PLD5000 Laser Diode Driver 5A PCB Mount

Only 3 available

0,5A Laser Diode Driver PCB Mount PLD500

The PLD Series Laser Diode Drivers deliver the reliability and performance you expect from a Wavelength Electronics laser driver in a compact and easy-to-integrate package. Tens of thousands of PLD drivers are deployed in particle counters, manufacturing vision systems, wavefront scanners, fiber aligners, and other laser systems around the world, proving beyond doubt the reliability and stability of the design.The PLD drivers operate from a single 5 V power supply. To accommodate high compliance lasers, or multiple stacked lasers, the PLD laser diode drivers allow the laser to be driven from a separate power supply up to 30 V.

Product number: C009004-1

Manufacturer:

€429.33*

Only 3 available

1,5A QCL Driver - QCL1500

The QCL OEM Series drivers use patented1 circuitry to produce the lowest current noise density of any commercially available QCL driver. The 500 mA QCL driver exhibits noise performance of 0.5 µA RMS to 100 kHz, and average current noise density of 1 nA / √Hz - the lowest available. In order to maintain their characteristically tight center linewidths and minimize jitter, quantum cascade lasers must be powered by drivers with exceptionally low current noise density. Our customers have reported achieving narrower linewidths with these drivers than any other they've used.Key Features Off-the-shelf models at 500 mA, 1 A, 1.5 A, 2 A Can be delivered in other current ranges up to 2 A Compliance voltage 16 V (standard), Compliance 7-20 V with factory modification Safety features protect your QCL investment Adjustable soft-clamping current limit Brown-out, reverse-voltage, & over-voltage protection Driver over-temperature protection circuit Relay shorts output when current is disabled Local and Remote Power-On and Enable control,TTL-compatible Analog modulation input between -5V and +5V.

Product number: C019337-6

Manufacturer:

€3,136.15*

1.25A Laser Diode Driver PCB Mount - PLD1250

The PLD Series Laser Diode Drivers deliver the reliability and performance you expect from a Wavelength Electronics laser driver in a compact and easy-to-integrate package. Tens of thousands of PLD drivers are deployed in particle counters, manufacturing vision systems, wavefront scanners, fiber aligners, and other laser systems around the world, proving beyond doubt the reliability and stability of the design. The PLD drivers operate from a single 5 V power supply. To accommodate high compliance lasers, or multiple stacked lasers, the PLD laser diode drivers allow the laser to be driven from a separate power supply up to 30 V. Key Features Models: 200 mA, 500 mA, 1.25 A, 5 A, and 6.5 A Operates from a 5 VDC supply Separate power supply can be used to drive high-compliance lasers up to 28 V Constant Current or Constant Power modes Safety features protect your laserAdjustable latching current limitSlow-start circuitryRelay shorts output when current is disabled Local and Remote Power-On and Enable controls Integral heatsink and fan on high current model

Product number: C019341-6

Manufacturer:

€467.67*

10A Laser Diode Driver Chassis Mount - PLD10K-CH

The PLD10K-CH is a 10 A Laser Diode Driver in a small chassis mount package. Operating from a single +5 V supply minimizes internal heat dissipation. Modular packaging makes it easy to integrate the PLD into your system. For applications that require a higher forward voltage, a separate laser diode power supply input lets you provide a higher compliance voltage.Key Features Models: 5 A, 10 A, 12.5 A 5 A and 10 A models operate from a single 5 VDC supply; 12.5 A model requires two supplies Separate power supply can be used to drive high-compliance lasers up to 28 V Constant Current or Constant Power modes Safety features protect your laserAdjustable latching current limitSlow-start circuitry Local and Remote Enable controls

Product number: C008974-6

Manufacturer:

€617.17*

10A Laser Diode Driver PCB Mount - PLD10000

The PLD10000 is powered by a 5 V supply, and the laser can be driven from the same supply. High-compliance lasers can be driven by using a separate supply up to 30 V. Key Features Two models: 10 A and 12.5 A output current PLD10000 can be operated from a 5 VDC supply Separate power supply can be used to drive high-compliance lasers, up to 27.5 V Constant Current or Constant Power modes Safety features protect your laserAdjustable latching current limitSlow-start circuitry Remote Enable controls Optimized heatsink and fan simplifi es integration

Product number: C006586-6

Manufacturer:

€617.17*

Only 1 available

12,5A Laser Diode Driver Chassis Mount PLD12,5K-CH

The PLD12.5K-CH is a 12.5 A Laser Diode Driver in a small chassis mount package. Modular packaging makes it easy to integrate the PLD into your system. For applications that require a higher forward voltage, a separate laser diode power supply input lets you provide a higher compliance voltage. One power supply is required for the internal electronics; a separate supply is required to power the laser diode.Key Features Models: 5 A, 10 A, 12.5 A 5 A and 10 A models operate from a single 5 VDC supply; 12.5 A model requires two supplies Separate power supply can be used to drive high-compliance lasers up to 28 V Constant Current or Constant Power modes Safety features protect your laser »» Adjustable latching current limit»» Slow-start circuitry Local and Remote Enable controls

Product number: C008990-6

Manufacturer:

€808.07*

Only 2 available

12,5A Laser Diode Driver PCB Mount - PLD12500

The high current PLD drivers couple the high-reliability architecture of Wavelength Electronics' lower-current PLD Series with a robust high-current output stage. Tens of thousands of PLD drivers are deployed in laser systems around the world, proving beyond doubt the reliability and stability of the design. PLD Series laser power supplies are found in fiber laser pumping, materials processing, pyrotechnic ignition, industrial welding and cutting applications, and laser diode LIV testers. It is CE certified. A PDF version of the Declaration of Conformance is available.The PLD10000 drives up to 10 A, and the PLD12500 drives up to 12.5 A. With a compliance voltage capability of 27.5 volts, these PLD drivers are ideal for driving laser bars and stacks for high-power industrial applications. Lower-current drivers are offered in the PLD Series, available in SIP PCB-mounted models at 200 mA, 500 mA, 1.25 A, 5 A, and 6.5 A output.Key Features Two models: 10 A and 12.5 A output current PLD10000 can be operated from a 5 VDC supply Separate power supply can be used to drive high-compliance lasers, up to 27.5 V Constant Current or Constant Power modes Safety features protect your laserAdjustable latching current limitSlow-start circuitry Remote Enable controls Optimized heatsink and fan simplifies integration

Product number: C006603-6

Manufacturer:

€713.00*

1A Laser Diode Driver and Temperature Controller combo - LDTC1020

The LDTC Laser Diode Driver and Temperature Controller combines Wavelength's proprietary FL500 and highly stable WTC3243 in one compact module. LDTC modules are in use around the world providing trouble-free reliability in range finders, telecom laser modules, military-aerospace research and development, airborne metrology, academic research, laser diode LIV testers, and more.Key Features Small package size Single supply operation possible LD current range 500 mA or 1 A Compatible with Type A and B lasers Slow start laser diode protection Constant Current or Constant Power modes Adjustable laser diode current limit Brownout protection Drive up to ±2.2 A of TEC current Internal or External setpoint control Failsafe setpoint default Ultra-stable PI control loop Separate Heat & Cool current limits

Product number: C008962-6

Manufacturer:

€703.42*

1A QCL Driver - QCL1000

These Low Noise QCL Drivers have the lowest current noise density of any commercially available driver. Powering your QCL with this patented driver will enable better performance - at lower cost and in less time - than otherwise possible. This is the right driver for lasers that require a high-precision and ultra-low noise current source. The 500 mA QCL laser driver exhibits noise performance of 0.5 µA RMS to 100 kHz, and an average current noise density of 1.5 nA / √Hz - the lowest available today.Key Features Off-the-shelf models at 500 mA, 1 A, 1.5 A, 2 A Can be delivered in other current ranges up to 2 A Compliance voltage 16 V (standard), Compliance 7-20 V with factory modification Safety features protect your QCL investmentAdjustable soft-clamping current limitBrown-out, reverse-voltage, & over-voltage protectionDriver over-temperature protection circuitRelay shorts output when current is disabled Local and Remote Power-On and Enable control, TTL-compatible

Product number: C008946-6

Manufacturer:

€2,976.48*

pcs

2,2A Laser Diode Driver and 2,2A Temperature Controller 2,2A combo with enclosure - LDTC 2/2 E

The LDTC 2/2 combines a 2.2 Amp laser driver and 2.2 Amp temperature controller on one small board. Available as an open frame or in a chassis mount enclosure.The WTC3243 will control temperature using thermistors, RTDs, or linear temperature sensors such as the LM335 or the AD590. Adjust temperature using the onboard trimpot or a remote voltage input from a panel mount potentiometer, DAC, or other voltage source. A default temperature setpoint configuration provides fault tolerance and avoids accidental damage to system components. Adjustable trimpots configure heat and cool current limits.The heart of the laser driver section is the WLD3343 2.2 Amp Laser Driver. It maintains precision laser diode current (Constant Current mode) or stable photodiode current (Constant Power mode) using electronics compatible with A/B Type lasers.Ideal for integrated laser driver or LED packages that include termperature control, often utilized in medical diagnostic equipment, remote sensing, analytical instrumentation, military and communications applications. Key Features LDTC2/2 Small package size Single supply operation possible Cost Effective Key Features Laser Diode Driver Default current range is 2.2 A. Custom ranges,from 3 mA up, are easily configured Slow start laser diode protection Constant Current or Constant Power modes Compatible with A or B type laser diodes Adjustable laser diode current limit Remote TTL Shutdown / Interlock Key Features Temperature Controller Drive up to 2.2 A of TEC current Set temp using D/A - includes default to 1 Volt to avoid drive when D/A is turned off or signal is lost Ultra-stable PI control loop Separate Heat & Cool current limits Single power supply operation possible

Product number: C008968-6

Manufacturer:

€667.00*

2,2A Laser Diode Driver - WLD3343

The WLD3343 is an easy-to-use analog circuit for space constrained laser diode applications. The WLD3343 maintains precision laser diode current (constant current mode) or stable photodiode current (constant power mode) regulation using electronics that are compatible with any laser diode type. Safely supply up to 3 Amps of current to your laser diode from a single +5 Volt power supply. Excellent for VCSELs, electro-optical equipment, and medical/dental systems.Key Features: Low Cost Slow Start Laser Diode Protection Drive Up to 3 Amps Output Current Constant Current or Power Operation Compatible With Any Laser Diode Type Small Package Size (1.30" X 1.26" X 0.313") Voltage Controlled Setpoint TTL Compatible Shutdown Pin Adjustable Current Limit Adjustable Current Range 2 MHz Constant Current Bandwidth Over Temperature Shutdown 14-Pin DIP PCB Mount

Product number: C006566-6

Manufacturer:

€135.24*

2,2A low noise Laser Diode Driver - WLD3343-2L

The WLD3343-2L is a general purpose laser diode driver that maintains precision laser diode current (Constant Current mode) using electronics that are compatible with any laser diode type. It is designed for lower noise operation compared to the standard WLD3343. It delays and slowly ramps the current for maximum protection. Supply up to 2.2 A of current to your laser diode from a single +5 V power source.Key Features Low Cost Slow Start Laser Diode Protection Drive Up to 3 Amps Output Current Constant Current or Power Operation Compatible With Any Laser Diode Type Small Package Size (1.30" X 1.26" X 0.313") Voltage Controlled Setpoint TTL Compatible Shutdown Pin Adjustable Current Limit Adjustable Current Range 2 MHz Constant Current Bandwidth Over Temperature Shutdown 14-Pin DIP PCB Mount

Product number: C006587-6

Manufacturer:

€201.25*

5A Laser Diode Driver PCB Mount PLD5000

Downloads

Product information "5A Laser Diode Driver PCB Mount PLD5000"