1Cure-VI-X™ Epoxy Curing Oven

Power Supply Single Phase, 1.7 kVA; Air Cooled; Integrated Viewing Cameras; Dimensions 756x505x245 mm; Weight 35 kg OpTek Systems’ LaserCleave™-1500 series are tabletop fiber processing tools for optical interconnect production. Within this series, two versions are available: LaserCleave™-1500 for single- and multi-fiber connectors LaserCleave™-1500 LT for LightTurn and MXC connectors Engineered to address the production of existing and a new generation of optical interconnects in a compact and user friendly platform, LaserCleave™ systems are designed to maximise productivity in connector manufacture. LaserCleave™ production tools from OpTek Systems are built around the technology that has been relied on in performance critical, volume production of optical fiber components since the mid 1990’s. OpTek’s unique machine tools are in service around the world producing laser-processed fiber ends of unmatched quality and reproducibility, with many millions of OpTek-processed ends in service in telecoms, datacoms, medical, aerospace and defence applications. Key Features: Interchangeable Fixture for a Wide Range of Connector Types Rapid, Non-contact Process Cuts Fiber and Epoxy Close to Pedestal Accurate and Repeatable Cut-off Length or Cleave Position Control Over Fiber End Geometry No Core-cracks, Chipping, Scratching or Hackle Minimize or Eliminate Post Cleaving Operations Reduced Overall Cost of Terminations Electrical Supply: Single Phase, 1.7 kVA Cooling: Air Cooled, Water Cooling Option Vision: Integrated Viewing Cameras Shards: Capacity Collection >1M Fiber Shards Dimensions: 756 x 505 x 245 mm Weight: 35 kg Applications: Production of Optical Interconnects; Maximise Productivity in Connector Manufacture; Production of Optical Fiber Components; Telecoms; Datacoms; Medical; Aerospace; Defence

Refractive Index 1.458-1.567; Viscosity 145-2,000 mPas; Optical Transmittance (@1 mm, 1.3 µm) 82%-94%; Bond Strength 99->247 kgf/cm²; UV Curing Conditions 10, 30 mW/cm², 5, 10 min You are looking for PLC and fiber array adhesion with high reliability? Try NTT-AT’s series of adhesives for optical waveguides! Within this series you find acrylate-based adhesives (AT6001, AT8224)with excellent durability that have cleared a large number of reliability tests. Epoxy adhesives are also part of this series, with a refractive index that can be accurately controlled within a range of 1.456 to 1.567 (±0.005, Na-D) – or with a fixed refractive index that is the same as quartz to deliver low reflectance (GA700L, GA700H). UV curing of the adhesives for optical waveguides allows for adhesion in a short time frame and makes alignment easy. The adhesives withstand a solder reflow process for Si Photonics (+260 °C). In order to achieve high reliability, a product must clear the tests conducted by the users themselves. If you have had even just a bit of dissatisfaction in reliability test results in the past, please put NTT-AT’s adhesives for optical waveguides to the test. In case you need any consulting regarding issues related to adhesion, please contact the AMS Technologies optical adhesives experts to discuss the detailed challenges of your application. Key Features: Optical Adhesive Used for PLC to Fiber Link-up Precision Refraction Index of 1.458 to 1.567 (±0.005, Na-D) Provides Controllability Ultraviolet (UV) Curing Conditions: 10, 30 mW/cm², 5, 10 min Very Little Adhesion Loss Due to Heat or Moisture, Providing High Durability Viscosity: 145 to 2,000 mPas Optical Transmittance: 82% to 94% (@1 mm Thickness, Wavelength 1.3 µm) Bond Strength: 99 to >247 kgf/cm² Applications: Gluing of Optical Waveguides; PLC to Fiber Link-up; Silicon Waveguide to Fiber Link-up