FD805010405 Receptacle Style Collimator

1300 to 1620 nm; Connector Type Ultra FC, SC, ST, LC; Backreflection >50 dB; Power Handling ≤1W; Fiber Type Single Mode 9/125 OZ Optics' TER series of fiber optic terminators are recommended for any fiber optic system with unused ports. Non-terminated ports may create unwanted backreflections that can degrade overall system performance. These terminators can be easily installed into panel mount receptacles to significantly reduce reflections from the fiber face. Terminators are available for FC, SC, LC and ST style connectors with Ultra polish grade. Key Features: Low Backreflection Compact Size High Reliability Low Cost Applications: Fiber Optic Telecommunications; Fiber Amplifiers; CATV Systems; Optical Network Equipment

532 nm; 0.32 mrad; 2.13 mm; Lens EFL 11.0 mm; Lens NA 0.25; FC/APC; M11x0.5-6g ThreadThe Zemax file of the precision molded aspheric lens built into this collimator can be downloaded here: file. Do you need a customised collimator? Click here to contact us. All products supplied by GH Optics are RoHS compliant and meet the requirements of the current EU RoHS Directive 2011/65/EU. The RoHS certificate can be provided on request.

Plug, Receptacle & Loopback Types; 440 to 1625 nm; Attenuation 1 to 25 dB; Return Loss 50, 60 dB; Power Handling 50, 500 mW OZ Optics’ FA-300/400/500 line of low cost fixed attenuators are available in different configurations like hybrid male to female, bulkhead receptacle and loopback to best suit your particular application. Each configuration has its own strengths. The hybrid type is ideal for reducing the intensity of a signal just prior to going into a receiver. They are also available with different connector types on the input and output. The receptacle style is ideal when two male connectors need to be mated with a fixed attenuator. Finally, the loopback style attenuator is intended for patch panel installations. With its own technology to precisely attenuate signals in fibers, OZ Optics can create fixed attenuators within any standard fiber, with low polarization dependent loss (PDL) and high power handling. The resultant attenuating fiber is physically identical in appearance and behaviour to the original fiber, allowing it to be used to build male-female hybrid attenuators. Attenuating fiber can be made from either single mode and polarization maintaining (PM) fiber. PM attenuating fiber maintains polarization to better than 25 dB. Multimode fiber attenuators can also be made this way, provided the light travelling through the fiber is incoherent and uniformly excites the fiber modes. OZ Optics’ single mode plug type attenuators use attenuating fibers that are specially doped to reduce the intensity of the light. The fibers also feature a double cladding, with an absorbing dopant in the inner cladding layer, effectively suppressing light scattering into the cladding. Thus, the readings will not significantly depend on the application. This is a key advantage of the OZ Optics single mode hybrid style fixed attenuator (Note: Multi mode plug style attenuators do show cladding modes). These attenuators have been tested in accordance with Telcordia standards. Hybrid male-female attenuators are available with between 0.5 to 20 dB attenuation, in 0.1 dB increments. Higher attenuation levels and higher resolution attenuation steps are possible. Attenuators can be made for operating wavelengths from 488 nm to 1650 nm. Prototype and custom designs can be made quickly and in small volumes economically.Bulkhead receptacle style fixed attenuators also use attenuated doped fiber and are available in female to female configurations for FC, SC and ST types. Finally, OZ Optics multimode loopback attenuators use a special attenuating filter inside. This provides uniform attenuation, regardless of the source being used. Many other loopback style fixed attenuators on the market use a high loss splice to attenuate the light. In multimode fibers this method is not recommended because the attenuation of the splice will greatly depend on the launch conditions from the source. OZ Optics’ loopback style attenuators avoid this problem. Key Features: Low Backreflection Wide Wavelength Range Polarization Insensitive Compact and Rugged Housings Wide Range of Connectors/Receptacles Hybrid Style Attenuator Uses Attenuating Fiber Mode Independent Multi Mode Loopback Attenuators Designed to Meet Telcordia Requirements Applications: Optical Power Equalization; CATV, LAN and Telecommunications; Test and Measurement; Channel Balancing for WDM Systems; Receiver Padding; Optical Transmission Systems

633 nm; 0.50 mrad; 1.61 mm; Lens EFL 8.0 mm; Lens NA 0.50; FC/APC; M12x0.5-6g ThreadThe Zemax file of the precision molded aspheric lens built into this collimator can be downloaded here: file. Do you need a customised collimator? Click here to contact us. All products supplied by GH Optics are RoHS compliant and meet the requirements of the current EU RoHS Directive 2011/65/EU. The RoHS certificate can be provided on request.

6.0 µF to 1400 µF; 750 kv to 1250 kv; 300 kVA to 1600 kVA High capacitance at high power 6 to 1,400 µF capacitance 800 to 1,250 VRMS 240 to 2,000 ARMS 300 to 2,000 kVA Up to 25 kHz These oil-filled, water-cooled capacitors are aimed at particularly demanding applications such as high-voltage systems, pulsed lasers or induction heating. Select the right component from our portfolio of oil-filled capacitors. We offer a wide range of standard packing components and internal structures that make the capacitors suitable for energy storage, DC filtering, transient snubbing and high alternating current applications. The standard types offered here do not provide the solution to your challenge? We design, manufacture and test customized oil-filled capacitors according to your specifications - please contact us!

Pigtail Style; 375 to 2050 nm; Laser Diode Power 5 to 150 mW; Coupling Efficiency 25% to 55%; Fiber Type SM, MM or PM OZ Optics’ LDPC series of pigtail style laser diode to fiber couplers is offering optimum coupling in a small, rugged package. The couplers may be purchased prealigned, with the diode already in place, or as a kit that can be assembled by the customer using their own diode. The complete assembly procedure is quite straightforward and can be done in less than twenty minutes. A complete alignment kit, which includes tools and video instructions, is available separately. Laser diode source couplers are available for a variety of diode case sizes, and for diode wavelengths from 375 nm to greater than 2050 nm. These source couplers work with MM, SM and PM fiber. Pigtail style laser diode to fiber couplers provide higher coupling efficiencies and lower backreflection levels than receptacle style couplers, as well as better stability. The output fiber can be terminated with different output connectors, as desired. Laser diode to fiber couplers are available in different diameters from 0.5 inch to 1.3 inch. These tilt adjustable source couplers can be used over a temperature range of -25 °C to +60 °C and have been vibration tested. Higher temperature versions are available on request.OZ Optics also offers special, low cost, miniature pigtail style laser diode to fiber couplers for OEM applications. These packages use just a single lens to couple light from the laser diode into the fiber. They do not use OZ Optics tilt adjustment technique. This package features a compact, rugged housing, at a significantly lower cost. A variety of options like a built-in isolator, a blocking screw to attenuate the output beam as well as polarizers or polarization rotators in the middle are also available. Key Features: 375nm to 2050nm Variety of Standard Packaging Options SM, MM or PM fibe Rugged Design Applications: Fiber Optic Communications; Optical Alignment Systems; Process Control; Optical Sensors; Medical Apparatus; Imaging Systems ; Test and Measurement Systems; OCT Systems