UBAR™ UV LED Flood Curing Systems

No. of Connectors 24-36; Resolution 0.1 °C; Accuracy ±2 °C; Max. Temperature +155 °C; Stability ±2 °C; Horizontal Curing 0°, +15°, -15°; Step-Cure Capability Connected Fibers’ patented 1Cure is the industry’s first intelligent expoxy curing oven for both horizontal and vertical curing applications. The 1Cure oven features both soak and ramp temperature profile curing capability, a 4” full-color LCD touchscreen as well as network connectivity with remote programmability and access The system stores up to 999 programs. The temperature of the actual connector fixture is monitored and controlled rather than the traditional method of monitoring the hot plate. This eliminates the temperature error created by the thermal offset between these two surfaces in a typical curing oven. 1Cure is also available with an optional advanced cooling system for reducing cycle times between ramp (step) cure profiles. The ramp cure technology eliminates fiber cracking especially on larger core fibers by utilizing ramp and soak cycles. This significant advancement is useful for large-core and multi-fiber applications. It also allows to standardize on one epoxy for various applications by customizing time and temperature profiles. The oven features a horizontal curing base with a removable 24 position fixture for MT (MPO) and a convertible lid providing cable access to a block to accommodate up to 96 single fiber termini (72 for the 1Cure-200) to cure in a vertical position. The internal 15° tilt mechanism for the horizontal cure will allow for 0° or 15° curing angle to prevent fibers from retreating during bare, buffered or ribbon fiber applications. The 1Cure is designed by Connected Fibers to meet all industry performance and safety standards providing leading technology for the heat curing process of fiber optic termini. The oven is suited for all production environments and for all industry standard connectors and ferrules with use of heat-cure epoxies, including MT (MPO) connectors. Key Features: Step-Cure Capable Cooling System Between Cycles (Optional) MT or Single-Fiber Curing Flat to Angled Internal Tilt for Horizontal Curing Precision Temperature Control Integrated Thermocouple in Fixture for Ideal Calibration Networkable for Remote Monitoring and Programming of Oven Touchscreen Interface Up to 999 Programmable Cure Schedules for Various Fiber Types Ramp Curing to Eliminate Fiber Cracking Especially in Multi-fiber or Large-core Fibers Standardize on One Epoxy Temperature Range (Hot Plate Temperature): Ambient +5 °C to +155 °C Temperature Display Resolution: 4 Digit / 0.1 °C Temperature Uniformity: ±2 °C Temperature Accuracy: ±2 °C Horizontal Curing: 0°/+15°/-15° Vertical Curing Capacity: 3 Blocks Horizontal Curing Capacity: 24 MT Ferrule, 36 LC Applications: Cable Assembly Fabrication; Medical; Military; Specialized

No. of Connectors 48; Resolution 0.1°C; Accuracy ±2°C; Max. Temperature +155°C; Uniformity ±2°C; Number of Profiles >99, Number of Steps Per Profile 9; Number of Timers 4 The 1Cure-VI-X™ employs cutting-edge PID microprocessor technology paired with an intuitive, programmable interface. This innovative design ensures a fiber optic curing oven with remarkably stable and uniform temperatures across all heating blocks. With a temperature stability of +/- 0.2°C, the 1Cure-VIX grants precise control over your curing process. Its ramp/soak feature is particularly advantageous for step curing, catering to large core fiber applications and military curing profiles. Constructed with quality materials and insulation, this oven boasts longevity for both the appliance and its electrical components. Its superior craftsmanship and functionality guarantee a controlled process and a wise long-term investment in your curing operations.With the introduction of curing cassettes, you can now efficiently cure the latest VSFF duplex connectors available in the market. Furthermore, the oven is C.E. Certified for sale within the European Union. Key Features: Vertical Curing Blocks for Multiple Applications Including LC, LC Duplex Uniboot, SC, FC, MU, ST, SMA and various Mil/Aero Termini. Curing Cassettes and Block Available for Non-Crimped Termini and the latest High Density Duplex Connectors Patented In-Fixture temperature monitoring for precision temperature control Up to 48 connector capacity for simplex connectors. Temp Range: Ambient +5 to 155°C Temp Uniformity: +/- 2°C Temp Accuracy: +/- 2°C Temp Display Resolution: 0.1°C Number of Profiles: >99 Number of Steps Per Profile: >9 Number of Timers: 4 Electrical Power: 100-120V or 220-240V (150W) Dimensions: 12" x 8" x 4.5" Weight: 9.5lbs (4.3Kgs) Applications: Large Core Fiber Applications; Military

No. of Connectors 24-60; Resolution 0.25 °C; Accuracy ±2, ±2.5 °C; Max. Temperature +150 °C; Stability ±0.75 °C; Heating Speed 12 °C/min; Dimensions 343x127x236 mm Nanometer Technologies’ Smart Oven models are smart epoxy fiber optic curing ovens. These ovens are specifically designed to work with MT style connectors, but also work great with many other styles of connectors. The front-load model’s horizontal positioned heating block will hold 24 MT style connectors and gives users the ability to cure custom style connectors with ease. A top load version of the Smart Oven cures up to 60 connectors at a time (standard 32 connectors) at super-stable temperatures. The 4.3-inch touch screen PID process controller enables repeatable performance with accurate temperature control, the ability to store up to 30 recipes (temperature profiles and epoxy types) and ramp/soak function for Mil spec. applications. With the built-in alarm system, you'll avoid over-curing your connectors. Key Features: Resolution: 0.25 °C Accuracy: ±2.5 °C @ 150 °C, ±2 °C @ 25 to 120 °C (Thermocouple Accuracy) Maximum Temperature: +150 °C Stability (Lid Closed): ±0.75 °C Heating Speed: 12 °C/min Cooling Speed: 1.5 °C/min Settling Time: 3 min Capacity: 24 to 60 Connectors (Variable Depends on Heater Block) Dimensions: 343 x 127 x 236 mm Weight: 2.3 kg Ramp/Soak Specs: 10 Steps per Profile, Program Time & Temperatures, Save up to 25 Profiles, Save Names per Profile, Linear Ramping to Temperature, Overshoot ±5%,. +160 °C Thermal Shutdown Protection No. of Pre-set Oven Profiles: 13 Applications: Curing of Epoxy Adhesives for Fiber Optic Connectors

Homogeneous & Powerful; Irradiance ≤250/≤1000 mW/cm²; Wavelength 275-465 nm; Power Supply 48 VDC, 400 W; Active Air Cooling With Fans, Water Cooling Optional The UCUBE™ series of homogeneous & powerful UV LED flood curing lamps has been designed by UWAVE for repeatable and large irradiation area processes. Its great homogeneity associated to a consistent illumination makes this series of UV LED flood curing systems suitable for a wide range of applications such as curing, bonding, photolithography or photoaging. Available wavelengths include 275 nm, 305 nm, 365 nm, 385 nm, 395 nm, 405 nm and 465 nm. Beyond the UV-A wavelength range, UWAVE has developed a UV-C version of the UCUBE™ to meet actual concerns on contamination and spread of virus and bacteria. Equipped with the best 275 nm LED in the market, this UCUBE™ model allows a quick & efficient disinfection process of objects and surfaces for larger areas. Any other wavelength (UV-C, UV-B, Visible and IR) is available upon request, please contact AMS Technologies for further details. Depending on total number of UV LEDs, two different power versions of UCUBE™ are available to be suitable for all curing processes that require UV energy: 25 LEDs for a maximum irradiance level of 250 mW/cm², or 100 LEDs for a maximum irradiance level of 1,000 mW/cm². The standard UCUBE™ system features dispersive UV illumination, but an optional collimated beam optics can be integrated to keep at least 75% of the global irradiance at 10cm working distance – allowing the user to benefit from a powerful and homogeneous UV flux at higher working distances by minimizing UV ray dispersion and loss. UCUBE™ systems can also be delivered as water-cooled variants thanks to a dedicated external chiller system. Water flow allows a better thermal management of the LED to get an optimal optical stability and a longer lifetime for the product. Please contact AMS Technologies for further details. For powering and controlling the UCUBE™ systems, UWAVE provides different types of UPOWER™ UV LED power supply & control units for different requirements. UWAVE has designed its products to fit OEM and system integrator requirements. Thus, it is possible to control UCUBE™ systems directly from the PLC (Programmable Logic Control) to facilitate integration into production lines. Many options are available such as temperature monitoring or the control of UV irradiance and time of exposure. In industrial environments, noise reduction is a growing issue. UWAVE developed the SMART BLADE™ technology to control fan speed in real time based on data provided by the UV LED source and thus minimize the noise. By optimizing its own temperature control, UCUBE™ sources are guaranteed to be both stable and durable. The UCUBE™ LED has a much higher output power stability than other technologies and does not emit infrared radiation, thus heat-sensitive materials can be processed. UV LEDs are eco-friendly as they do not create ozone, do not contain mercury and only need a few watts to operate. Key Features: 100 mm x 100 mm UV-emitting Window Two Power Versions: 25 LEDs (250 mW/cm²) or 100 LEDs (1,000 mW/cm²)to Meet Various Application Requirements Dispersive or Collimated Beam Homogeneity up to 90% Easy to integrate on the UV CHAMBER™ for Safe and Repeatable Processes Max. Irradiance: Up to 250/1,000 mW/cm² Wavelength: 275, 305, 365, 385, 395, 405 or 465 nm Power Supply: 48 VDC, 400 W Cooling System: Active Air Cooling With Fans, Water Cooling Option Available Body Material: Aluminium Alloy Dimensions: 100 mm x 100 mm x 180 mm Weight: 2.0 kg Applications: High-power UV Curing Processes; Curing of Optical Adhesives, Glues, Resins, Varnishes, etc.; UV Curing of Glues in the Cosmetics Industry for Assembling on Perfume Bottles; Assembling and Curing Processes in the High-tech Industry; UV Curing of Resins and Coatings in the Electronics Industry for Manufacturing and Finishing Processes

Compact & Lightweight; Irradiance ≤1,200 mW/cm²; Wavelength 365, 385, 395, 405 nm; 4 Interchangeable Lenses; Passive Cooling The UFIBER™ series comprises precise and high-intensity UV LED spot-curing systems suitable for high-precision curing & bonding applications in a compact and versatile unit. In these intuitive systems, UWAVE combines the high performance and benefits of UV LED technology to deliver optimized & consistent light on a precise location. With irradiance levels reaching 1,200 mW/cm², UFIBER™ systems are perfect for in-lab tests and UV curing processes. For longer lifetime and more stable optical performances, a heat-sink body can be added onto the UFIBER™ body to improve thermal management. Four different lenses (window, large, medium & focus) can be mounted for different optical performances regarding power, spot size, etc. Theses lenses and LED heads can be used in any combination. Available wavelengths include 365 nm, 385 nm, 395 nm and 405 nm. Any other wavelength (UV-C, UV-B, Visible and IR) is available upon request, please contact AMS Technologies for further details. These combined features make UFIBER™ systems the perfect UV spotlight for quick and precise curing of adhesives, coatings and encapsulants. For powering and controlling the UFIBER™ systems, UWAVE provides different types of controllers for different requirements. The screen version of the UPOWER™ UV LED power supply & control unit can control up to six UFIBER™ heads simultaneously or independently. With its intuitive screen interface, it allows to choose mode, time and power parameters – including semi-automatic operation using a footswitch as well as fully automatic operation allowing smart communication with a PLC. The UFIBER™ LED has a much higher output power stability than other technologies and does not emit infrared radiation, thus heat-sensitive materials can be processed. UV LEDs are eco-friendly as they do not create ozone, do not contain mercury and only need a few watts to operate. Key Features: Powerful, Flexible & Compact Optical System With 4 Different Interchangeable Lenses: Window, Large, Medium & Focus Ideal for Low and High Production Volumes Thanks to an Easy Mechanical Integration Low Energy Consumption for High-quality Results Max. Irradiance: Up to 1,200 mW/cm² Wavelength: 365, 385, 395 or 405 nm Power Supply: Direct LED Control, 3 W Maximum Power Consumption Cooling System: Passive Air Cooling Body Material: Aluminium Alloy Dimensions: Diameter 12 mm; Length 60 mm (Window/Large/Medium Optics), 63 mm (Focus Optics), 92/95 mm Including Connector Weight: 15 g Applications: Manual and Automated High-precision UV Curing Processes; Curing of Optical Adhesives, Glues, Resins, Varnishes, etc.

Flexible & Homogeneous; Irradiance ≤50 mW/cm²; Wavelength 275-465 nm; Power Supply 24 VDC; Active Air Cooling With Fans UFLEX™ is a series of flexible and homogeneous UV LED line flood curing lamp systems, provided by UWAVE for a wide range of applications that need low UV energy such as curing, bonding, disinfection, or fluorescence. Thanks to its compact size, its integrated electronics, and its flexible length, the UFLEX™ series is an ideal solution for machine integration. Both manual & automated version are available depending on process parameters. Available wavelengths include 275 nm, 305 nm, 365 nm, 385 nm, 395 nm, 405 nm and 465 nm. Any other wavelength (UV-C, UV-B, Visible and IR) is available upon request, please contact AMS Technologies for further details. To fit mechanical specifications and constraints, the UFLEX™ series is available with a flexible length. Optical length can be adjusted using 5-LED increments (resulting in 10 cm length increments) to meet various process requirements. For powering and controlling the UFLEX™ systems, UWAVE provides different types of UPOWER™ UV LED power supply & control units for different requirements. Within the UPOWER™ range, the USPWR™ simple and compact power supply is the ideal choice for powering shorter UFLEX™ systems. As a lightweight bar equipped with a handle, the UFLEX-FLUO™ dedicated fluorescence kit can be used to inspect large areas and detect fluorescent products. Delivered in a complete & easy-to-use kit, the UFLEX-FLUO™ kit provides an adapted solution for operator fluorescence inspection and other non-destructive manual applications, containing: 1x UFLEX-365-FLUO with integrated handle 1x power supply cable 1x UV protection glasses Any other fluorescence wavelength (UV-C, UV-B, UV-A) is available upon request, please contact AMS Technologies for further details. Key Features: Robust and Lightweight Design for Manual Applications or to Facilitate Integration in Harsh Environments Flexible Length to Fit Mechanical Needs: 10 cm to 200 cm Max. Irradiance in the UV-A Range: Up to 50 mW/cm² Complete & Easy-to-use Kit for Manual Fluorescence Processes Wavelength: 275, 305, 365, 385, 395, 405 or 465 nm Power Supply: 24 VDC, Power Consumption Depends on No. of LEDs Cooling System: Active Air Cooling With Fans, Water Cooling Option Available Body Material: Aluminium Alloy Dimensions: 51 mm x 490 mm, Length Depends on No. of LEDs Weight: 60 g plus 60 g per LED Applications: Low-energy UV Curing, Bonding, Disinfection, or Fluorescence Processes; Curing of Optical Adhesives, Glues, Resins, Varnishes, etc.

Handheld, Wireless; Irradiance ≤2,500 mW/cm²; Wavelength 365, 385, 395, 405 nm; Power Supply Li-ion Battery; Passive Cooling With the UPEN™ series, UWAVE provides wireless, powerful & easy-to-use UV LED spot curing systems. Thanks to their on/off switch button and a unique LED technology, this series of UV LED pens provides instant, precise, efficient, and consistent UV light output for a majority of UV curable products. These combined features make UPEN™ the perfect tool for manual UV curing processes. It offers a curing source for all UV curable products (glues, resins, varnishes...) which react to 365 nm, 385 nm, 395 nm and 405 nm wavelengths. For convenient portable and manual use, UPEN™ UV LED spot curing systems are powered by a rechargeable Li-ion battery with around 2 hours runtime. The UPEN™ LED has a much higher output power stability than other technologies and does not emit infrared radiation, thus heat-sensitive materials can be processed. UV LEDs are eco-friendly as they do not create ozone, do not contain mercury and only need a few watts to operate. UPEN™ series UV LED products are delivered within a kit that contains every necessary tool for an efficient and safe curing process: UPEN™ Tool Two Rechargeable Li-ion Batteries Li-ion Batteries Charger USB Cable UV Protection Glasses Key Features: Powerful, Wireless & Easy-to-use Technology: Handheld UV LED Pen Max. Irradiance: Up to 2,500 mW/cm² Wavelength: 365, 385, 395 or 405 nm Power Supply: 1 Rechargeable Li-ion Battery Cooling System: Passive Operating Time: Up to 2 h Body Material: Aluminium Alloy Dimensions: Diameter 25 mm (Handle), 12 mm (Head); Length 146 mm Weight: 130 g (Including Battery) Applications: Manual UV Curing Processes; Curing of Optical Adhesives, Glues, Resins, Varnishes, etc.

Input Voltage 85-240 VAC, 50/60 Hz; Output Voltage 24/48 VDC; Output Power 50-3,000 W; No. of Channels 1-6 Compatible with the entire UWAVE lineup of UV curing systems, the UPOWER™ series of power supply and control units has been designed to be easily manipulated by the user or integrated into a production line. Depending on which product you want to control, UPOWER™ provides a suitable technical solution. UPOWER™ systems are available with output voltages of 24 or 48 VDC, output powers of 50, 200, 600, 1,500 or 3,000 W, and featuring 1, 2, 4 or 6 output channels. For the UFIBER™ UV LED spot curing systems, UWAVE has developed a screen version of the UPOWER™ (24 VDC, 200 W) to control up to six UFIBER™ UV LED curing spotlights independently. Thanks to its intuitive screen interface, this version allows to adjust mode, time, and power parameters: Possibility to control simultaneously or independently one to six UFIBER™ systems SWITCH mode allows the use of a footswitch for semi-automatic operation EXTERNAL CONTROL mode allows smart communication with a PLC for automatic operation The USPWR is a simple and compact 1-channel power supply to power UWAVE products with 24 VDC and 36 or 90 W output power. USPWR is compatible with all standard M12 connectors (4 or 5 pins). A switch allows to control the value of the 0/24 V signal, making it suitable for several UV LED lights like USPOT™, UTARGET-AUTO™, UFLEX™, ... Upon request, UWAVE can also produce custom power supplies, exactly tailored to requirements like number of UV LED lamps to connect, synchronization & communication with another equipment, type of connectors, a.s.o. Please contact AMS Technologies to discuss your customized UV LED power supply and control unit. Key Features: Start & Stop Buttons Key to Lock Parameters Timer: 1 s to 100 min With a 1 s Resolution Power: 20% to 99% With a 1% Resolution Rear Connectors for Chiller, Footswitch or External Control (PLC) Input Voltage: 85 to 264 VAC, 50/60 Hz, Single Phase Output Voltage: 24/48 VDC Body Material: Aluminium Alloy Dimensions: 250 mm x 410 mm x 120 mm (50 to 600 W); 340 mm x 460 mm x 120 mm (1,500, 3,000 W) Weight: 5.6 to 10 kg Application: Powering and Controlling UWAVE UV LED Curing Systems

Homogeneous & Precise; Irradiance ≤900 mW/cm²; Wavelength 365, 385, 395, 405 nm; Power Supply 24 VDC, 5 W; 3 Interchangeable Optical Systems; Passive Cooling The USHARP™ series UV LED spot curing systems are homogeneous & precise LED spots, suitable for low-power UV curing, fluorescence & photolithography applications. With these systems, UWAVE provides a solution that can be either adapted for manual processes or integrated in automated lines. Three different optical systems (far field, medium field, near field) can be mounted onto the USHARP™ to get different optical performances (power, homogeneity, size...). With this integrated optical system, users can adjust the UV spot size while keeping the same working distance. This will result in a very precise UV illumination profile with very little losses of irradiance. Intermediate positions allow to illuminate with a different spot size with one single optical system. Available wavelengths include 365 nm, 385 nm, 395 nm and 405 nm. Any other wavelength (UV-C, UV-B, Visible and IR) is available upon request, please contact AMS Technologies for further details. For powering and controlling the USHARP™ systems, UWAVE provides different types of UPOWER™ UV LED power supply & control units for different requirements. UWAVE has designed its products to fit OEM and system integrator requirements. Thus, it is possible to control USHARP™ systems directly from the PLC (Programmable Logic Control). Many options are available such as temperature monitoring or the control of UV irradiance and time of exposure. The USHARP™ LED has a much higher output power stability than other technologies and does not emit infrared radiation, thus heat-sensitive materials can be processed. UV LEDs are eco-friendly as they do not create ozone, do not contain mercury and only need a few watts to operate. Key Features: High-precision Light Beam Adaptable to a Wide Range of Working Distances More Than 90% Homogeneity for Perfect Irradiance Contrast Innovative Integrated Optical System to Adapt the Beam at Best Max. Irradiance: 700 mW/cm² (365 nm), 900 mW/cm² (385-405 nm) Wavelength: 365, 385, 395 or 405 nm Power Supply: 24 VDC, 5 W Cooling System: Passive Body Material: Aluminium Alloy Dimensions: Diameter 32 mm; Length up to 200 mm Weight: 300 g Applications: High-precision UV Curing Processes; Curing of Optical Adhesives, Glues, Resins, Varnishes, etc.; Curing UV Resins in Electronic Assemblies; UV Fluorescent Examination; UV Detection of QR-codes or Security Marks in Automated Processes; Assembling Components in the Opto-electronic Industries and Processes

Powerful & Robust; Irradiance ≤4,000 mW/cm²; Wavelength 365, 385, 395, 405 nm; Power Supply 24 VDC, 50 W; Active Air Cooling With Fan UWAVE has designed the USPOT™ series of powerful & robust UV LED spot curing systems to be integrated in automated production lines. Thanks to its efficient optical system, high optical power and smart design, USPOT™ series UV LED spots can be easily fit to OEM and integrators needs. With up to 4,000 mW/cm² optical power, the USPOT™ series also performs very well in curing high-precision dots of glue and coating over large thicknesses. An integrated smart optical system allows to work at large working distances (several dozens of centimeters), while maintaining a high UV output power. A “window option” also allows delivery without this optical system to provide a more compact, affordable and dispersive UV LED spot curing system. Available wavelengths include 365 nm, 385 nm, 395 nm and 405 nm. In addition to that, UWAVE has developed a UV-C LED version of the USPOT™ series to meet actual concerns on contamination and spread of virus and bacteria. Equipped with the best 275 nm LED in the market (up to 140 mW/cm²), this model “USPOT-275-WINDOW” allows a quick & efficient disinfection process for automated lines or R&D tests. For this model or any other wavelength (UV-C, UV-B, Visible and IR) available upon request, please contact AMS Technologies to receive further details. For powering and controlling the USPOT™ systems, UWAVE provides different types of UPOWER™ UV LED power supply & control units for different requirements. UWAVE has designed its products to fit OEM and system integrator requirements. Thus, it is possible to control USPOT™ systems directly from the PLC (Programmable Logic Control) to facilitate integration into production lines. Many options are available such as temperature monitoring or the control of UV irradiance and time of exposure. The USPOT™ LED has a much higher output power stability than other technologies and does not emit infrared radiation, thus heat-sensitive materials can be processed. UV LEDs are eco-friendly as they do not create ozone, do not contain mercury and only need a few watts to operate. Key Features: Integrated Optical System Allows to Work at Higher Working Distances Easily Controllable With a PLC to Facilitate Integration into Production Lines Max. Irradiance: Up to 4,000 mW/cm² Response Time: 50 µs Wavelength: 365, 385, 395 or 405 nm Power Supply: 24 VDC, 50 W Cooling System: Active Air Cooling With Fan Body Material: Aluminium Alloy Dimensions: 65 mm x 71 mm x 172 mm Weight: 800 g Applications: High-power UV Curing Processes; Curing of Optical Adhesives, Glues, Resins, Varnishes, etc.; Curing of UV Glues for the Cosmetic Industry; UV Assembly and Encapsulation in Optoelectronics; UV Curing for Coatings & Resins in Electronics

Handheld; Irradiance ≤1,900 mW/cm²; Wavelength 365, 385, 395, 405 nm; Power Supply 24 VDC; Passive Cooling UTARGET™ is a series of powerful, flexible and portable UV LED spot curing systems especially designed by UWAVE for manual UV curing processes. Thanks to its own integrated optical system with lens positioning possibilities for focalized to collimated UV light, this UV LED pen series provides high irradiance and high optical flexibility. The UV LED head has been uniquely designed to create an infinite range of spot sizes without any additional costs. The position of the optics is adjustable to perfectly fit the spot size to your application. Available wavelengths include 365 nm, 385 nm, 395 nm and 405 nm. Any other wavelength (UV-C, UV-B, Visible and IR) is available upon request, please contact AMS Technologies for further details. A control system directly integrated into the body of the UTARGET™ LED spot curing system allows to adapt the UV LED head’s irradiance level to your application quickly and easily in nine different power level steps up to 1,900 mW/cm². These combined features make UTARGET™ tools suitable for a wide range of manual or automated UV curing and bonding processes. For manual applications, the UTARGET™ UV LED spot curing system is delivered in a kit in a complete & easy-to-handle case containing all the required equipment for a quick and safe use: UTARGET™ Tool Power Supply Cable UV Protection Glasses Desktop Holder To go even further with this approach, an automated version of the UTARGET™ UV LED spot curing system is available, allowing for integration in automated or semi-automated assembling lines. Thanks to its electronical structure, this automated version can be directly managed by a PLC, or it can be connected to an adapted UPOWER™ power supply. Fluorescence Option: Thanks to the use of an adapted optical filter, the 365 nm UTARGET-FLUO™ can be upgraded for fluorescence and other non-destructive applications. This option allows to obtain a compact and easy-to-use fluorescence lamp for visual inspection operations. Any other fluorescence wavelengths (UV-C, UV-B, UV-A) are available upon request, please contact AMS Technologies for further details. The UTARGET™ LED has a much higher output power stability than other technologies and does not emit infrared radiation, thus heat-sensitive materials can be processed. UV LEDs are eco-friendly as they do not create ozone, do not contain mercury and only need a few watts to operate. Key Features: Powerful, Flexible & Easy-to-use Manual and Automated Version Available Adjustable Optical System – Spot Sizes From Collimated to Focused Max. Irradiance: Up to 1,900 mW/cm² Wavelength: 365, 385, 395 or 405 nm Power Supply: 24 VDC, 4 W Cooling System: Passive Body Material: Aluminium Alloy Dimensions: Diameter 22 mm (Body), 36 mm (Head); Length 150 mm Weight: 130 g Applications: Manual and Automated UV Curing Processes; Curing of Optical Adhesives, Glues, Resins, Varnishes, etc.

Handheld; Irradiance ≤1,400 mW/cm²; Wavelength 365 nm; Power Supply 24 VDC; Passive Cooling A powerful, flexible and portable UV LED spot curing system especially designed for manual UV curing processes. Thanks to its own integrated optical system with lens positioning possibilities for focalized to collimated UV light, this UV LED pen series provides high irradiance levels and high optical flexibility. The UTARGET™ UV LED head has been uniquely designed to create an infinite range of spot sizes without any additional costs. The position of the optics is adjustable to perfectly fit the spot size to your application. A control system directly integrated into the body of the UTARGET™ LED spot curing system allows to adapt the UV LED head’s irradiance level to your application quickly and easily in nine different power level steps up to 1,400 mW/cm² for the 365 nm version. These combined features make UTARGET™ tools suitable for a wide range of manual or automated UV curing and bonding processes. For manual applications, the UTARGET™ UV LED spot curing system is delivered in a kit in a complete & easy-to-handle case containing all the required equipment for a quick and safe use: UTARGET™ Tool Power Supply Cable UV Protection Glasses Desktop Holde