OCI-460 ID1550-XS-T LEDs

SMD Surface-Mount Device;SWIR;1650 nm;1500 mA

320 to 2100 nm; Tap Ratio 0.5 to 4%; Insertion Loss <0.05 to 0.3 dB; Return Loss >70 dB; Fiber Type SM, MM, PM, PC, Other; Power Handling 250 to 2000 mW With the OPM series, OZ Optics offers inline optical power monitors and tap couplers based on a revolutionary, patented technology. These taps and monitors provide a way to easily measure the signal intensity through an optical fiber in a simple, miniature package and are ideal for real time monitoring and feedback for optical amplifiers or WDM systems as well as for fiber optic sensors. Traditional monitoring systems typically use fused couplers to tap a fixed amount of light into another fiber that guides the optical power to a photodiode. This method is bulky and must be done using discrete components. In contrast, OZ Optics' OPM series of optical taps direct a controlled amount of light from the fiber core to the cladding surface where it can be directly monitored with high efficiency and very low loss. This inline tapping is accomplished without bending, shaping, or otherwise distorting the fiber. As a result, the tap can be directly incorporated into optical assemblies, without affecting the original functionality. While taps are directional in nature (ideal for monitoring traffic independently of signals travelling back through a network link), bi-directional versions are also available and can be provided on request. OPM taps can be fabricated into standard single mode (SM), polarization maintaining (PM), multi mode (MM), photonic crystal (PC) and other specialty fibers, for any design wavelength and with different tap ratios available upon request. OPM optical power monitors combine the optical tap design with a photodiode in an integrated package and are available in different configurations with Si and InGaAs detectors for different wavelength ranges. The devices produce a current proportional to the optical power within the fiber, and the small size and simple interface makes it very easy to design into optical hardware. Multiple channel power monitors for WDM applications are available upon request. Key Features: Miniaturized Package Inline Integration Without Interruption to the Optical Path Telcordia GR-468 Qualified Available for Any Wavelength from 400 to 2100 nm Low Insertion Loss, Return Loss and Polarization Dependent Loss High Directivity and Large Dynamic Range Broadband Response High Power Handling High Extinction Ratios for PM Versions Remotely and Locally Controllable, USB and RS232 Communication Options Available for Standard Telecom Fibers, PM, MM, Photonics Crystal and Other Speciality Fibers Available with or without Integrated Photodiode Applications: Power Monitoring; Optical Power Control Devices; Channel Balancing for Wavelength Division Multiplexing (WDM) Systems; Dynamic Optical Amplifier Gain Monitoring; FTTH Network Monitoring; Real-time Inline Test and Measurement; Fiber Optic Sensors; OCT Systems

SM Fiber; 1550 nm; 9/125 µm Fiber; FC/APC; 0.25 mm Jacket; 2.5 µm Spot Diameter; 14 µm Working Distance; 2 m Length; 70 mm Stripped Length

Compact Vapor Compression Chillers; Cooling Capacity 450-1000 W @+25°C; Single and Twin Versions; 1 to 5.5 l/min; Temperature Stability ≥±0.05K; Interface USB/Serial, Ethernet AMS Technologies’ mRC-KITs are “mini Recirculating Chiller” development kits for creating particularly compact compressor-based water cooling systems. All mRC-KIT versions feature vapor compression circuits and closed, pressurized recirculating water circuits. On the refrigeration side, miniature rotary compressors as well as customized condensers and evaporators are utilized to reduce the size. The compressor’s BLDC motor is speed controlled by an inverter, eliminating annoying switching noise of hot gas bypass known from ON/OFF compressors. Throughout its speed range, the compressor twin pump design offers low vibration and low noise. Compact centrifugal pumps on the water circuit side also contribute to the compact size Since the water circuit is pressurized, the mRC-KITs manage with very small tanks – without the risk of cavitation in the smoothly operating centrifugal pumps. Overpressure on the cooling system also prevents the ingress of bacteria and oxygen and thus extends the maintenance intervals. While mRC-C-450-24-KIT and mRC-C-450-100/240 feature full chiller power and up to 450 W cooling capacity in a shoe box form factor, DmRC-C-900-100/240-KIT provides two independent water cooling systems in a 19-inch rackmount insert, which can provide a combined maximum cooling capacity of 900 W – either with each circuit cooling two heat loads independently of each other or with both circuits coupled in series, if only one circuit is needed. Our mRC-KITs are available either with a 24 VDC or with a 90 to 264 VAC wide-input-range power supply. The mRC-C-1000-100/240 can also be shipped as a 24V option to target OEM integration applications, that need a cooling capacity of around 1000W and where noise and vibrations are an issue. Automatic fill and drain: Using automatic air and water pump technology integrated into the unit, the cooling water in the tank and pipe system of the mRC-KITs can be easily filled and drained at the push of a button – without the need for time-consuming tilting or removing the unit or the tank from the system and avoiding annoying spills or leaks. mRC Recirculating ChillersIn addition to our mRC-KITs, AMS Technologies provides two recirculating chillers that are CE certified and available from stock. mRC-C-450-100/240 provides up to 500 W cooling capacity, while mRC-C-1000-100/240 features a more powerful compressor, capable of cooling capacities up to 1000 W. Both systems come with an integrated 90 to 264 VAC wide-input-range power supply.  IoT ready: An integrated Ethernet interface allows access to system parameters of the mRC recirculating chillers as well as remote control of the cooling systems via a web browser. Your customized mRC-KIT: For customer requirements that cannot be covered by mRC-C-450-24-KIT, mRC-C-450-100/240 or DmRC-C-900-100/240-KIT, our thermal management specialists at AMS Technologies are happy to develop a completely tailor-made solution and offer all services from development and proof-of-concept all the way to series production. Contact us now to discuss your customized mRC-KIT! Key Features: Recirculating Water Chilling Kits Ideal for Water Cooling Tasks up to 1000 W Cooling Capacity (Twater +25°C, Tambient +35°C) High Cooling Capacity in Compact Format, Easy to be Integrated in Customer Application 24 VDC and 100 to 240 VAC Derivatives Available Temperature Stability: Down to ±0.05 K Flow Rate: 0.5 bar @ 5.5 lpm (standard), 5 bar @ 5 lpm (optional) Smooth, Low-noise Operation with Low Vibration Automatic Fill & Drain PID Parameters and Fan Speed Adjustable Interfaces: USB/Serial, Ethernet (IoT Enabled) Applications: Water Cooling of Lasers and Other Applications; Integration of Water Cooling Capabilities up to 1000 W in Systems with Limited Space