NOA 68T Optical Adhesive 1oz bottle

Refractive Index 1.54; 5,000 cps Viscosity at 25°C Norland Optical Adhesive 68 ("NOA68")is a clear, colorless, liquid photopolymer that will cure when exposed to ultraviolet light. Since it is a one part system and 100% solids, it offers many advantages in bonding of optical materials where the bonding surface can be exposed to light. The use of NOA 68 eliminates premixing, drying and heat curing operations common to other optical adhesive systems. Curing time is remarkably fast, and is dependent upon the thickness applied and the amount of ultraviolet light energy available.NOA 68 is designed to give improved adhesion to many plastics such as acrylic, polycarbonate and cellulose acetate butyrate. In addition to plastics, NOA 68 has good adhesion to glass and metals and can be used to bond combinations of the three. Suggested uses for NOA 68 include bonding compound plastic lenses, laminating polarized film between glass or plastic, mounting plastic lenses in metal or plastic mounts and bonding cover glasses.Typical Properties of NOA 65 Solids 100% Elongation at Failure 80% Modulus of Elasticity (psi) 20,000 Tensile Strength (psi) 2,500 Hardness - Shore D 60 Shelf life of the liquid is at least 6 months from the date of shipment if stored in a cool (5-22° C), dark place in the original container. If refrigerated, allow the adhesive to come to room temperature prior to use.

Refractive Index 1.54; 5000 cps Viscosity at 25°C Norland Optical Adhesive 68 ("NOA68")is a clear, colorless, liquid photopolymer that will cure when exposed to ultraviolet light. Since it is a one part system and 100% solids, it offers many advantages in bonding of optical materials where the bonding surface can be exposed to light. The use of NOA 68 eliminates premixing, drying and heat curing operations common to other optical adhesive systems. Curing time is remarkably fast, and is dependent upon the thickness applied and the amount of ultraviolet light energy available.NOA 68 is designed to give improved adhesion to many plastics such as acrylic, polycarbonate and cellulose acetate butyrate. In addition to plastics, NOA 68 has good adhesion to glass and metals and can be used to bond combinations of the three. Suggested uses for NOA 68 include bonding compound plastic lenses, laminating polarized film between glass or plastic, mounting plastic lenses in metal or plastic mounts and bonding cover glasses.Typical Properties of NOA 65 Solids 100% Elongation at Failure 80% Modulus of Elasticity (psi) 20,000 Tensile Strength (psi) 2,500 Hardness - Shore D 60 Shelf life of the liquid is at least 6 months from the date of shipment if stored in a cool (5-22° C), dark place in the original container. If refrigerated, allow the adhesive to come to room temperature prior to use.

Cartridge;OPTIPOP;Consumable

Dispensing Mode Timed, Manual; Dispensing Pressure 30-500 kPa; Dispensing Time 0.001-9,999.999 s; Vacuum Pressure -20-0 kPa Used in the heart of automated production lines, Musashi Engineering’s SuperSigma CMIII V2/V5 series of fully digital controlled air pulse dispenser controllers dominates the field in small-volume, super-fine point dispensing – for example dispensing various optical adhesives in photonics applications. Musashi Engineering‘s SuperSigma CMIII series has been highly valued for its high-precision micro volume dispensing capability and automatized unmanned production lines accompanied with building up overwhelming accomplishments. This series features Musashi Engineering’s “∑3 major functions” that have solved difficult problems all together such as fluid dripping, water head difference, and low fluid alarm: Function 1: Automatic correction of volume reduction – This function eliminates variations in the dispensing volume that are caused by the remaining liquid level. Delivers reliable, high-precision dispensing throughout the entire syringe, significantly improving yield. Function 2: Automatic vacuum correction – The automatic vacuum control system prevents liquid drips and aeration and improves the stability of dispensing accuracy. Function 3: Automatic low fluid alarm – Constantly detects and monitors the remaining fluid level in the syringe with a high level of precision. These functions provide excellent performance, like for example ultra-precision dispensing of as little as 0.01 mg and high-speed dispensing at minimum cycle time of 0.1 s or less, in various production processes including semiconductor manufacturing and electronic component manufacturing. Higher-precision and higher-stability dispensing has been successfully achieved thanks to further improvement in dispensing stability and remaining volume detection accuracy. Storage capacity of as many as 100 types of operation patterns allows users to manage product variety completely without any difficulty. In addition, the dedicated software “MuCOM for Super Sigma CM” provides editability of dispensing conditions on a PC resulting in dramatic improvement in accuracy and efficiency of operations. A broad portfolio of accessories is available for Musashi Engineering’s dispensers, ranging from high-precision, high-quality, highly reliable syringes & accessories to unique nozzles and needles that can handle any type of fluid and dispensing requirements as well as other accessories for dispensers. Key Features: Enhanced Dispensing Stability & Demonstration of Global Standards Communication Function and Automatic Correction Function Excellence in Continuous Dispensing Stability Unified Control of Device From Outside High-precision Time Pressure Dispenser Visualization of Initial Dispensing Conditions Improved Stability in Pressure and Operation Without Compromising the Existing Super Σ CM Functions High-precision Dispenser With Dramatically Improved Dispensing Stability New Feature: Fine Adjustment of Conditions in Σ Corrections Fully Controlled From Device Dispensing Conditions Editable on Your PC Thanks to Dedicated Software Dispensing Modes: Timed, Manual Dispensing Pressure Setting Range: 30 to 500 kPa Dispensing Time Setting Range: 0.001 to 9,999.999 s Vacuum Pressure Setting Range: -20 to 0 kPa Power Supply: 100 to 240 VAC, 50/60 Hz Power Consumption: 30 W Dimensions: 300 x 300 x 100 mm Weight: 5.8 kg CE Marking Certified, EU RoHS Compliant Applications: Small-volume, Super-fine Point Dispensing; Dispensing of Optical Adhesives, Solders, Other Fluids; Semiconductor Manufacturing; Electronic Component Manufacturing

Refractive Index 1.51; 3500-5500 cps Viscosity at 25°C Norland Optical Adhesive 76 (NOA 76 10g syringe), also known as NOA 76A, is an optically clear, liquid adhesive that will cure when exposed to long wavelength ultraviolet light. It is also sensitive to visible light between 400 - 450 nanometers which will assist in producing faster cures when curing through UV absorbing materials. This one part, moderate viscosity adhesive is 100% solids and offers advantages in optical bonding applications. The use of NOA 76 eliminates premixing, drying or heat curing operations common to other adhesive systems.NOA 76 is recommended for bonding glass to plastic. The adhesive has best adhesion with plastics such as acrylic, polycarbonate and cellulose acetate butyrate with typical applications being glass to plastic bonding or laminating polarized film between glass.Typical Properties of NOA 76 (76A) Color Clear Modulus (psi) 970 Tensile (psi) 450 Elongation at failure 47% Hardness - Shore D 60 Dielectric Constant at 1 MHz 3.33 Dissipation Factor at 1 MHz .0346 Volume Resistivity (ohm/cm 4.723 x 10 to the 12 power Surface Resistivity (Megohms) 2.148 x 10 to the 12 power Dielectric Strength (volts) 131 The shelf life of NOA 76 liquid material is at least 4 months from the date of shipment if kept in a cool (5-22°C) dark place in the original container. If refrigerated, allow the adhesive to come to room temperature prior to use.