Located in Pennsylvania, High Energy Corporation (HEC) is a leading manufacturer of High Voltage oil-filled and ceramic capacitors used in a wide range of military, industrial and commercial applications. HEC's capacitors are used in HV power supplies, X-ray equipment, HF radio equipment, induction heating machinery, cable fault finders and other RF, HV and high current applications.
AR Series Water-Cooled Oil-Filled Film Capacitors
6.0 µF to 1400 µF; 750 kv to 1250 kv; 300 kVA to 1600 kVA
High capacitance at high power
6 to 1,400 µF capacitance
800 to 1,250 VRMS
240 to 2,000 ARMS
300 to 2,000 kVA
Up to 25 kHz
These oil-filled, water-cooled capacitors are aimed at particularly demanding applications such as high-voltage systems, pulsed lasers or induction heating. Select the right component from our portfolio of oil-filled capacitors. We offer a wide range of standard packing components and internal structures that make the capacitors suitable for energy storage, DC filtering, transient snubbing and high alternating current applications. The standard types offered here do not provide the solution to your challenge? We design, manufacture and test customized oil-filled capacitors according to your specifications - please contact us!
Product number:
SW10338
Manufacturer:
HIGH ENERGY CORPORATION
CC Series Oil-Filled Film Capacitors
1 µF to 20 µF; 2,000 kv to 10,000 kv
DC Filter Capacitors
1 to 20 µF capacitance
Voltage 2,000 to 10,000 VDC
Plated drawn steel cans
Our oil-filled capacitors are aimed at particularly demanding applications such as high-voltage systems, pulsed lasers or induction heating. Select the right component from our portfolio of oil-filled capacitors. We offer a wide range of standard packing components and internal structures that make the capacitors suitable for energy storage, DC filtering, transient snubbing and high alternating current applications. The standard types offered here do not provide the solution to your challenge? We design, manufacture and test customized oil-filled capacitors according to your specifications - please contact us!
Specifications
Capacitance Range 1 to 20 µF
Capacitance Tolerance ± 10 % standard, other tolerances available
Operating Temperature -40 °C to +90 °C
Insulation Resistance 25,000 MΩ•µF at 25 °C typical
AC Ripple Voltage The sum of the DC voltage and peak AC ripple should not exceed the capacitor’s VDC rating.
Additionally, the AC component should not exceed: 20 % of VDC at 60 Hz; 10 % of VDC at 400Hz; 5 % of VDC at 1 kHz; 1 % of VDC at 10 kHz
Can Construction Drawn plated steel, epoxy paint optional
Dielectric Kraft paper and polypropylene with environmentally compatible impregnant
Product number:
SW10336
Manufacturer:
HIGH ENERGY CORPORATION
CHD Series Metallized Film Capacitors
0.01 µF to 0.33 µF ; VMAX 700 kV; SMAX 150 kVA
700 VRMS Working Voltage
150 kVA Max Power
250 ARMS Max Current
Conduction Cooled
Series & Parallel Stackable
This series of metallized film capacitors basically consists of a wound core soldered between copper terminals. This wound core is composed of two metallic electrodes separated by an insulating dielectric, a thin film of polypropylene. Among the many possible types of core windings in our wide range of metallized film capacitors, the engineers select the type that optimizes the component for a particular mission profile. Due to the materials selected and the special design, these high power capacitors are very robust and reliable (self-healing). The metallized film capacitors offer high capacitance in a small package and allow for parallel or serial stacking. They are conduction cooled, can pass high reactive currents without failure withstand very significant voltage potentials without damage.
Specifications
Capacitance Range 0.1 to 0.2 µF standard; 0.01 to 0.33 custom
Capacitance Tolerance ± 10 % standard, other tolerances available
Dimensions 68 x 33 x 22.5 mm, 2 11/16 x 1 5/32 x 7/8 inch
Weight 0.2 kg; .44 lb
Operating Temperature Up to +90 °C
Cooling method Conduction-cooled by bus bars
Dissipation Factor 0.1 % Maximum
Stray Inductance less than 5 nH
Product number:
SW10320
Manufacturer:
HIGH ENERGY CORPORATION
CHE Series Metallized Film Capacitors
0.2 µF to 2.0 µF ; 525 kV to 700 kv; 325 kVA to 400 kVA
Up to 700 VRMS Working Voltage
Up to 400 kVA Max Power
Up to 800 ARMS Max Current
Conduction Cooled
Series & Parallel Stackable
This series of metallized film capacitors basically consists of a wound core soldered between copper terminals. This wound core is composed of two metallic electrodes separated by an insulating dielectric, a thin film of polypropylene. Among the many possible types of core windings in our wide range of metallized film capacitors, the engineers select the type that optimizes the component for a particular mission profile. Due to the materials selected and the special design, these high power capacitors are very robust and reliable (self-healing). The metallized film capacitors offer high capacitance in a small package and allow for parallel or serial stacking. They are conduction cooled, can pass high reactive currents without failure withstand very significant voltage potentials without damage.
Specifications
Capacitance Range 0.2 to 2.0 µF standard; 0.01 to 0.33 custom
Capacitance Tolerance ± 10 % standard, other tolerances available
Dimensions 70 x 57 x 41 mm, 2 3/4 x 2 1/4 x 2 5/8 inch
Weight 0.5 kg; 1.1 lb
Operating Temperature Up to +90 °C
Cooling method Conduction-cooled by bus bars
Dissipation Factor 0.1 % Maximum
Stray Inductance less than 5 nH
Product number:
SW10321
Manufacturer:
HIGH ENERGY CORPORATION
CHG Series Metallized Film Capacitors
0.1 µF to 1.32 µF ; 500 kV to 1000 kv; SMAX 300 kVA
Up to 700 VRMS Working Voltage
600 kVA Max Power
Up to 525 ARMS Max Current
Conduction Cooled
Series & Parallel Stackable
This series of metallized film capacitors basically consists of a wound core soldered between copper terminals. This wound core is composed of two metallic electrodes separated by an insulating dielectric, a thin film of polypropylene. Among the many possible types of core windings in our wide range of metallized film capacitors, the engineers select the type that optimizes the component for a particular mission profile. Due to the materials selected and the special design, these high power capacitors are very robust and reliable (self-healing). The metallized film capacitors offer high capacitance in a small package and allow for parallel or serial stacking. They are conduction cooled, can pass high reactive currents without failure withstand very significant voltage potentials without damage.
Specifications
Capacitance Range 0.18 to 1.2 µF standard; 0.01 to 0.33 custom
Capacitance Tolerance ± 10 % standard, other tolerances available
Dimensions 49 x 49 x 30 mm, 1 15/16 x 1 15/16 x 1 3/16 inch
Weight 0.25 kg; 0.5 lb
Operating Temperature Up to +90 °C
Cooling method Conduction-cooled by bus bars
Dissipation Factor 0.1 % Maximum
Stray Inductance less than 5 nH
Product number:
SW10322
Manufacturer:
HIGH ENERGY CORPORATION
CHH Series Metallized Film Capacitors
0.1 µF to 2.5 µF ; 400 kV to 700 kv; SMAX 160 kVA
Up to 700 VRMS Working Voltage160 kVA Max PowerUp to 625 ARMS Max CurrentConduction CooledSeries & Parallel Stackable
This series of metallized film capacitors basically consists of a wound core soldered between copper terminals. This wound core is composed of two metallic electrodes separated by an insulating dielectric, a thin film of polypropylene. Among the many possible types of core windings in our wide range of metallized film capacitors, the engineers select the type that optimizes the component for a particular mission profile. Due to the materials selected and the special design, these high power capacitors are very robust and reliable (self-healing). The metallized film capacitors offer high capacitance in a small package and allow for parallel or serial stacking. They are conduction cooled, can pass high reactive currents without failure withstand very significant voltage potentials without damage.
Specifications
Capacitance Range 0.1 to 2.5 µF standard; 0.01 to 0.33 custom
Capacitance Tolerance ± 10 % standard, other tolerances available
Dimensions 68 x 30.2 x 30.2 mm, 2 11/16 x 1 3/16 x 1 3/16 inch
Weight 0.5 kg; 1.1 lb
Operating Temperature Up to +90 °C
Cooling method Conduction-cooled by bus bars
Dissipation Factor 0.1 % Maximum
Stray Inductance less than 5 nH
Product number:
SW10323
Manufacturer:
HIGH ENERGY CORPORATION
CHJ Series Metallized Film Capacitors
0.18 µF to 5.0 µF ; 300 kV to 700 kv; 180 kVS to 210 kVA
Up to 700 VRMS Working Voltage
Up to 210 kVA Max Power
Up to 600 ARMS Max Current
Conduction Cooled
Series & Parallel Stackable
This series of metallized film capacitors basically consists of a wound core soldered between copper terminals. This wound core is composed of two metallic electrodes separated by an insulating dielectric, a thin film of polypropylene. Among the many possible types of core windings in our wide range of metallized film capacitors, the engineers select the type that optimizes the component for a particular mission profile. Due to the materials selected and the special design, these high power capacitors are very robust and reliable (self-healing). The metallized film capacitors offer high capacitance in a small package and allow for parallel or serial stacking. They are conduction cooled, can pass high reactive currents without failure withstand very significant voltage potentials without damage.
Specifications
Capacitance Range 0.18 to 5.0 µF standard; 0.01 to 0.33 custom
Capacitance Tolerance ± 10 % standard, other tolerances available
Dimensions 76.2 x 50.8 x 36.5 mm, 3 x 2 x 1 7/16 inch
Weight 0.27 kg; 0.6 lb
Operating Temperature Up to +90 °C
Cooling method Conduction-cooled by bus bars
Dissipation Factor 0.1 % Maximum
Stray Inductance less than 5 nH
Product number:
SW10324
Manufacturer:
HIGH ENERGY CORPORATION
CHL Series Metallized Film Capacitors
0.1 µF to 2.5 µF ; 400 kV to 700 kv; SMAX 160 kVA
Up to 700 VRMS Working Voltage
160 kVA Max Power
Up to 400 ARMS Max Current
Conduction Cooled
Series & Parallel Stackable
This series of metallized film capacitors basically consists of a wound core soldered between copper terminals. This wound core is composed of two metallic electrodes separated by an insulating dielectric, a thin film of polypropylene. Among the many possible types of core windings in our wide range of metallized film capacitors, the engineers select the type that optimizes the component for a particular mission profile.Due to the materials selected and the special design, these high power capacitors are very robust and reliable (self-healing). The metallized film capacitors offer high capacitance in a small package and allow for parallel or serial stacking. They are conduction cooled, can pass high reactive currents without failure withstand very significant voltage potentials without damage.
Specifications
Capacitance Range 0.1 to 2.5 µF standard; 0.01 to 0.33 custom
Capacitance Tolerance ± 10 % standard, other tolerances available
Dimensions 68 x 32 x 30.2 mm, 2 11/16 x 1 1/4 x 1 3/16 inch
Weight 0.5 kg; 1.1 lb
Operating Temperature Up to +90 °C
Cooling method Conduction-cooled by bus bars
Dissipation Factor 0.1 % Maximum
Stray Inductance less than 5 nH
Product number:
SW10325
Manufacturer:
HIGH ENERGY CORPORATION
CHM Series Metallized Film Capacitors
0.1 µF to 2.5 µF ; 400 kV to 700 kv; SMAX 160 kVA
Up to 700 VRMS Working Voltage
60 kVA Max Power
Up to 400 ARMS Max Current
Conduction Cooled
Series & Parallel Stackable
This series of metallized film capacitors basically consists of a wound core soldered between copper terminals. This wound core is composed of two metallic electrodes separated by an insulating dielectric, a thin film of polypropylene. Among the many possible types of core windings in our wide range of metallized film capacitors, the engineers select the type that optimizes the component for a particular mission profile. Due to the materials selected and the special design, these high power capacitors are very robust and reliable (self-healing). The metallized film capacitors offer high capacitance in a small package and allow for parallel or serial stacking. They are conduction cooled, can pass high reactive currents without failure withstand very significant voltage potentials without damage.
Specifications
Capacitance Range 0.1 to 2.5 µF standard; 0.01 to 0.33 custom
Capacitance Tolerance ± 10 % standard, other tolerances available
Dimensions 70 x 32 x 30.2 mm, 23/4 x 11/4 x 13/16 inch
Weight 0.5 kg; 1.1 lb
Operating Temperature Up to +90 °C
Cooling method Conduction-cooled by bus bars
Dissipation Factor 0.1 % Maximum
Stray Inductance less than 5 nH
Product number:
SW10326
Manufacturer:
HIGH ENERGY CORPORATION
CHN0 Series Metallized Film Capacitors
1.4 µF to 10 µF; 600 kV to 650 kv; SMAX 250 kVA
Up to 650 VRMS Working Voltage
250 kVA Max Power
Up to 600 ARMS Max Current
Conduction Cooled
Up to 10 µF
This series of metallized film capacitors basically consists of a wound core soldered between copper terminals. This wound core is composed of two metallic electrodes separated by an insulating dielectric, a thin film of polypropylene. Among the many possible types of core windings in our wide range of metallized film capacitors, the engineers select the type that optimizes the component for a particular mission profile. Due to the materials selected and the special design, these high power capacitors are very robust and reliable (self-healing). The metallized film capacitors offer high capacitance in a small package and allow for parallel or serial stacking. They are conduction cooled, can pass high reactive currents without failure withstand very significant voltage potentials without damage.
Specifications
Capacitance Range 1.4 to 10 µF
Capacitance Tolerance ± 10 % standard, other tolerances available
Dimensions 80 mm (maximum) diameter x 70 mm high, 31/8 (maximum) diameter x 23/4 high
Weight .75 kg; 1.7 lb
Operating Temperature Up to +90 °C
Cooling method Conduction-cooled by bus bars
Dissipation Factor 0.1 % Maximum
Stray Inductance less than 5 nH
Product number:
SW10327
Manufacturer:
HIGH ENERGY CORPORATION
CHN6 Series Metallized Film Capacitors
0.03 µF to 1.2 µF; 450 kV to 1000 kv; SMAX 120 kVA
Up to 1000 VRMS Working Voltage
120 kVA Max Power
Up to 125 ARMS Max Current
Conduction Cooled
This series of metallized film capacitors basically consists of a wound core soldered between copper terminals. This wound core is composed of two metallic electrodes separated by an insulating dielectric, a thin film of polypropylene. Among the many possible types of core windings in our wide range of metallized film capacitors, the engineers select the type that optimizes the component for a particular mission profile. Due to the materials selected and the special design, these high power capacitors are very robust and reliable (self-healing). The metallized film capacitors offer high capacitance in a small package. They are conduction cooled, can pass high reactive currents without failure withstand very significant voltage potentials without damage.
Specifications
Capacitance Range 0.025 to 1.2 µF
Capacitance Tolerance ± 10 % standard, other tolerances available
Dimensions 30 mm diameter x 29 mm high, 1 3/16 “ diameter x 1 1/8 “ high
Weight .15 kg; .33 lb
Operating Temperature Up to +90 °C
Cooling method Conduction-cooled by bus bars
Dissipation Factor 0.1 % Maximum
Stray Inductance less than 5 nH
Product number:
SW10328
Manufacturer:
HIGH ENERGY CORPORATION
CHX Series Water-Cooled Film Capacitors
0.06 µF to 0.69; VMAX 1500 kv; SMAX 300 kVA
1500 VRMS Working Voltage
300 kVA Max Power
Up to 200 ARMS Max Current
Water-Cooled
This series of water cooled metallized film capacitors basically consists of a wound core soldered between copper terminals. This wound core is composed of two metallic electrodes separated by an insulating dielectric, a thin film of polypropylene. Among the many possible types of core windings in our wide range of metallized film capacitors, the engineers select the type that optimizes the component for a particular mission profile. Due to the materials selected and the special design, these high power capacitors are very robust and reliable (self-healing). The metallized film capacitors offer high capacitance in a small package. They are water cooled, can pass high reactive currents without failure withstand very significant voltage potentials without damage.
Specifications
Capacitance Range 0.06 µF standard; up to 0.069 µF custom
Capacitance Tolerance ± 10 % standard, other tolerances available
Dimensions 53 mm diameter x 71 mm high, 2 1/16 “ diameter x 2 13/16 “ high
Weight .36 kg; .79 lb
Operating Temperature Up to +90 °C
Cooling method Individually water-cooled
Dissipation Factor 0.1 % Maximum
Stray Inductance less than 5 nH
Product number:
SW10329
Manufacturer:
HIGH ENERGY CORPORATION
CP Series Oil-Filled Film Capacitors
0.01 µF to 1 µF; 10,000 kv to 100,000 kv
DC Filter Capacitors
0.01 to 1 µF capacitance
Voltage 10,000 to 100,000 VDC
Welded Polypropylene cases
Our oil-filled capacitors are aimed at particularly demanding applications such as high-voltage systems, pulsed lasers or induction heating. Select the right component from our portfolio of oil-filled capacitors. We offer a wide range of standard packing components and internal structures that make the capacitors suitable for energy storage, DC filtering, transient snubbing and high alternating current applications. The standard types offered here do not provide the solution to your challenge? We design, manufacture and test customized oil-filled capacitors according to your specifications - please contact us!
Specifications
Capacitance Range 0.01 to 1 µF
Capacitance Tolerance ± 10 % standard, other tolerances available
Operating Temperature -40 °C to +90 °C
Insulation Resistance 25,000 MΩ•µF at 25 °C typical
AC Ripple Voltage The sum of the DC voltage and peak AC ripple should not exceed the capacitor’s VDC rating. Additionally, the AC component should not exceed: 20 % of VDC at 60 Hz, 10 % of VDC at 400Hz, 5 % of VDC at 1 kHz, 1 % of VDC at 10 kHz
Case Construction Welded Polypropylene plastic
Dielectric Kraft paper and polypropylene with environmentally compatible impregnant
Product number:
SW10340
Manufacturer:
HIGH ENERGY CORPORATION
EPSL Series Ceramic Capacitors
180 pF to 16,000 pF; 6 kV to 40 kV
Features
Designed For High Voltage DC-Blocking
High Capacitance Values in Small Size
Rugged & Epoxy Encapsulated
High-Torque Terminals Available
Class II X5U Dielectric
Specifications
Temperature Range Operating: -55 °C to +85 °C
Storage: -55 °C to +125 °C
Capacitance Tolerance +80 %, -20 % standard
Dissipation Factor 1.5 % Maximum when measured at a frequency of 1 kHz and 25 °C
Dielectric Characteristic Class II X5U (+22 %, -56 % capacitance change with temperature over -55 °C to +85 °C)
Dielectric Strength Will withstand a DC potential of 1.5 times VMAX rating for 10 Seconds at 25 °C
Insulation Resistance 20,000 Megohms (MΩ) Minimum at 100 VDC
Terminal Strength Maximum applied torque to be 12 inch-pounds or less (standard S terminal)
Maximum applied torque to be 25 inch-pounds or less (high-strength H terminal)
Humidity Protection Epoxy encapsulated
Standard Markings “HEC”, Capacitance, Tolerance, Rated Working Voltage (VDC) and Date Code
Product number:
SW10313
Manufacturer:
HIGH ENERGY CORPORATION
EPSP Pulse Power Ceramic Capacitors
500 pF to 4,000 pF; 20 kV to 52 kV
The EPSP Series of pulse power ceramic capacitors are optimized for sourcing and sinking short-duration high-current pulses. They are ideal components for use in pulsed gas laser systems, HVDC power supplies, lightning arrestor systems, electrostatic copying machines and electron microscopes. They utilize an N5500 temperature characteristic Class 1 dielectric to achieve a very low dissipation factor coupled with a very high capacitance-per-volume and an absence of etectable piezoelectric or electrorestrictive effects. Epoxy encapsulation provides excellent insulation resistance and a physically robust package.
Specification
Temperature Range Operating: -30 °C to +50 °C
Storage: -30 °C to +50 °C
Capacitance Tolerance ± 20 % standard; other tolerances available
Dissipation Factor 0.5 % Maximum when measured at a frequency of 1 kHz
Dielectric Characteristic Class I N5500 (± 1000 ppm/ °C) over the Operating Temperature range
Dielectric Strength Will withstand a DC potential of VTEST (listed above) for 10 Seconds at 25 °C
Insulation Resistance 20,000 Megohms (MΩ) Minimum at 100 VDC
Terminal Strength Maximum applied torque to be 20 inch-pounds or less
Humidity Protection Epoxy encapsulated
Standard Markings “HEC”, Capacitance, Tolerance, Rated Working Voltage (VDC), TC and Date Code
Product number:
SW10312
Manufacturer:
HIGH ENERGY CORPORATION
EPSR Series High Voltage Pulse Power Ceramic Capacitors
700 pF to 4,000 pF; 20 kV to 40 kV
High Energy Corporation's new line of Epoxy Encapsulated Ceramic Capacitors are designed for use in HVDC Power Supplies, electrostatic copying machines, lightning arrestor systems, electron microscopes and many laser applications. These capacitors feature a class I ceramic dielectric, low dissipation factor, and small case size.
Specification
Temperature Operating -300 °C to +500 °C
Range: storage -300 °C to +500 °C
Capacitance listed as +/- 20 %, other values
Tolerance: available
Dissipation 0.5 % maximum, when MeaFactor: sured at a frequency of 1 KHz.
Dielectric all capacitors will withstand a strength DC test voltage, as listed, for test: 10 sec. at a temp. of 250 °C
Product number:
SW10307
Manufacturer:
HIGH ENERGY CORPORATION
HH57 & HH58 Series Ceramic Capacitors
500 pF to 2,500 pF; 7.5 kV to 15 kV; 0.6 kVA to 35 kVA; Class II Dielectrics
Features
Compact High Capacitance Parts
7.5 and 15 kVDC Power Ratings
Broadcast Barrel Package
Metric or English Terminals
Three Class II Dielectrics
Specifications
Temperature Range Operating: -55 °C to +85 °C
Storage: -55 °C to +125 °C
Capacitance Tolerance ± 10 % or ± 20 % standard
Dissipation Factor 1.5 % Maximum when measured at a frequency of 1 kHz and 25 °C
Dielectric Characteristic Class II X5T (+22 %, -33 % capacitance change with temperature over -55 °C to +85 °C), or X5U (+22 %, -56 % capacitance change with temperature over -55 °C to +85 °C), or X5V (+22 %, -82 % capacitance change with temperature over -55 °C to +85 °C)
Dielectric Strength Will withstand an AC potential of 1.5 times Rated Working Voltage for 10 Seconds at 25 °C.
Insulation Resistance 10,000 Megohms (MΩ) Minimum at 100 VDC
Terminals Silver Plated
Terminal Strength Maximum applied torque to be 20 inch-pounds or less (HH57 series), 6 inch-pounds or less (HH58 series with standard terminal), 17 inch-pounds or less (HH58 series with solid terminal)
Humidity Protection Nonconductive Coating
Standard Markings “HEC”, Capacitance, Tolerance, Rated Working Voltage (VDC) and Date Code
Product number:
SW10318
Manufacturer:
HIGH ENERGY CORPORATION
HT50 & HT58 Series Ceramic Capacitors
10 pF to 700 pF; VMAX 7.5 kV; SMAX 10 kVA
HT Series Ceramic Capacitors are small, RF-capable, Class 1 parts featuring high Voltage, Current and Power ratings. They exhibit a low dissipation factor and minimum self-inductance. These extremely rugged capacitors are carefully designed to live in the demanding world of broadcast and high-voltage industrial application. Their structure is both simple and robust, assuring a long trouble free life. HT Series parts feature a nonconductive, humidity-resistant, coating and a long flashover path. They are built upon a choice ofsix Class I dielectrics, providing a broad range of capacitance and temperature coefficients. Typical applications include transmitters, antennas, induction heating, X-ray, diathermy and welding.
Specifications
Temperature Range Operating: -55 °C to +85 °C
Storage: -55 °C to +125 °C
Capacitance Tolerance From ± 2.5 % to ± 20% and from ±2.5 pF to ±1 pF
Dissipation Factor 0.1 % to 0.5 % Maximum (see Dielectric chart above)
Dielectric Strength Will withstand an AC potential of 1.5 times Rated Working Voltage for 10 Seconds at 25 °C.
Insulation Resistance 10,000 Megohms (MΩ) Minimum
Terminals Silver Plated
Terminal Strength Maximum applied torque to be 20 inch-pounds or less (HT57 & HT59 series), 6 inch-pounds or less (HT50 & HT58 series with standard terminal), 17 inch-pounds or less (HT 50 & HT58 series with solid terminal)
Humidity Protection Nonconductive Coating
Standard Markings “HEC”, Capacitance, Tolerance, Rated Working Voltage (VDC), TC and Date Code
Product number:
SW10316
Manufacturer:
HIGH ENERGY CORPORATION
HT53, HT54, HT55 Series Ceramic Capacitors
1 pF to 45 pF; VMAX 5 kV; SMAX 3 kVA to 7 kVA
HT Series Ceramic Capacitors are small, RF-capable, Class 1 parts featuring high Voltage, Current and Power ratings. They exhibit a low dissipation factor and minimum self-inductance. These extremely rugged capacitors are carefully designed to live in the demanding world of broadcast and high-voltage industrial application. Their structure is both simple and robust, assuring a long trouble free life. HT Series parts feature a nonconductive, humidity-resistant, coating and a long flashover path. They are built upon a choice ofsix Class I dielectrics, providing a broad range of capacitance and temperature coefficients. Typical applications include transmitters, antennas, induction heating, X-ray, diathermy and welding.
Specificatons
Temperature Range Operating: -55 °C to +85 °C
Storage: -55 °C to +125 °C
Capacitance Tolerance From ± 2.5 % to ± 20% and from ±2.5 pF to ±1 pF
Dissipation Factor 0.1 % to 0.5 % Maximum (see Dielectric chart above)
Dielectric Strength Will withstand an AC potential of 1.5 times Rated Working Voltage for 10 Seconds at 25 °C.
Insulation Resistance 10,000 Megohms (MΩ) Minimum
Terminals Silver Plated
Terminal Strength Maximum applied torque to be 20 inch-pounds or less (HT57 & HT59 series). 6 inch-pounds or less (HT50 & HT58 series with standard terminal), 17 inch-pounds or less (HT 50 & HT58 series with solid terminal)
Humidity Protection Nonconductive Coating
Standard Markings “HEC”, Capacitance, Tolerance, Rated Working Voltage (VDC), TC and Date Code
Product number:
SW10317
Manufacturer:
HIGH ENERGY CORPORATION
HT57 Series Ceramic Capacitors
10 pF to 500 pF; VMAX 15 kV; SMAX 35 kVA
HT Series Ceramic Capacitors are small, RF-capable, Class 1 parts featuring high Voltage, Current and Power ratings. They exhibit a low dissipation factor and minimum self-inductance. These extremely rugged capacitors are carefully designed to live in the demanding world of broadcast and high-voltage industrial application. Their structure is both simple and robust, assuring a long trouble free life. HT Series parts feature a nonconductive, humidity-resistant, coating and a long flashover path. They are built upon a choice ofsix Class I dielectrics, providing a broad range of capacitance and temperature coefficients. Typical applications include transmitters, antennas, induction heating, X-ray, diathermy and welding.
Specifications
Temperature Range Operating: -55 °C to +85 °C
Storage: -55 °C to +125 °C
Capacitance Tolerance From ± 2.5 % to ± 20 % and from ±2.5 pF to ±1 pF
Dissipation Factor 0.1 % to 0.5 % Maximum (see Dielectric chart above)
Dielectric Strength Will withstand an AC potential of 1.5 times Rated Working Voltage for 10 Seconds at 25 °C.
Insulation Resistance 10,000 Megohms (MΩ) Minimum
Terminals Silver Plated
Terminal Strength Maximum applied torque to be 20 inch-pounds or less (HT57 & HT59 series), 6 inch-pounds or less (HT50 & HT58 series with standard terminal), 17 inch-pounds or less (HT 50 & HT58 series with solid terminal)
Humidity Protection Nonconductive Coating
Standard Markings “HEC”, Capacitance, Tolerance, Rated Working Voltage (VDC), TC and Date Code
Product number:
SW10314
Manufacturer:
HIGH ENERGY CORPORATION
HT59 Series Ceramic Capacitors
50 pF to 1,500 pF; VMAX 25 kV; SMAX 50 kVA
HT Series Ceramic Capacitors are small, RF-capable, Class 1 parts featuring high Voltage, Current and Power ratings. They exhibit a low dissipation factor and minimum self-inductance. These extremely rugged capacitors are carefully designed to live in the demanding world of broadcast and high-voltage industrial application. Their structure is both simple and robust, assuring a long trouble free life. HT Series parts feature a nonconductive, humidity-resistant, coating and a long flashover path. They are built upon a choice ofsix Class I dielectrics, providing a broad range of capacitance and temperature coefficients. Typical applications include transmitters, antennas, induction heating, X-ray, diathermy and welding.
Specification
Temperature Range Operating: -55 °C to +85 °C
Storage: -55 °C to +125 °C
Capacitance Tolerance From ± 2.5 % to ± 20 % and from ±2.5 pF to ±1 pF
Dissipation Factor 0.1 % to 0.5 % Maximum (see Dielectric chart above)
Dielectric Strength Will withstand an AC potential of 1.5 times Rated Working Voltage for 10 Seconds at 25 °C.
Insulation Resistance 10,000 Megohms (MΩ) Minimum
Terminals Silver Plated
Terminal Strength Maximum applied torque to be 20 inch-pounds or less (HT57 & HT59 series), 6 inch-pounds or less (HT50 & HT58 series with standard terminal), 17 inch-pounds or less (HT 50 & HT58 series with solid terminal)
Humidity Protection Nonconductive Coating
Standard Markings “HEC”, Capacitance, Tolerance, Rated Working Voltage (VDC), TC and Date Code
Product number:
SW10315
Manufacturer:
HIGH ENERGY CORPORATION
LC Series Oil-Filled Film Capacitors
1 µF to 10 µF; 10,000 kv to 40,000 kv
DC Filter capacitors
1 to 20 µF capacitance
Voltage 10,000 to 100,000 VDC
Welded cans
Our oil-filled capacitors are aimed at particularly demanding applications such as high-voltage systems, pulsed lasers or induction heating. Select the right component from our portfolio of oil-filled capacitors. We offer a wide range of standard packing components and internal structures that make the capacitors suitable for energy storage, DC filtering, transient snubbing and high alternating current applications. The standard types offered here do not provide the solution to your challenge? We design, manufacture and test customized oil-filled capacitors according to your specifications - please contact us!
Specifications
Capacitance Range 1 to 20 µF
Capacitance Tolerance ± 10% standard, other tolerances available
Operating Temperature -40 °C to +90 °C
Insulation Resistance 25,000 MΩ•µF at 25 °C typical
AC Ripple Voltage The sum of the DC voltage and peak AC ripple should not exceed the capacitor’s VDC rating. Additionally, the AC component should not exceed: 20 % of VDC at 60 Hz, 10 % of VDC at 400Hz, 5 % of VDC at 1 kHz, 1 % of VDC at 10 kHz
Can Construction Welded stainless steel or mild steel with epoxy finish
Dielectric Kraft paper and polypropylene with environmentally compatible impregnant
Product number:
SW10339
Manufacturer:
HIGH ENERGY CORPORATION
PWC Water-cooled Ceramic Capacitors
400 pF to 10,000 pF; 10 kV to 25 kV; 1,000 kVA to 4,000 kVA; Water-cooled
PWC Series Ceramic Capacitors are large water-cooled ‘pot’ style components providing current capacity to 300 Amperes and maximum reactive power ratings up to 4000 kVA. These parts feature a low dissipation factor Class I dielectric combined with superior structural strength coupled with the high thermodynamic efficiency of water-cooling to allow operation at extremely high power levels and high frequency. They are ideal for operation in the tank circuit of high power RF equipment. Popular applications include induction heating, dielectric heating and high-frequency welding equipment.
Specifications
Temperature Range Operating: -55 °C to +85 °C
Storage: -55 °C to +125 °C
Capacitance Tolerance Standard ± 20 %
Optional ± 10 %
Dissipation Factor 0.05 % Maximum
Dielectric Strength Will withstand an AC potential of 1.4 times Rated Working Voltage for 10 Seconds at 25 °C.
Insulation Resistance 10,000 Megohms (MΩ) Minimum
Standard Markings “HEC”, Capacitance, Tolerance, Rated Working Voltage (VDC), Maximum Frequency, Maximum Reactive Power, Maximum Current and Date Code
Product number:
SW10310
Manufacturer:
HIGH ENERGY CORPORATION
SCR Series Oil-Filled Film Capacitors
0.25 µF to 10 µF; 600 kv to 3,000 kv
Snubber & Communication caps
0.25 to 15 µF capacitance
Voltage 600 to 3,000 VDC
Drawn plated steel cans
Our oil-filled capacitors are aimed at particularly demanding applications such as high-voltage systems, pulsed lasers or induction heating. Select the right component from our portfolio of oil-filled capacitors. We offer a wide range of standard packing components and internal structures that make the capacitors suitable for energy storage, DC filtering, transient snubbing and high alternating current applications. The standard types offered here do not provide the solution to your challenge? We design, manufacture and test customized oil-filled capacitors according to your specifications - please contact us!
Specifications
Capacitance Range 0.25 to 15 µF
Capacitance Tolerance ± 10 % standard, other tolerances available
Operating Temperature -40 °C to +90 °C
Insulation Resistance 25,000 MΩ•µF at 25 °C typical
AC Ripple Voltage The sum of the DC voltage and peak AC ripple should not exceed the capacitor’s VDC rating. Additionally, the AC component should not exceed: 20 % of VDC at 60 Hz, 10 % of VDC at 400Hz, 5 % of VDC at 1 kHz, 1 % of VDC at 10 kHz
Can Construction Drawn plated steel cans (welded steel, aluminum or stainless steel available), epoxy paint optional
Dielectric Kraft paper and polypropylene with environmentally compatible impregnant
Product number:
SW10337
Manufacturer:
HIGH ENERGY CORPORATION