 mW 90° Datasheet EOLS-1200-199 1200 nm SMD 1206   5 mW 140° Datasheet EOLS-1200-843 1200 nm SMD 1206   5 mW 40° Datasheet EOLS-1300-995 1300 nm PLCC4   1.8 mW 90° Datasheet EOLS-1300-194 1300 nm SMD 1206   11 mW 40° Datasheet EOLS-1300-843 1300 nm SMD 1206   5 mW 40° Datasheet EOLS-1450-995 1450 nm PLCC4   1.8 mW 90° Datasheet EOLS-1450-199 1450 nm SMD 1206   2 mW 140° Datasheet EOLS-1450-843 1450 nm SMD 1206   2 mW 40° Datasheet EOLS-1550-995 1550 nm PLCC4   0.8 mW 90° Datasheet EOLS-1550-199 1550 nm SMD 1206   1.7 mW 140° Datasheet EOLS-1550-843 1550 nm SMD 1206   1.7 mW 40° Datasheet EOLS-1550-496 1550 nm Ceramic SMD 3838   54 mW 120° Datasheet EOLS-1650-995 1650 nm PLCC4   0.8 mW 90° Datasheet EOLS-1650-199 1650 nm SMD 1206   1.7 mW 140° Datasheet EOLS-1650-843 1650 nm SMD 1206   1.7 mW 40° Datasheet Applications: Industrial Sensors; Automation; Security and Safety Technology; Diagnostics; Biomedical Technology; Medical Imaging; Analytical Instruments; Scientific Analysis; Photo Catalyst; Medical Phototherapy; UV Curing; UV Sterilization

365-1750 nm; Low- or High-Power; Package Molded 3, 4, 5 mm or SMT; Flat or Lensed Based on reliable technologies and over 25 years of experience, Ushio Europe’s Epitex Series of single-chip LEDs cover all wavelengths in the UV, visible and IR spectra, from 365 nm to 1750 nm. Ushio Europe’s custom-made chip technologies and packaging technologies allow strong collaboration and support in product development with the customer from start to finish. Within the Epitex Series, Ushio Europe offers a wide range of high-quality LED chip products. They are available in different intensities and sizes, suitable for each and any application. It is also possible to produce LED chips to customer specifications, so if the chip you need is not part of our selection, please contact the AMS Technologies LED experts – we’ll be happy to help you. Customers can choose a suitable wavelength product for the application from Ushio Europe’s Epitex Series product range, which is available every 20 nm (below 1000 nm) and every 100 nm (over 1000 nm). Epitex Series single-chip LEDs are available as mold types with diameters of 3 mm, 4 mm or 5 mm. but also in surface mount packages (SMT). The SMT family of surface mount type (TOP) LEDs with wavelengths from 375 nm to 1650 nm features a 3.5 mm x 2.8 mm package, either as flat type or with epoxy or silicone resin lens. Ushio Europe’s SMBB family comprises high-power TOP LEDs with wavelengths from 365 nm to 1650 nm in a 5 mm x 5 mm package, either as flat type or with -02, -03 or -05 lens. The EDC family of surface mount type high-power TOP LEDs with wavelengths from 365 nm to 1650 nm features a 3.5 mm x 3.5 mm ceramics package with standard type or S5 lens. Ushio Europe’s D-Series comprises SWIR Chip LEDs with wavelengths from 1050 nm to 1750 nm and a chip side length of 350 µm. Key Features: Customised Specifications Wide Range of Wavelengths in the UV, Visible and IR Spectra: 365 nm to 1750 nm Various Models Supporting All Output Ranges From Low Power to High Power Highest Power for SWIR (Short Wavelength Infrared) LEDs Wide Range of Packages Applications: Especially Suited for Optical Analysis; Scientific Measurement & Analysis; Blood Analysers; Optical Pattern Recognition; Curing; Medical Visualisation; Genetic Testing; Medical Treatment; Optical Topography; Ophthalmoscopes; Food Sorting; Material Identification; Visual Inspection; Solar Panel Inspection; Sun Simulators; Oximeters; Colour Section; Iris Authentication; Encoders; Agricultural Biotechnology; Recycling

LED Module; 340-980 nm; Typical Radiant Flux 12-2,200 mW; Iop 0.35-18 A; Vop 1.4-15.5 V Mightex’s GCS-Series of high-power lightguide-coupled LED light sources are designed for high-efficiency coupling of LED light into a liquid lightguide (LLG) or a fiber optic bundle. Virtually all lightguides with core diameters ranging from 3 to 8 mm can be used with the GCS-Series light sources. Please note that lightguides and adapters as well as lightguide collimators are sold separately. GCS-Series lightguide-coupled LED light sources also feature a locking electrical connector for secured connection. The devices are designed as a universal light source for general lab use and OEM applications. Their one-piece machined aluminium alloy housing features integrated heatsinks and multiple mounting holes. Multi-chip LED emitters have been added to the product portfolio (Type-B). Some of these 7 to 15 W LEDs have a total optical power exceeding 1 W, quadrupling the power of a single-chip LED (Type-A). Models with higher powers (i.e. Type-B with 7 W and higher) feature a cooling fan and have a different form factor compared to other models. Please examine the installation drawings in the downloadable datasheet carefully. Power supply for the cooling fan is included in the price of the LED light sources. All Mightex LED controllers such as software-controlled LED controllers like the SLC-Series , manual LED controllers like the SLA-Series or other LED drivers and current sources can be used to drive the GCS-Series light sources. Key Features: High-power UV/VIS/NIR/White Lightguide-coupled LEDs Broad Wavelength Range: 340 to 980 nm (UV, VIS Visible, NIR Near Infrared), 3000 to 6500 K for White LED Versions Typical Radiant Flux: 12 mW to 2.2 W Iop: 350 mA to 18 A Vop: 1.4 to 15.5 V Interchangeable Liquid Lightguides or Fiber Bundles Compact, Machined Metal Housing With Integrated Heat Sink Multiple Mounting Features for Lab and OEM Applications Locking Electrical Connector Applications: Microscopy; Fluorescence; Machine Vision; Sensors; Semiconductor Equipment; Testing Instruments; Medical Instruments

UV-NIR; 365-980 nm; 0.84-15 W; Iop 350-3,500 mA; Vop 1.4-15.5 V; Typ. Output Power 30-1,500 mW Mightex’s high-power LCS-Series of collimated LED light sources employ a high-NA (numerical aperture) aspherical collimating lens for precision collimation and high light throughput. Four mechanically differing sub-series with clear apertures of 11, 22, 38 and 48 mm are available. A LED collimator consists of a collimating lens and a LED emitter. The LED emitter is placed at the focal plane of the collimating lens. The collimating lens thus images the LED emitter into infinity. LED collimators can be used as the light source in an illumination system. For example, LED collimators can replace the standard lamp assembly in a microscope to provide stable, intense, and fast-modulated illumination. Typically, the rest of the illumination optics will image the LED emitter onto the pupil of the imaging optics whereas the lens aperture on the collimator where intensity is uniform will be projected onto the object. In other illumination applications, similar arrangement should be made to produce uniform and efficient illumination. The LED emitters of the high-power LCS-Series collimated LED light sources are mounted directly onto the metal base of the collimator which also features an integrated heat sink. This configuration minimizes thermal resistance between the LED emitter and the heat sink resulting in better heat dissipation. The collimating lens can be adjusted if needed for precise collimation. A locking ring fixes the lens position after adjustment. The collimators have been pre-adjusted in the factory. Multi-chip LED emitters (i.e. Type-B) have been added to the high-power LCS-Series product portfolio. Some of these 7 W to 15 W LEDs have total optical power exceeding 1 W, quadrupling the power of a single-chip LED. Such Type-B models with higher powers (7 W and higher) feature a cooling fan and have a different form factor compared to other models. Please examine the installation drawings carefully. Power supply for the cooling fan is included in the price of the Type-B LCS-Series of collimated LED light sources. The LED collimators include a 1.5-meter cable with two bare-wire terminals at the end for universal LED controllers. Models with 22 or 48 mm clear aperture are also available connectorized for Mightex BLS-Series LED controllers. The light sources can be driven by Mightex LED controllers or other LED controllers and current sources. An optional focusing module can be mounted on the front of the LED collimator to focus light into a tight spot which is an image of the LED emitter. One of the applications with the focusing module is coupling LED light into a fiber or a lightguide. Additional interchangeable collimating lenses are available to produce different beam sizes with the same light source. Key Features: Interchangeable Aspherical Collimating Lens High Numerical Aperture (NA) High-power Emitters (up to 50 W) Wide Range of Available Wavelengths: 365 to 980 nm, 3000 to 6500 K for White LED Versions High Typical Collimated Output Power: 30 to 1,500 mW Adjustable Focus Optional Focusing Module Optional Lightguide Adapter Multiple Mounting Features for Lab and OEM Applications Integrated Heatsink Cooling Fan for >7 W Models Applications: Microscope Illuminator; General Purpose Light Source; Fiber Coupling (With Optional Focusing Module)