000-K0337-ONTO-52 Laser Safety Goggles

Cut off Wavelength 980, 1350 nm; Numerical Aperture 0.09 to 0.27; Core Dia. 3.5 to 14 µm; Cladding Dia. 125 µm; Background Loss <10 to <30 dB/kmGreitlex Photonics’ series of Bismuth-doped single mode (SM) optical fibers feature core diameters of 5.6 and 6.5 µm. The Bismuth-Phosphorus co-doped fiber BPDF-SM-6/125-1320 is specially designed for amplifiers, lasers or superfluorescent fiber sources operating at 1270 to 1370 nm, while the Bismuth-Germanium co-doped fiber BGDF-SM-7/125-1430 series is specially designed for amplifiers, lasers or superfluorescent fiber sources operating at 1370 to 1490nm. It replaces similar products from former FORC Photonics. Key Features: Bismuth-doped Fibers Phosphorus or Germanium Co-doped Core Diameter: 5.6, 6.5 µm Core Absorption: 0.3, 0.5 dB/m Cladding Diameter: 125 µm Cut off Wavelength: 1050, 1100 nm Core Numerical Aperture: 0.14 Typ. Peak Gain: >0.2 dB/m Applications: Amplifiers; Lasers; Superfluorescent Fiber Sources

Spectral Linewidth 10kHz; Tuning range 38-60nm; Output Power 7-17dBm; In-operation Power Adjust 7dBM-MAX; In-operation Frequency Adjust +/- 12GHz The Pure Photonics tunable laser is founded on a volume-produced micro-ITLA tailored for the Telecom industry, guaranteeing top-notch performance, quality, and reliability. A telecom-grade variant with unaltered hardware and optimized firmware is available, alongside a sensor-grade option featuring optimized hardware and firmware with customizable features. These configurations allow for tailored adjustments in output power performance (up to 17 dBm for C-band and 16 dBm for L-band) and frequency range (up to 60 nm). Additionally, each version can be further augmented with available operating features such as modulation and fast tuning. The low-noise tunable lasers are available either standalone, with an evaluation board (PPEB700), or integrated into select models such as the PPCL500 (or PPCL600), PPCL550 (or PPCL700), PPCL560 (featuring a DB-9 interface), or CoBrite enclosure. The comprehensive Pure Photonics full-band tunable laser solution boasts an exceptionally narrow linewidth (~10 kHz), markedly reduced low-frequency AM and FM noise, and a variety of operating modes within this low-noise realm. Moreover, the product facilitates access to any desired frequency set-point within the tuning range (C-band, L-band, or optionally up to 60 nm), with output power adjustable from as low as 7 dBm to as high as 18 dBm. Key features: Whispermode (PPCL600) 12 GHz Fine Tune Range (PPCL600) 30 GHz Fine Tune Range (PPCL700) Clean Sweep (PPCL700) Clean Jump (PPCL700) No-Drift mode (PPCL700) Clean Modulation (PPCL700) Clean Measurement (PPCL700) Applications: High-SNR (Signal-to-Noise-Ratio) Applications, Such as Sensing or Test and Measurement

frame: 5X7filter_code: UL-1022filter_type: Full and alignement protectionfilter_colour: Dark Greenfilter_material: Polycarbonatevlt: 0.1alignment_wl: -

Multi Mode, Step Index; 650 nm; Core Diameter 240-2,980 µm; Cladding Diameter 250-3,000 µm; Coating PE, PVC, Polyamide, PP, None; Numerical Aperture 0.46-0.58 Toray Industries' plastic optical fiber products, RAYTELA™, boast highly reliable transmission with low attenuation and excellent noise-resistant characteristics. RAYTELA is a multi mode, step index optical fiber with low loss and high reliability. Compared to optical fibers with cores made of silica or composite glass, plastic optical fibers (POF) are entirely made of polymer materials. Not only coatings and jackets, but also fiber core and cladding consist of polymers. While showing higher attenuation and lower transmission capacity, plastic optical fibers are less brittle, lightweight, more flexible, easier to handle and very cost-effective. The polymethyl methacrylate (PMMA) that makes up the core portion of the RAYTELA fiber uses a clean polymer made with integrated manufacturing from monomer through to fiber production. A special fluorine containing polymer is used for the cladding. Plastic optical fiber cords, curl cords or cables with PE, PVC, or PP jacket are also available. The cable diameter ranges between 5 and 6 mm. These lines have good resistance to heat, physical determination and chemicals. Furthermore, light guides with up to 64 fibers, bundled and jacketed for a temperature range up to +105°C are available. They are suitable for light sources of medical devices and display lighting for art objects among others. The portfolio comprises also plastic optical fiber cords for broadband communications and high NA fibers. Key Features: Multi Mode, Step Index Core Material: Polymethyl Methacrylate (PMMA) Core Diameter: 240 to 2,980 µm Cladding: Polymer Cladding Diameter: 250 to 3,000 µm Coating: PE, PVC, Polyamide, PP, None Coating Outside Diameter: 1.0 to 4.4 mm Cable Outside Diameter: 5.0, 6.0 mm Numerical Aperture (NA): 0.46 to 0.58 Attenuation at 650 nm: ≤0.15 to ≤0.30 dB/m Temperature Range: -55 to +70/+105 °C Flexible Lightweight Applications: Lighting; Decoration; Telecommunications; Short-range Data Communications; Industrial; Automotive; Medical Illumination; Endoscopes

frame: 546filter_code: UL-1002filter_type: Full protectionfilter_colour: Clearfilter_material: Polycarbonatevlt: 0.9alignment_wl: 400-780 nm