FUSED-12-IRVIS-100/140-95/5-3A3A3A-1-1 Fiber WDM/ Combiners / Splitters and Couplers

4-32 Channels; Power Handling ≤2 W; Fiber Type SM, MM, PM; 350-2050 nm; Connector Type NTT-FC/PC, ST, SC, SCA, LC/PC, Other; Attenuation ≤60 dB OZ Optics offers compact and rugged multichannel digital attenuators with high resolution, high attenuation range, and high power handling (blocking technique only). OZ Optics’ MCDD-100 rackmount digital multichannel attenuators are 19” 3U rack modules. These attenuators have low insertion loss, low backreflection, low PDL and flat wavelength response. They can be calibrated for up to four wavelengths for each attenuator, for C or L bands. Alternatively, the unit can be calibrated for a continuous range. By using interpolation between the calibration wavelengths, the unit is capable of providing accurate attenuation levels over a continuous, broad range of wavelengths. OZ Optics’ MCDD-100 multichannel attenuators are ideal for use in bit error rate testing, troubleshooting receivers and other active fiber optic components, power meter linearity checks, simulating long distance fiber transmission, and power setting. A computer interface allows users to access or remotely control the unit through a PC. The built-in power meter and power stabilization function lets you set and maintain the output power stability even when the input power fluctuates. You will get reliable and repeatable test results, each and every time. OZ Optics provides attenuators that use either single mode (SM), multi mode (MM) or polarization maintaining (PM) fiber. In general, OZ Optics uses polarization maintaining fibers based on the PANDA fiber structure when building polarization maintaining components and patch cords. However, OZ Optics can construct devices using other PM fiber structures. OZ Optics carries some alternative fiber types in stock, so please contact AMS Technologies our for availability. If necessary, OZ Optics is willing to use customer supplied fibers to build devices. Key Features: 4 to 32 Channels High Power Handling: Up to 2 W Wide Attenuation Range: Up to 60 dB Low Polarization Dependent Loss (PDL): ≤0.05 dB Typ., ≤0.01 dB Min. Low Wavelength Dependency of Attenuation: ≤0.3 dB (1300 nm to 1550 nm), ≤0.1 dB (1520 nm to 1570 nm) Low Insertion Loss (IL): 1.0 dB, 2.0 dB Typ., 2.0 dB, 4.0 dB Max. Low Back Reflection: Return Loss (IL): 35 dB to 60 dB High Attenuation Resolution: 0.01 dB Rugged and Compact Design Calibrated for Dual Wavelengths (1300 nm to 1550 nm) or Calibrated for C and L Bands. Can Also Be Calibrated for up to Four Individual Wavelengths Wide Wavelength Range: 350 nm to 2050 nm Wide Range of Receptacles Blocking Technique for Single Mode (SM) and Polarization Maintaining (PM), Neutral Density Filter Technique for Multi Mode (MM) Fiber Applications Computer Interface: USB as Standard Your Choice of up to 32 Attenuators per Unit Choose Between Broad and Narrow Wavelength Optional Integrated Power Monitoring for Precise Output Power Control Speed 100 ms Repeatability of Attenuation Setting: ±0.03 dB to ±0.3 dB Accuracy: ±0.03 dB to ±1.0 dB Polarization Extinction Ratio (PER) for PM Fiber: 20 dB, 25 dB, 30 dB Dimensions: 48.26 x 13.33 x 50.8 cm Weight: 15 kg + 0.25 kg/Channel) Applications: Bit Error Rate (BER) Testing; Trouble Shooting Receivers and Other Active Fiber Optic Components; Simulating Long-distance Fiber Transmission; Design of Fiber Optic Transmitter/Receiver Circuitry; Power Meter Linearity Checks; Power Setting

1100-1600 nm; Responsivity 0.8 A/W; Capacitance 0.25 pF; Dark Current 0.1 nA; Package 3-pin TO 46, 6-pin TO-8, 10-pin Mini-Flat Wooriro’s SPAD series (Single Photon Avalanche Diode) comprises InGaAs/InP APD devices specially designed and fabricated for the use of single photon avalanche detection (SPAD) with internal or external cooling systems. SPAD avalanche photodiodes (APDs) can be operated at the voltage above breakdown for short periods, this mode of operation is called “Geiger mode” or “Gated mode” operation. Ultra-low noise operation is possible at a case temperature of -40 °C. The devices can be used for quantum key distribution (QKD) receivers. SPAD devices are available without an integrated thermoelectric cooling device (TEC) in a 3-pin TO-46 package or with integrated TEC in a 6-pin TO-8 package as well as in a butterfly-style 10-pin Mini-Flat package. Key Features: Low Capacitance: <0.3 pF High Speed Optical Wavelength Range: 1100 nm to 1600 nm Coaxial Type Pigtail Low Noise Breakdown Voltage VBR: 50 V to 90 V (ID = 100 µA) Total Dark Current: 0.1 nA Typ. Capacitance: 0.25 pF Typ. Quantum Efficiency: 70% Typ. Responsivity: 0.8 A/W Typ. (1550 nm, M=1) Cooling System: External or Built-in 3-stage TEC Temperature Coefficient of VBR: 0.11 V/°C Typ. Max. AfterPulse Probability: 10% Dark Count Rate: 2.0 kHz (Standard), 0.5 kHz (Premium Grade) (10 MHz Gate Frequency, 2 ns Gate Pulse, 20% PDE) Detection Efficiency (PDE): 20% Typ. (10 MHz Gate Frequency, 2 ns Gate Pulse) Package: 3-pin TO 46, 6-pin TO-8, 10-pin Butterfly-Type Mini-Flat Applications: Special Applications Requiring Single Photon Counting such as QKD , OTDR, etc.

Planar Lightwave Circuit;1x4;25 %;1550 nm;Polarization Maintaining

Latching; 1x1, 2x1, 2x2; Fiber Type SM, MM; 600 to 1700 nm; Insertion Loss 1.0 dB; Crosstalk 60 dB; Switching Time 2 to 10 ms Sercalo Microstechnology’s SXLA series are latching type fiber optic MEMS switches for telecom and test and measurement applications. The single mode SXLA series achieves excellent repeatability and reliability and meets Telcordia 1221 quality standards. The SXLA series are miniature opto-mechanical switches for fiber optic communication systems and submodules, available in latching variants, with 1x1, 2x1, 2x2 configurations. The SXLA series offers smallest size, ease of integration and the established reliability of Sercalo Microtechnology’s MEMS components. The package is one of the smallest in the industry. It is optimized for low cost production while maintaining high reliability. In the SXLA switches, the optical switching function is realised by a silicon MEMS chip, on which a mirror can be moved in and out of the optical path by electrostatic actuation. The miniature SXLA series is available as latching variant where a bistable suspension mechanism keeps the last selected state in power off. The non-latching type (i.e. SXNA) is not recommended for new designs. To operate the switch, 5 V and 0 V are applied on pins 1 and 2, which are used by the internal DC/DC converter to supply a high voltage for the actuator control. CMOS or TTL logic levels on pins 3 to 4 control the electrostatic actuator. To set the switch state, pin 3 respectively pin 4 are set to logic high (5 V) for 20 ms and the corresponding switch state is selected. At rest pins 3 and 4 should be pulled to 0 V and must not be floating. Key Features: Miniature Size: 23 x 10 x 6 mm TTL or CMOS Logic Latching 2x2, 2x1, 1x1 Variants Single Mode (SM) or Multi Mode (MM) Fiber Wavelength Range: 600 to 1700 nm Insertion Loss (IL): 1.0 dB Response Time: 2 to 10 ms Crosstalk: 60 dB Applications: Protection Switching; Reconfiguration; Optical Subsystems; Array Integration