mORL-A1/mIL-A2 MAP Benchtop IL and RL Test Solutions
Product number:
SW10656
Product information "mORL-A1/mIL-A2 MAP Benchtop IL and RL Test Solutions"
2 and 4 wavelengths versions; 850 to 1625 nm; Measurement Time Averaging Options 2, 5, 10 s; Fiber Type Single Mode, Multi Mode; Connectors FC/APC, FC/PC
Viavi Solutions’ mORL-A1/mIL-A2 MAP series provides single mode insertion loss / return loss test meters and fully EF-compliant multi mode insertion loss test modules for use with Viavi Solutions’ advanced MAP-300 (and legacy MAP-200) platforms.
Viavi Solutions’ passive component/connector test solution (PCT) consists of a powerful family of modules, software and peripherals for testing insertion loss, return loss, physical length, and polarity of optical connectivity products. Leveraging the modularity and connectivity of Viavi Solutions’ MAP-300 (and legacy MAP-200) platform, the PCT can be configured for R&D, production, or qualification test environments and can address all key fiber types from single mode through OM1 and OM4.
The mORL-A1/mIL-A2 MAP series is often used in conjunction with the optical switch (mOSW-C1/mISW-C1) and remote optical power meter (mOPM-C1) MAP modules.
In mORL-A1 MAP series single mode IL and RL meters, one single-slot module contains up to four sources (1310, 1490, 1550, 1625 nm), and integrated power meter, and an optional 2x2 optical switch for automated bidirectional testing. mORL-A1 MAP series multi mode IL and RL modules are based on the same basic technology and architecture as the single mode modules described above. A standard dual-wavelength version is available (850, 1300 nm) for multi mode applications with an integrated power meter and optional 2x2 optical switches for automated bidirectional testing. The dual-fiber option can test 50 µm or 62.5 µm from the same module.
The final measurement module in the PCT family is the mIL-A2 MAP multi mode insertion loss meter which is a powerful, stable, and compact IL-only solution. One single-slot module contains two LED sources (850 nm and 1300 nm) and an integrated power meter for manual or automated testing. It is an ideal lower-cost option for applications that do not require RL measurements. Its excellent source stability and launch monitoring minimizes reference frequency requirements.
The MAP-300 (and legacy MAP-200) series is the first photonic layer lab and manufacturing platform to be LAN Extensions for Instrumentation (LXI)-compliant, bringing the full power of Ethernet connectivity and ease of use of interchangeable virtual instrument (IVI) drivers to the optical test environment. The MAP Series platform’s industry-leading density and configurability enables test engineers to meet specific application requirements in the smallest possible footprint.
Key Features:
- Increases Production Yield by a Factor of 4
- Requires Only 25% of the Space of Other Solutions
- Enables Expansion Into New High-growth, High-performance Applications such as 40/100 G Data Center Markets
- Modular Platform Can Scale as Needs Arise and Budget Allows
- Port Mapping Verifies Multifiber MPO Cassette Continuity and Polarity in Less Than 15 Seconds
- Fully Supports High-growth MPO and MTP Multifiber Connectors
Applications: Testing IL/RL/Length of Optical Connectors and Cable Assemblies, Structured Cabling Solutions and Optical Splitters; Automated Test of Multifiber Assemblies such as MPO; Solutions for Both Single Mode and Multi Mode Fiber-based Devices; Verifying Continuity and Polarity of Large Multifiber Assemblies; Measuring RL of Line Cards and Receptacle-based Transponders
Manufacturer "VIAVI Solutions"
Related links of the manufacturer
Similar products
BM Backreflection Meters
Single and Dual Source; 633-1625 nm; Reflectance Dynamic Range -1--70 dB; Fiber Type SM, MM; 8° Angled NTT-FC/APC Receptacle
OZ Optics’ BM series of backreflection meters measure the total accumulated optical return loss that is reflected back through a device or fiber under test. The measured reflections are caused by Rayleigh scattering, sudden changes in the refractive index within the device under test (DUT), or from connector ends. BM series meters are available as portable handheld devices (BM-100 and BM-200) or in a benchtop form factor (BM-1000 and BM-2000). The BM series backreflection meters are configured with an FC/APC connector on the output port, to minimize unwanted reflections. The meters have either one or two built-in laser diodes (plus a choice of SLEDs or LEDs for benchtop models) for return loss measurement at specific wavelengths. An optional detector can be added to the unit for insertion loss measurements. Reference patchcords for calibration are available.
BM series meters cover a wide range of available wavelengths, thus providing measurement capabilities for non-telecom applications as well as telecom. BM-100/200 portable meters' wavelengths range from 8050 nm to 1625 nm, while the BM-1000/2000 benchtop meters are offered with special wavelengths, ranging from 633 nm to 1625 nm.
The BM-1000/2000 benchtop backreflection meters feature a colour touchscreen display with a simple graphical user interface. The units come with a built-in memory that allows the user to store measured DUT test results.
The BM series backreflection meters can be operated remotely via the built-in USB interface. A universal AC/DC power supply is included with all units. Reference patch cords for calibration are available. Adapter patch cords are also available, to allow the meter to be used with devices having different connectors.
Key Features MB-100/200 Handheld Backreflection Meters:
Built-in Single and Dual Laser Diode Source
Built-in Single and Dual Laser Diode Source
Dual Wavelength Source Available
Sensitivity: Down to -70 dB
Wide Range of Available Wavelenghts: 850 nm to 1625 nm
Reflectance Dynamic Range: -1 dB to -70 dB
Built-in USB Communications Port
Fiber Type: Single Mode (SM), Multi Mode (MM)
Receptacle: 8" Angled NTT-FC/APC
Rugged and Compact Design
High Resolution
Optional Insertion Loss Measurement Capability
Additional Key Features MB-1000/2000 Benchtop Backreflection Meters:
Unique Wavelength Offerings for Speciality Applications
Wide Range of Available Wavelengths: 633 nm to 1625 nm
Broadband SLED for Imprived Stability
Sensitivity: Down to -75 dB
Touchscreen Display
Built-in Memory
Applications: Backreflection Measurement of Components; OCT Device Testing; Insertion Loss Measurement; End-to-end Loss Measurement; Quality Control; New Product Development; Component or System Troubleshooting; Network Installation
Product number:
SW10912
Manufacturer:
DA-100 Variable Optical Attenuators
Hand-held Device; Fiber Type SM, MM, PM (PANDA); 350 to 2050 nm; Connector Type NTT-FC/PC, ST, SC, other; Attenuation IL to 40, 60 dB
OZ Optics’ DA-100 series of compact, hand-held and rugged digital attenuators feature high resolution, high speed, high attenuation range and high power handling (blocking technique only). These CE approved attenuators have low insertion loss, low backreflection, low PDL and flat wavelength response. The DA-100 series of hand-held digital attenuators can be calibrated for up to four wavelengths, for C or L bands. Alternatively, the units can be calibrated for a continuous range. By using interpolation between the calibration wavelengths, the units are capable of providing accurate attenuation levels over a continuous, broad range of wavelengths. A computer interface allows users to access or remotely control the units through a PC. An optional, built-in rechargeable battery is available for field use, where AC power may not be readily accessible.
OZ Optics provides digital attenuators that use either single mode, multi mode or polarization maintaining (PM) fiber. In general, OZ Optics uses polarization maintaining fibers based on the PANDA fiber structure when building polarization maintaining components and patchcords. However, OZ Optics can construct devices using other PM fiber structures. OZ Optics does carry some alternative fiber types in stock, so please contact AMS Technology for availability. If necessary, OZ Optics is willing to use customer supplied fibers to build devices.
Key Features:
CE Compliant, Hand-held Device
Computer Interface (USB as Standard)
Battery Option Available
High Power Handling (up to 2 W)
High Speed and Resolution- Wide Attenuation Range (from 350 to 2050 nm)
Low PDL and Wavelength Dependency
Low Insertion Loss and Backreflection
Rugged and Compact Design
Calibrated for Dual Wavelengths, (1300 to 1550 nm) or Calibrated for C and L Bands. Can also be Calibrated for up to Four Individual WavelengthsApplications: Bit Error Rate Testing; Trouble Shooting Receivers and Other Active Fiber Optic Components; Simulating Long Distance Fiber Transmission; Design of Fiber Optic Transmitter/Receiver Circuitry; Power Meter Linearity Checks; Power Setting
Product number:
SW10496
Manufacturer:
DR-100 Digital Variable Reflectors
980 to 1625 nm; Reflectance Range 2 to 60 dB; Fiber Type SM, MM, PM; PDL 0.05, 0.08 dB; Optical Max. Power Level Continuous 500 mW (MM), 50 mW (SM)
OZ Optics’ DR-100 series of digital variable reflectors enables the user to generate a known level of return loss to evaluate system response. The unit allows testing the return loss sensitivity of devices such as laser diodes, transmitters, isolators and so on. By generating a precise reflection level, system performance (bit error rate, noise levels, isolator performance) can be evaluated. A built-in calibration table accurately defines intermediate degrees of reflection from 2 dB to as high as 60 dB for different wavelengths. DR-100 digital variable reflectors are offered using either single mode (SM), multi mode (MM), or polarization maintaining (PM) fibers. In general, OZ Optics uses polarization maintaining fibers based on the PANDA fiber structure when building polarization maintaining components and patch cords. However OZ Optics can construct devices using other PM fiber structures. OZ Optics also carries some alternative fiber types in stock, please contact AMS Technologies for availability. If necessary, OZ Optics is willing to use customer supplied fibers to build devices. For best results, the standard versions of the DR-100 series are designed to accept angled FC/PC connectors. Other connector types are possible with lower dynamic reflectance range. DR-100 digital variable reflectors can be controlled remotely via a USB interface. A universal AC/DC power supply is included with all units. The DR-100 digital variable reflectors can also be provided with a custom built-in fused coupler which directs a fraction of the reflected light to a second optical connector on the unit. The user can use this signal for monitoring the reflected power or determining the influence of reflected power on his device under test. For details, please contact AMS Technologies. Key Features:
High Speed
Wide Reflectance Range: 2 to 60 dB
Low Insertion Loss
High Resolution
Rugged and Compact Design
Wide Wavelength Range: 980 to 1625 nm
Can Be Calibrated for Dual Wavelengths
Wide Range of Connectors
Polarization Insensitive
USB Communications Interface
Applications: Bit Error Rate Testing; Troubleshooting Receivers and Other Active Fiber Optic Components; Design of Fiber Optic Transmitter/Receiver Circuitry
Product number:
SW10868
Manufacturer:
EOTS-100 Multi-Channel Optical Test System
No. of Channels 12, 24; 1310, 1550, 1625 nm; Source Type SLED; Output Power Level >-6 dBm; IL Repeatability ±0.025 dB; IL Dynamic Range 50 dB; Fiber Type SMF-28; Connector Type Ultra FC/PC, FC/APC, SC, SCA, LC, MU
OZ Optics has developed an environmental multi-channel optical test system allowing fast, simple and flexible long-term reliability testing. The system integrates an optimized optoelectronic design (including sources, optical switches, and photodetectors) and robust system management software.
The EOTS-100 system allows optical manufacturers to perform automated and flexible long-term testing for compliance with industry standards such as Telcordia generic requirements (GR-326-CORE, GR-1209-CORE and GR-1221-CORE). The meter offers the capability of characterizing very low insertion loss (IL) drift. It also offers the optional capability of measuring return loss and polarization dependent loss variations. Measurement capability using tunable sources can also be offered
The system can be run through any computer operating Windows™. The management software has a built-in database for data processing and statistical analysis of multiple sets of measurements. Collected data can be graphically displayed for easy interpretation. Remote configuration and operation of the unit is possible with the unit via a parallel printer port, a standard serial communication port (RS232) or General Purpose Interface Bus (GPIB).
Key Features:
Long-period Testing Capability for Optical Passive Component Reliability
Multiple Wavelength Configurations
Multiple Channel Configurations
Optional Swept Wavelength Capability
Flexible and Simple User Interface
Statistical Measurement Analysis
Custom Configuration Designs Available
Optional Optical Return Loss (ORL) Capability
Optional Polarization Dependent Loss (PDL) Measurement Capability
Wavelength: 1310 nm, 1550 nm or 1625 nm
Source Type: SLED
Output Power Level: >-6 dBm
Number of Channels: 12 or 24
Insertion Loss (IL) Repeatability: ±0.025 dB
Insertion Loss (IL) Dynamic Range: 50 dB
Optical Return Loss (ORL) Accuracy: ±0.5 dB up to 55 dB, ±1 dB from 55 dB to 60 dB (for FC/APC on DUT)
Polarization Dependent Loss (PDL) Accuracy: ±(0.01 dB + 5% of PDL)
PDL Dynamic Range: 0.025 dB up to 10 dB
Fiber Type: SMF-28 (9/125/900 μm) Single Mode (SM) Fiber
Input/Output Connector Type: Ultra FC/PC, FC/APC, SC, SCA, LC, or MU
Display Resolution: 0.01 or 0.001 dB
Switch Life Time: Over 10 Mio. Cycles
Adjacent Channel Switching Time: 10 ms
Host Computer Operating System: Windows 2000, Me, XP, 98.
Min. Computer Requirements: 300 MHz or faster Pentium III Computer, 128 MB of RAM, External Control Parallel Printer Port, RS-232 or GPIB
Input Voltage: 100 VAC to 240 VAC / 50 Hz to 60 Hz
Operating Temperature: 0°C to +50°C
Dimensions (Without External Computer : 17.6 x 48 x 36 cm (19 Inch Rack Mountable)
Weight: <10 kg
Applications: DWDM Channel Testing; Long-term Reliability Testing on Optical Passive Components; Characterization of Insertion Loss (IL) Versus Wavelength Dependence; Optical Return Loss (RL) Measurement; Characterization of PDL Dependence Versus Wavelength; Product Qualification as per Telcordia; Quality Control
Product number:
SW11960
Manufacturer:
ER-100 Polarization Extinction Ratio Meters
Handheld Type; 400 to 2400 nm; Extinction Ratio Range 30, 35, 40 dB; Extinction Ratio Accuracy ±1 dB; Angular Accuracy ±0.5°; Adapter Type FC/PC, ST, E2000, SC, LC, MU, Universal 1.25/2.5 mm
OZ Optics’ ER-100 series of polarization extinction ratio meters allows one to quickly measure the output extinction ratio of light from a fiber. A rotating polarizer measures the extinction ratio and the orientation of the transmission axis with respect to the key on the connector. As an option, neutral density filters can be added to the ER-100 extinction ratio meters to extend the maximum power range. These filters can be easily inserted and removed without disturbing your setup and allow power levels up to 2 W to be measured. The ER-100 meters operate in several modes. In real time mode, the meter gives the extinction ratio and alignment. In logging mode, the meter gives the worst-case extinction ratio over a given time span. This mode is ideal for QA measurements. In addition, the meter can provide a relative power readout, proportional to the input power in dB. This readout is updated at up to 650 times per second. The computer interface allows the unit to be used with computer control units, for alignment purposes. The combination of polarization and relative power functions allows the unit to be used for complete auto-alignment of polarization maintaining components. Key Features:
Measures Extinction Ratio up to 40 dB (Over Specific Wavelength Ranges)
Built-in USB Communications Interface
Wide Wavelength Range: 400 to 1000 nm for Visible; 850 to 1650 nm and 1800 to 2400 nm for IR
0.01 dB Resolution in ER and 0.3° Resolution in Angle
1dB Accuracy in ER, 0.5° Accuracy in Angle
Measures up to 2 W CW Input Power
Rugged and Compact Design
Logging Mode for Continuous Measurement
Interchangeable Connector Adaptors
Applications: Fiber Optic Component Manufacturing; Automated Alignment; Quality Control and Measurement; Product Development; Component or System Troubleshooting
Product number:
SW10908
Manufacturer:
ER-1000 Polarization Extinction Ratio Meters
Benchtop Type; 450 to 2400 nm; Extinction Ratio Range 30, 35, 40 dB; Extinction Ratio Accuracy ±0.15, ±0.5 dB; Angular Accuracy ±0.5°; Adapter Type FC/PC, ST, E2000, SC, LC, MU, Universal 1.25/2.5 mm
OZ Optics’ ER-1000 series of benchtop polarization extinction ratio meters allows one to quickly measure the output extinction ratio of light from a fiber. A rotating polarizer measures the extinction ratio (ER) and the orientation of the transmission axis with respect to the key on the connector. As an option, neutral density filters can be added to the ER-1000 extinction ratio meters to extend the maximum power range. These filters can be easily inserted and removed, without disturbing your setup and allow power levels up to 2 W to be measured. The ER-1000 meters operate in several modes. In real time mode, the meter gives the extinction ratio and alignment. In logging mode, the meter gives the worst-case extinction ratio over a given time span. This mode is ideal for QA measurements. In addition, the meter can provide a relative power readout, proportional to the input power in dB. This readout is updated at up to 650 times per second. The computer interface allows the unit to be used with computer control units, for alignment purposes. The combination of polarization and relative power functions allows the unit to be used for complete auto-alignment of polarization maintaining components. Key Features:
Measures Extinction Ratio up to 50 dB (Over Specific Wavelength Ranges)
Very Wide Wavelength Range: 450 to 900 nm for Visible; 850 to 1650 nm or 1800 to 2400 nm for IR
±0.15 dB ER Accuracy up to 30 dB, ±0.5° Accuracy in Angle
0.01 dB Resolution in ER and 0.3° Resolution in Angle
Power Measurement up to 2 W
Interchangeable Connector Adaptors
Logging Mode for Continuous Measurement
USB Communications Interface
Touch Screen Display
Built-in Memory for Store and Recall Functions
Applications: Fiber Optic Component Manufacturing and Testing; PMC and PBS PER and Coupling Ratio Testing; PM Fiber Laser Diode Pigtailing; PM Fiber Patch Cord Production and Testing; PM Fiber Fusion Splice Testing; Automatic Alignment; Quality Control and Measurement; Product Development; Component and System Troubleshooting
Product number:
SW10909
Manufacturer:
FOFF-100 Fiber Optic Fault Finder
1310, 1550 nm; Sampling Resolution 2.5 m; Dead Zone 10, 40 m; Max. Measurement Distance 25, 60 km; Fiber Type 9/125 µm SM, Other
OZ Optics’ FOFF Fiber Optic Fault Finder is a cost effective, easy-to-use, OTDR-type device that provides continuous monitoring of fiber optic network health. The device detects and pinpoints bad connections, fiber bends, broken fibers and other problems that can lead to reduced network performance or service failure. The fiber optic fault finder combines powerful fault detection and communications capabilities in a compact package. Remote access capability allows secure monitoring of network operating conditions using a computer from virtually anywhere.
The OZ FOFF fiber optic fault finder can be bundled with an optional software package capable of gathering raw fault location data, transforming that data into actionable information, and serving it up via text message, email, instant message, and the web. Escalating alarms, starting with the field engineer, and rising to any level specified by the network operator, are a standard feature of the software. The software is available as a hosted web service or for integration into customer NOCs.
The device enables fiber optic network operators to increase field engineer efficiency, improve network and service availability and achieve a higher overall return on investment (ROI) from fiber optic networks. Networks suitable for monitoring by the FOFF fiber optic fault finder include FTTX access networks, backbone and metro transport networks, enterprise fiber networks, and multi-service operator (MSO) networks including hybrid fiber/coax (HFC) networks.
Key Features:
Compact System
Monitors and Reports Network Health Status in Real Time 24 h/day, 365 days/year
Reduces Revenue Loss Due to Damaged Fiber
Reports Fault Location With Time Stamp
Escalates Faults to Tiered Operational Support System
Lowers Network Operating and Maintenance Expenses
Improves Network and Services Availability
User Friendly Interface Via USB, RS-232, or Ethernet
Cellular Phone, Email, IM, SMS, Text Message for Outages or Early Alert Reporting
Wavelength: 1310 nm or 1550 nm, Other Wavelengths Also Available
Fiber Type: 9/125 µm Single Mode (SM), Other Fiber Types Also Available
Optical Connector: FC/APC, Other Connector Types Available
Dead Zone: 10 m to a Reflective Event, 40 m to a Non-reflective Event; Smaller Dead Zones Also Available
Sampling Resolution: 2.5 m, Better Resolutions Also Available
Distance Accuracy: 5 m + (3x10-5 x Distance) – Does not Include Errors From Index of Refraction
Maximum Measurement Distance (Using a 50 ns Pulse): 60 km (Reflective Event), 25 km (Non-reflective Event) – Longer Distances Also Available
Power Supply: 12 VDC to 15 VDC, 500 mA (Max.)
Applications: Network Fiber Infrastructure Health Monitoring and Fault Reporting; Backbone and Metro Transport Network Monitoring; FTTX Access Network Monitoring; MSO HFC Networks; Enterprise, Private, Campus Fiber Network Monitoring; Mission Critical Fiber Link Monitoring; Performance Monitoring Subsystem for Protection Switch or Route Diversity; Field Technician Test and Troubleshooting Tool for Access or Building Network; Real Time Inline Test and Measurement; Fiber Network Long-term Performance Data Collection and Analysis
Product number:
SW11914
Manufacturer:
KI 23400 & KI 27400 Handheld Two-Way Loss/Length/ORL Test Set
635-1650 nm; Loss Range 21.5-44 dB; Loss Repeatability/Linearity 0.04, 0.06 dB; Power Accuracy 1%
Kingfisher’s KI 23400 & KI 27400 is an optical, handheld, two-way loss test set (OLTS) with length and ORL measurement that is perfect for ultra-high fiber count tier 1 loss & length testing applications. A pair of these compact instruments set new standards of productivity, accuracy and ease of use.
Each fiber needs just one test hook-up and one key press for a complete bidirectional loss, length and ORL test, for both single mode (SM) and multi mode (MM) fiber, so the same test method can be used for all fibers in a network, eliminating administration, training and test errors.
Testing is accurate and can take only five seconds, direct onto a final report. The “Visitester” option lights up the far end of the fiber to be tested.
A pair of KI 23400 & KI 27400 instruments both display length as well as bi-directional loss and ORL each end, in one hook-up, in real time, with no need to specify master/slave instruments. A single instrument can also be used as a stand-alone light source & power meter, ORL meter, VFL, or tone generator/detector.
Key Features:
Ease to Use, Slim & Versatile
Loss, Length & ORL Tester for High Fiber Counts
25% of the Size/Weight, 7x the Battery Life of Competitors
Alkaline Battery Life: 80 h
USB External Power
EF Compliant Multi Mode Sources
Single Mode (SM), Multi Mode (MM), Quad & Other Wavelengths
Wavelength Range 635 to 1650 nm
Loss Range: 21.5 to 44 dB
Loss Repeatability / Linearity: 0.04, 0.06 dB
Bidirectional Autotest Loss, ORL & Length Testing on One Fiber
Real-time Pass/Fail Display
Interchangeable Connectors
8,000 Fiber Memory and USB Interface
KITS™ Reporting Software
Autotest Power Meter
Power Accuracy: 1%
24 Calibrated Wavelengths
Continuity Test Tone With Multi-Fiber ID
VFL VisiTester Option
ISO 17025 Traceable
Full QA & Test Reports for Source Stability / λ, & Power Meter Linearity
Dimensions: 190 x 105 x 35 mm
Weight: 420 g
3 Year Warranty and Calibration Cycle
Applications: Single Mode (SM), Multi Mode (MM) & Both Fiber Types; Tier 1 Cable Certification & Reporting; Bidirectional Loss, Length & ORL in One Hook-up With Integrated VFL (VisiTester); Optical Power, Continuity & Polarity
Product number:
SW11516
Manufacturer:
KI 6171 Optical Fiber Identifier
Fiber Type SM; Wavelength Detection 800-1700 nm; Test Tones 0.27, 1, 2 kHz; IL 0.8, 2.5 dB; Power Detection Range -50-+10 dBm
Kingfisher’s KI 6171 tone and traffic identifier is a rugged, easy to use instrument used to identify optical test tones, live traffic and optical power levels in single mode (SM) fiber.
KI 6171 optical fiber identifiers are commonly used during installation and maintenance of fiber optic systems to positively identify fibers to avoid accidently disconnecting live systems, and for general checking of continuity, faults or mid-span loss points.
The KI 6171 optical fiber identifier is easy and reliable to use with one hand. It can detect a variety of optical tones, which can be provided by any Kingfisher laser source. When traffic is present, an audible tone can be heard as well as LED indication of traffic direction and estimated core power.
Various field interchangeable chucks are supplied and enable rapid re-configuration for a variety of fiber cord diameters. Chucks not in used are securely stored and conveniently carried along with the equipment in the slide-on compartment hence reducing chances of those chucks being misplaced.
The approximate core power in the fiber is measured and displayed on a two-digit display. Its very long distance operating range of up to 200 km makes the KI 6171 optical fiber identifier suitable for use where a VFL cannot reach.
Key Features:
Single-handed Operation
Very Easy to Operate
Thumb Lock for Consistency & Hands-free Operation
Wavelength Detection: 800 to 1700 nm
Identifies and Displays Dominant Traffic Direction With Audible Alert
Identifies 3 Common Test Tones: 270 Hz, 1 kHz, 2 kHz
Low False Detection
Low Insertion Loss (Typical): 0.8 dB (1310 nm), 2.5 dB (1550 nm)
Approximate Fiber Power Meter Display
Power Detection Range: -50 to +10 dBm (CW in 0.9 mm Bare Fiber)
Supplied With 4 Easy-change Heads for Ribbon / 250 μm Coated Fiber, 900 μm Fiber, 2 mm & 3 mm Patch Lead
Slide-on Compartment for Chuck Storage
Fiber Slack: 12 mm
Uses 2 x AAA Alkaline Batteries
Auto On/Off
Durable Metal Housing and Quality Construction
Dimensions: 196 x 30.5 x 27 mm
Weight: 200 g
1-year Warranty
Full QA Report
Applications: Positive Identification of Fibers Carrying Traffic or a Test Tone; Approximate Indication
Product number:
SW11520
Manufacturer:
KI 7010 Series Variable Optical Attenuators
Digital Variable Handheld Attenuator; Fiber Type SM, MM, POF; 650-1550 nm; Attenuation Range 2.0-60 dB; Resolution 0.05 dB; RL 60 dB
Kingfisher’s KI 7010 Series of handheld fiber optic variable attenuators are precision instruments commonly used for testing optical system margin, linearity and sensitivity of optical transmission equipment and to adjust a source output power.
Superior specifications, superb accuracy, high productivity and numerous useful attributes like remote-control capability make the KI 7010 Series genuine laboratory grade instruments. Versions are available for single mode (SM), multi mode (MM) and POF fiber types.
Very flat wavelength response enables confident testing of CWDM/DWDM systems. The instrument wavelength setting is actually irrelevant in most situations up to about 20 dB of attenuation.
Industry leading linearity and absolute accuracy backed up by an ILAC / ISO 17025 traceable calibration certificate enable precision linearity testing of sub systems and components. Full absolute calibration is performed at all wavelengths and attenuation values.
The patented metal-free interchangeable connectors avoid critical contamination of connectors used in high power applications. Operational modes include manual, relative, step and remote control via a PC. Step mode is very useful for typical linearity checking applications.
The free Labwindows-based PC software is used to provide external control. External control is provided via an RS232 interface. Alternatively, a simple command set can be used to program the instrument using your own code.
The attenuation remains stable as the instrument is turned on or off, making the device suitable for embedded use in working systems. Power can be supplied externally.
Key Features:
Compact, Rugged & Light Weight
Single Mode (SM), Multi Mode (MM) & POF Versions
Easy to Use, Accurate & Productive Instruments
Excellent Linearity and Absolute Loss Accuracy
Wavelength Range: 650 to 1550 nm
Up to 2 Calibrated Wavelengths
Attenuation Range: 2.0 to 60 dB
Resolution: 0.05 dB
Optical Return Loss (RL): 60 dB
Polarization Dependent Loss (PDL): <0.1 dB
Polarization Mode Dispersion (PMD): <1 ps
ISO 17025 Traceable Calibration Certificate
High Optical Power Handling Capability: up to >+30 dBm / 1,000 mW
Broadband, Flat Wavelength Response
Low Minimum Insertion Loss
Supplied With Metal-free SC, ST, LC Interchangeable Connectors
Multiple User-defined Sequences
Remote-control (Labwindows) Software
Set Attenuation is Unaffected by Power On/Off Status
Very Long Battery Life & External Power
3 Years Warranty
Applications: Testing Optical Transmission Equipment, Field, Handheld, Bench, Embedded; Optical Margin Testing; Sensitivity Testing; Linearity Testing; Source Output Power Adjustment; Temporary Passive Adjustable Transmission Pad
Product number:
SW11519
Manufacturer:
KONCENTRIK-V2 CONNECTOR Concentricity Measurement System
Eccentricity Range 0 to 100 µm; Index Measurement 0° to 360°; Measurement Speed 10 s; Magnification x400; Ferrule Outside Diameter 1.00 to 3.17 mm
Data-Pixel’s KONZENTRIK-V2 is a modular measurement system. Fiber or ferrule eccentricity measurements can be performed using different mechanical modules.
KONZENTRIK-V2 CONNECTOR is dedicated to concentricity measurement of fiber core relative to ferrule envelope. The unit is able to measure the concentricity and indicate the angular value of maximum eccentricity.
With the BLINK software platform, KONZENTRIK-V2 CONNECTOR is an easy to use measurement unit with database connectivity.
KONZENTRIK-V2 CONNECTOR systems are compatible with Data-Pixel’s SUPERVISOR software, a MES style software which is in charge of the execution, management and monitoring of the production in an assembly workshop for fiber optic connectors. Its role is to supervise machines and help operators with complete traceability of the manufacturing information.
Key Features:
Measures Diameter 2.50 and 1.25 mm PC Type Connectors
APC Connectors Option Available
Ferrule End-face Visual Inspection at x400 Magnification
Accurate and Repeatable Measurements
User Adjustable Quality Level for High-speed Measurements
Easy Calibration BLINK Concentricity Software
Measurement Data Exported in Standard CSV Format
Statistics on Measurements Available
Measurement Report in HTML Format
Compatible With Desktop PC, Laptop, Tablet PC
Applications: Measurement of Connector Eccentricity; Concentricity Measurement of Fiber Core Relative to Ferrule Envelope; Indicate Angular Value of Maximum Eccentricity
Product number:
SW10896
Manufacturer:
KONCENTRIK-V2 FERRULE Concentricity Measurement System
Eccentricity Range 0 to 100 µm; Index Measurement 0° to 360°; Measurement Speed 3 s; Magnification x400; Ferrule Outside Diameter 1.00 to 3.17 mm
Data-Pixel’s KONZENTRIK-V2 is a modular measurement system. Fiber or ferrule eccentricity measurements can be performed using different mechanical modules.
KONZENTRIK-V2 FERRULE is dedicated to concentricity measurement of ferrule bore to ferrule envelope. The software indicates the maximum eccentricity angle when rotating the ferrule.
With the BLINK software platform, KONZENTRIK-V2 FERRULE is an easy to use measurement unit with database connectivity.
KONZENTRIK-V2 FERRULE systems are compatible with Data-Pixel’s SUPERVISOR software, a MES style software which is in charge of the execution, management and monitoring of the production in an assembly workshop for fiber optic connectors. Its role is to supervise machines and help operators with complete traceability of the manufacturing information.
Key Features:
Measures Ceramic and Metal PC-type Ferrule
Automatic Measurement and Re-positioning of Ferrule at Tuned Position
Ferrule End-face Visual Inspection at x400 Magnification
Ferrule Envelope on Bare Ferrules & Bore Shape-error Measurement
User Adjustable Quality Level for High-speed Measurements
Easy Calibration BLINK Concentricity Software
Measurement Data Exported in Standard CSV Format
Statistics on Measurements Available
Measurement Report in HTML Format
Compatible With Desktop PC, Laptop, Tablet PC
Applications: Measurement of Ferrule Eccentricity; Concentricity Measurement of Ferrule Bore to Ferrule Envelope
Product number:
SW10895
Manufacturer: