CP10G16 Aluminum Cold Plate with 4-Pass Stainless Steel tube, straight fittings

Copper fin, stub-end, 2100 W, maximum pressure 150 psi. Aavid-Boyd's (formerly Lytron's) 4000 Series™ heat exchanger is our highest performing stainless steel tubed heat exchanger. It is ideal for applications where deionized water or corrosive fluids are used, and a high efficiency, compact unit is required.

304.8 mm X 88.9 mm, 0.008 °C/W, tubed cold plate.The CP10™ 4-pass is a cost-effective, single-sided aluminum cold plate available with either copper or stainless steel tubes. It is ideal for component cooling applications where the heat load is low-to-moderate. Our range of standard tubed cold plates provide cost-effective thermal solutions for component cooling applications where the heat load is low-to-moderate. These tubed cold plates consist of copper or stainless steel tubes pressed into a channeled aluminum extrusion. This “Press-Lock” technology eliminates the need for performance-limiting epoxy between the tube and the plate, resulting in superior thermal performance. Each tubed cold plate has a single tube with no joint, ensuring leak-free operation.

Flat, Bent, Finned or Embedded; Thermal Conductivity 5,000-200,000 W/m•K; Heat Transfer Over Relatively Long Distances; Long Life; No Maintenance Noren’s unique technology and design process allow to create customized heat pipe systems with intricate bends, angles and flatness. Long life and no maintenance are added benefits of Noren’s heat pipe designs and assemblies Heat pipes can be implemented for a wide variety of applications and can be designed in any combination of bends, planes, angles and dimensions. Whether flat, bent, finned or embedded, Noren’s custom heat pipes and heat sinks are designed to optimize the thermal management capabilities of virtually any application. Heat pipes are the most common passive, capillary-driven of the two-phase systems. Two-phase heat transfer involves the liquid-vapor phase change (boiling/evaporation and condensation) of a working fluid. As the heat pipe technology industry leader, Noren products has specialized in the design and development and manufacturing of passive, two-phase heat transfer devices since 1968. Heat pipes have an extremely effective high thermal conductivity. While solid conductors such as aluminium, copper, graphite and diamond have thermal conductivities ranging from 250 W/m•K to 1,500 W/m•K, heat pipes have effective thermal conductivities that range from 5,000 W/m•K to 200,000 W/m•K. Heat pipes transfer heat from the heat source (evaporator) to the heat sink (condenser) over relatively long distances through the latent heat of vaporization of a working fluid. Heat pipes typically have 3 sections: an evaporator section (heat input/source), adiabatic (or transport) section and a condenser section (heat output/sink). To better solve your thermal removal requirements, Noren’s heat pipes offer the unique ability to achieve different bends, planes and dimensions within designs. Noren is able to create solutions with multiple angles and planes, all while maintaining the heat transfer needed for your custom application. Standard Bend Radiuses for Heat Pipes:   Round Bent Pipe Center-line Bending Radius [mm Round Bent-Flattened Pipe Center-line Bending Radius [mm] Flattened-Bent Pipe Inside Bending Radius [mm] Tube Diameter [mm] Standard Minimum Standard Minimum Standard Minimum Ø 3,18 9,53 4,78 9,53 4,78 6,35 3,18 Ø 4,75 11,13 5,54 11,13 5,54 6,35 3,18 Ø 6,35 14,30 9,53 14,30 9,53 9,53 4,75 Ø 7,92 17,48 13,49 17,48 13,49 9,53 4,75 Ø 9,53 23,83 14,27 23,83 14,27 12,70 6,35 Ø 12,70 38,10 22,23 38,10 22,23 19,05 9,53 Ø 15,88 38,10 30,18 38,10 30,18 25,40 12,70 Noren also offers and delivers custom bending solutions. Noren’s experienced engineers and production team consistently produce exceptional heat transfer in various configurations. Get in touch with the AMS Technologies thermal management experts today to discuss your customized heat pipe solution tailored to your project’s challenges. Key Features: Any Combination of Bends, Planes, Angles and Dimensions Flat, Bent, Finned or Embedded Extremely High Thermal Conductivity: 5,000 to 200,000 W/m•K Heat Transfer From Heat Source to Heat Sink Over Relatively Long Distances Long Life No Maintenance Flat, Bent, Finned or Embedded Applications: Optimize the Thermal Management Capabilities of Virtually Any Application

152.4 mm x 95.3 mm, 0.004 °C/W, tubed cold plate.Components can be mounted on both sides of CP15™, making this compact and lightweight cold plate ideal for applications where heat loads are moderating and space is at a premium. The tubes of the CP15™ cold plates are coplanar with the plate to allow for dual-sided mounting. The cold plate's tube side offers higher performance as the copper tubes are in direct contact with the component being cooled. Our range of standard tubed cold plates provide cost-effective thermal solutions for component cooling applications where the heat load is low-to-moderate. These tubed cold plates consist of copper tubes pressed into a channeled aluminum extrusion. This “Press-Lock” technology eliminates the need for performance-limiting epoxy between the tube and the plate, resulting in superior thermal performance. Each tubed cold plate has a single tube with no joint, ensuring leak-free operation.