ATC-NE-M1 NEOLEAN-M Cleaning Tools for Optics

152.4 mm X 88.9 mm, 0.015 °C/W, tubed cold plate.The CP10™ 4-pass is a cost-effective, single-sided aluminum cold plate available with either copper or stainless steel tubes. It is ideal for component cooling applications where the heat load is low-to-moderate. Our range of standard tubed cold plates provide cost-effective thermal solutions for component cooling applications where the heat load is low-to-moderate. These tubed cold plates consist of copper or stainless steel tubes pressed into a channeled aluminum extrusion. This “Press-Lock” technology eliminates the need for performance-limiting epoxy between the tube and the plate, resulting in superior thermal performance. Each tubed cold plate has a single tube with no joint, ensuring leak-free operation.

The WEV302 thermal solution kit can be used with following laser diode drivers and temperature controllers from Wavelength Electronics: WTCP5V5A, WTC3243, WTC3243HB, WHY5640, WLD3343, WLD3343-2L, WLD3343-3A, WLD3343-3L or WLD3343HB. The controllers operate to 500 mA without any additional heatsinking (assuming 5 V operation). To operate up to 1 A, add the WTW002 thermal washer and the WHS302 heatsink. To operate to the full 2.2 A, add a fan WXC303 (5 V) or WXC304 (12 V). For convenience, a kit with two 0.75" and two 1" screws is available: WXC305. The WEV302 includes the WTW002 thermal washer, the WHS302 heatsink, the WXC305 screw kit, and a +12 V fan WXC304. Two other kits are available: WEV300 (includes thermal washer, heatsink, and screw kit) or WEV301 (includes thermal washer, heatsink, screw kit, and a +5 V fan).Key Features Extends the Safe Operating Area of the WLD, WTC, WTCP, and WHY to the full-rated output current Allows the WLD, WTC, and WHY to operate at higher ambient temperatures Two fan voltage options: 5 V and 12 V  

5 inch Disc; Silicon Dioxide; Ceramic Ferrule; no PSAThe ADS film can be used for final polishing for optical fiber connector end-face.The ADS film offers longer life cycle for the optical connector polishing.NTT Advanced Technology Corporation’s ADS series of final polishing films is ideal for the final polish of optical connector end faces and offers longer polishing life cycles. These films polish the end face of an optical connector without scratches, residues or contamination on the ferrule end face.ADS-NEXT polishing films feature stable polishing force while maintaining final finish performance and achieving an extended life-span. This series of final polishing films attains a high-performance polish with distilled water. Another feature of the ADS-NEXT series is a sharp improvement in the indentation problems that occur especially in 1.25 mm diameter ferrules from repeated use polishing. Even after many usages, ADS-NEXT can still protect against sudden occurrences of fiber indentation.ADS-MPO series is a new generation of polishing films that has been improved for MPO connector end faces to realize a finishing quality equivalent to that of single fiber polish, leaving no scratches or dirt while at the same time their stable polishing power ensures long life. These films can polish to a convex shape to eliminate dips in the core (Coredip value of “0”) which particularly affects the optical characteristics (IL/RL) of multi mode fiber. APS-MPO final polishing films also realize low return loss, comparable to single connectors, by suppressing subsurface damaged layer to a minimum. With a base thickness of 75 µm, they are available in disc and sheet types.Key Features:Ideal for Final Polish of MPO Optical Connector End FaceHigh Stability and Long Product LifetimePrevents Excessive Fiber Undercut after Repeated Use (ADS/ADS-NEXT)Multi Mode Fiber Coredip Value of “0” (ADS-MPO)Low Return Loss Comparable to Single Mode Fiber Connectors (ADS-MPO)Compatible with 1.25, 2.5 mm Diameter Zirconia Ferrules (ADS/ADS-NEXT), MPO Ferrule, All Types (ADS-MPO)Compatible with Multi Mode (OM1/2/3/4, GI50/62.5, etc.) and Single Mode (OS1/2, SM, etc.) Fiber (ADS-MPO)Disc Type (5.0 inch, 127 mm Diameter), Sheet Type (5.5 x 5.5 inch, 140 x 140 mm, ADS-MPO) and Roll Type (5.5 inch, 140 mm x 12 m, ADS/ADS-NEXT) AvailableApplications: Final Polish of Fiber Connector End Face

NEOCLEAN;Simple;Single-Core; Multi-Core;MU;LC;SC;FC;ST;MT;MPO;MTRJ