NOA 86 Optical Adhesive 1oz bottle

Refractive Index 1.52; Viscosity at 25°C 900-1500 cps Norland Optical Adhesive 87 is an optically clear one component, solventless, liquid adhesive that will cure when exposed to long wavelength ultraviolet and/or visible light. This adhesive is formulated to meet the Bellcore specification of 85°C/85RH for 2000 hours.NOA 87 is recommended for bonding glass or plastics. This adhesive can be cured by ultraviolet light between 315 and 400 nanometers and visible light between 400 and 420nm. The peak absorption wavelengths are 325, 365 and 400nm. Minor absorption wavelengths are 410, 420nm. Full cure requires 3.5 Joules/cm2 of UV or visible energy.Typical Properties of NOA 87 Color Slight yellow tint that disappears upon curing Modulus of Elasticity (psi) 209,700 Tensile Strength (psi) 4,880 Elongation at Failure 13% Hardness - Shore D 50 Keep NOA 87 in a cool (5-22°C) dark place. If refrigerated, allow the adhesive to come to room temperature before using. 

Refractive Index 1.56; 300 cps Viscosity at 25°C Norland Optical Adhesive 61 is a clear, colorless, liquid photopolymer that will cure when exposed to ultraviolet light. Since it is a one part system and 100% solids, it offers many advantages in bonding where the adhesive can be exposed to U.V. light. The use of NOA 61 eliminates premixing, drying or heat curing operations common to other adhesive systems. Curing time is remarkably fast, and is dependent upon the thickness applied and the amount of ultraviolet light energy available. NOA 61 meets Federal Specification MIL-A-3920 for optical adhesives and is approved for use on all government contracts specifying such adhesives. The adhesive is designed to give the best possible optical bond to glass surfaces, metals, fiberglass and glass filled plastics. NOA 61 is recommended for bonding lenses, prisms and mirrors for military, aerospace and commercial optics as well as for terminating and splicing optical fibers.Typical Properties of NOA 61 Solids 100% Elongation at Failure 38% Modulus of Elasticity (psi) 150,000 Tensile Strength (psi) 3,000 Hardness - Shore D 85 Shelf life of the liquid is at least 4 months from the date of shipment if stored in a cool (50C - 220C), dark place in the original container. If refrigerated, allow the adhesive to come to room temperature prior to use.

Refractive Index 1.55 Viscosity at 25°C 250-350 cps Norland Optical Adhesive 86H is an adhesive that will cure optically clear when exposed to long wavelength ultraviolet or visible light (blue-violet) or heat. The adhesive has low viscosity and meets the Bellcore specifications of 85C/85RH for 2000 hours as well as being USP Class VI biocompatible NOA 86H is recommended for bonding glass or plastic. NOA 86H is cured by ultraviolet light between 315 to 400 nanometers and visible light between 400 to 420 nanometers. The peak absorption wavelengths are 325, 365 and 400 nanometers. Minor absorption wavelengths are 410 and 420 nm. Full cure requires 2.5 Joules/cm 2 .In addition to the UV cure, NOA 86H contains a latent heat catalyst that can quickly cure areas that do not see the ultraviolet light. The catalyst allows the adhesive to cure in 10 minutes at 125°C in a convection oven, or 3 hours at 80° C. Faster cure times are possible with infrared ovens. Areas in contact with air will cure tacky unless exposed to UV light or given the 125° C cure. Temperatures less than 80°C will not activate the adhesive. The advantage of the heat cure is to bring partially cured adhesive to full cure to get the maximum physical properties of the adhesive. The heat cure is not required if all the adhesive receives proper exposure to UV or visible light. Typical Properties of NOA 86H Temperature Range -125°C to 125°C Elongation at Failure 2.8 % Modulus of Elasticity (psi) 360,400 Tensile Strength (psi) 7,834 Hardness - Shore D 75 75 Shelf life of the liquid is a minimum of 6 months from the date of shipment, refer to the package label for the actual expiration date, if stored in a cool (5-22° C), dark place in the original container. If refrigerated, allow the adhesive to come to room temperature prior to use.

Refractive Index 1.56; 250 cps Viscosity at 25°C Norland Optical Adhesive 88 ("NOA 88") is an optically clear, liquid adhesive that will cure when exposed to long wavelength ultraviolet light. The adhesive is a one-part, 100% solids material that offers advantages in optical bonding applications. The use of NOA 88 eliminates premixing, drying, or heat curing operations common to other adhesive systems. Curing time can be regulated by the end user by varying the intensity of the curing source.NOA 88 was formulated as a low outgassing (CVCM) and low Total Mass Loss (TML) adhesive. The ideal applications for this adhesive is for coating of parts destined for space exploration, bonding of high tech computer components,adhering parts in very sensitive instruments and coating sensitive components.NOA 88 is cured by ultraviolet light (315 nm to 395nm) with maximum sensitivity at 365 nanometers. The adhesive requires 5 Joules/sq.cm of energy to fully cure a 25 to 50 micron bond. The material has low oxygen inhibition, so adhesive exposed to air will cure tack-free with sufficient exposure to UV light.Typical Properties of NOA 88 Solids 100% Refractive Index of Monomer 1.52 Elongation at Failure 41% Modulus of Elasticity (psi) 131,000 Tensile Strength (psi) 2,000 Hardness - Shore D 90 Total Mass Loss (TML) 1.07% Collected Volatile Condensable Material (CVCM) <0.01% Dielectric Constant (1 MHz) 4.06 Dielectric Strength (V/mil) 457 Dissipation Factor (1 MHz) 0.0341 Volume Resistivity (ohm-cm) 6.85 x 10 to the 14 power Surface Resistivity (MEgohms) 3.71 x 10 to the 12 power The shelf life of the liquid material is at least four months from the shipment date if kept in a cool (5-22° C) dark place in the original container. If refrigerated, allow the adhesive to come to room temperature prior to use.

Siskiyou offers a wide range of mirror mounts in different styles and price ranges. Economy mounts are a reasonable solution for 2-axis-mirror-alignment.Industrial grade kinematic optic mounts offer exceptional performance with a wide variety of flexible options. Versions for 2 and 3 axis alignment are available. Industrial eXtreme mounts offer the most stability found in the industry. The IXF series monolithic flexure mounts is a new line of mounts that are specifically designed for OEM applications. The IXF series includes versions with for 0.5 up to 1 inch optics size, versions for beam splitter mounting and versions with adjustment from the top side. KEY FEATURES Vacuum compatible versions available on request Colour codes axis for industrial and eXtreme grades One-piece construction for the IXF series IXF series both in spring steel and aluminum versions

Refractive Index 1.51; 3500-5500 cps Viscosity at 25°C Norland Optical Adhesive 76 (NOA 76 10g syringe), also known as NOA 76A, is an optically clear, liquid adhesive that will cure when exposed to long wavelength ultraviolet light. It is also sensitive to visible light between 400 - 450 nanometers which will assist in producing faster cures when curing through UV absorbing materials. This one part, moderate viscosity adhesive is 100% solids and offers advantages in optical bonding applications. The use of NOA 76 eliminates premixing, drying or heat curing operations common to other adhesive systems.NOA 76 is recommended for bonding glass to plastic. The adhesive has best adhesion with plastics such as acrylic, polycarbonate and cellulose acetate butyrate with typical applications being glass to plastic bonding or laminating polarized film between glass.Typical Properties of NOA 76 (76A) Color Clear Modulus (psi) 970 Tensile (psi) 450 Elongation at failure 47% Hardness - Shore D 60 Dielectric Constant at 1 MHz 3.33 Dissipation Factor at 1 MHz .0346 Volume Resistivity (ohm/cm 4.723 x 10 to the 12 power Surface Resistivity (Megohms) 2.148 x 10 to the 12 power Dielectric Strength (volts) 131 The shelf life of NOA 76 liquid material is at least 4 months from the date of shipment if kept in a cool (5-22°C) dark place in the original container. If refrigerated, allow the adhesive to come to room temperature prior to use.

frame: 546filter_code: UL-1002filter_type: Full protectionfilter_colour: Clearfilter_material: Polycarbonatevlt: 0.9alignment_wl: 400-780 nm