Skip to main content

CP10G20 Aluminum Cold Plate with 4-Pass Stainless Steel tube, straight fittings

Product information "CP10G20 Aluminum Cold Plate with 4-Pass Stainless Steel tube, straight fittings"

304.8 mm X 88.9 mm, 0.008 °C/W, tubed cold plate.
The CP10™ 4-pass is a cost-effective, single-sided aluminum cold plate available with either copper or stainless steel tubes. It is ideal for component cooling applications where the heat load is low-to-moderate. Our range of standard tubed cold plates provide cost-effective thermal solutions for component cooling applications where the heat load is low-to-moderate. These tubed cold plates consist of copper or stainless steel tubes pressed into a channeled aluminum extrusion. This “Press-Lock” technology eliminates the need for performance-limiting epoxy between the tube and the plate, resulting in superior thermal performance. Each tubed cold plate has a single tube with no joint, ensuring leak-free operation.

Manufacturer "Lytron-Aavid-Boyd"
Related links of the manufacturer

Similar products

CP10/CP12/CP15 Tubed Cold Plates
Press-Lock Technology; Thermal Performance 0.004 to 0.059 °C/W; Max. Pressure 10 bar; Max. Flow Rate 4, 8 l/min; Straight Fittings Lytron’s CP10/CP12/CP15 series of standard tubed cold plates provide cost-effective thermal solutions for component cooling applications where the heat load is low-to-moderate. These tubed cold plates consist of copper or stainless steel tubes pressed into a channeled aluminum extrusion. The CP10/CP12/CP15 series of tubed cold plates is manufactured using Lytron’s proprietary Press-Lock technology, which mechanically locks the tubes into the aluminum plate. Press-Lock technology eliminates the need for performance-limiting epoxy between the tube and the plate, resulting in superior thermal performance. Compared to similar tubed cold plates, the CP12 cold plate offers 30% better performance and the CP15 offers 40% to 50% better performance. Copper tubes are compatible with water and most other common coolants, while stainless steel tubes (CP10 only) can be used with deionized water or corrosive fluids. Each tubed cold plate has a single tube with no joint, ensuring leak-free operation. The tubes of the CP12 and CP15 cold plates are coplanar with the plate to allow for dual-sided mounting. The cold plate's tube side offers higher performance as the copper tubes are in direct contact with the component being cooled. CP10 models are available with 9.5 mm copper and stainless steel tubes in 2-pass or 4-pass configuration for single-sided mounting. CP12 models are available with 9.5 mm copper tubes in 4-pass configuration for dual-sided mounting. CP15 models are available with 6.4 mm copper tubes in 6-pass configuration for dual-sided mounting. If you can’t find a tubed cold plate that meets your requirements, please get in touch with the AMS Technologies thermal technology experts to discuss your customized solution! Key Features: Thermal Performance: 0.004 to 0.059 °C/W @ 7.6 l/min (3.8 l/min for CP15) Fluid Compatibility: Water, Common Coolants (Copper Tubes); Deionized Water, Corrosive Fluids (Stainless Steel Tubes) Configuration: 2-pass (CP 10), 4-pass (CP10, CP12), 6-pass (CP15) Mounting Surface: Single Sided (CP 10), Double Sided (CP12, CP15) Tube Diameter: 9.5 mm (CP10, CP12), 6.4 mm (CP15) Fitting: Straight Plate Material: Aluminium Maximum Pressure: 10 bar Maximum Flow Rate: 8 l/min, 4 l/min (CP 15) Applications: Component Cooling Where the Heat Load is Low-to-moderate
Product number: SW10851
Manufacturer:

CP10G01 Aluminum Cold Plate with 2-Pass Copper tube, straight fittings
152.4 mm X 88.9 mm, 0.059 °C/W, tubed cold plate.The CP10™ 2-pass is a cost-effective, single-sided aluminum cold plate available with either copper or stainless steel tubes. It is ideal for component cooling applications where the heat load is low-to-moderate. Our range of standard tubed cold plates provide cost-effective thermal solutions for component cooling applications where the heat load is low-to-moderate. These tubed cold plates consist of copper or stainless steel tubes pressed into a channeled aluminum extrusion. This “Press-Lock” technology eliminates the need for performance-limiting epoxy between the tube and the plate, resulting in superior thermal performance. Each tubed cold plate has a single tube with no joint, ensuring leak-free operation.
Product number: C008680-6
Manufacturer:

Only 1 available
CP10G02 Aluminum Cold Plate with 2-Pass Copper tube, beaded fittings
Aluminum Cold Plate 6"x3,5", 15.24 cm x 8.89 cm with 2-Pass 3/8" Copper tube, beaded fittings
Product number: C019393-6
Manufacturer:

CP10G03 Aluminum Cold Plate with 2-Pass Stainless Steel tube, straight fittings
152.4 mm X 88.9 mm, 0.059 °C/W, tubed cold plate.The CP10™ 2-pass is a cost-effective, single-sided aluminum cold plate available with either copper or stainless steel tubes. It is ideal for component cooling applications where the heat load is low-to-moderate. Our range of standard tubed cold plates provide cost-effective thermal solutions for component cooling applications where the heat load is low-to-moderate. These tubed cold plates consist of copper or stainless steel tubes pressed into a channeled aluminum extrusion. This “Press-Lock” technology eliminates the need for performance-limiting epoxy between the tube and the plate, resulting in superior thermal performance. Each tubed cold plate has a single tube with no joint, ensuring leak-free operation.
Product number: C008686-6
Manufacturer:

CP10G04 Aluminum Cold Plate with 2-Pass Stainless Steel tube, beaded fittings
Aluminum Cold Plate 6"x3,5", 15.24 cm x 8.89 cm with 2-Pass 3/8" Stainless Steel tube, beaded fittings
Product number: C012834-6
Manufacturer:

CP10G05 Aluminum Cold Plate with 2-Pass Copper tube, straight fittings
304.8 mm X 88.9 mm, 0.029 °C/W, Tubed Cold Plate.The CP10™ 2-pass is a cost-effective, single-sided aluminum cold plate available with either copper or stainless steel tubes. It is ideal for component cooling applications where the heat load is low-to-moderate. Our range of standard tubed cold plates provide cost-effective thermal solutions for component cooling applications where the heat load is low-to-moderate. These tubed cold plates consist of copper or stainless steel tubes pressed into a channeled aluminum extrusion. This “Press-Lock” technology eliminates the need for performance-limiting epoxy between the tube and the plate, resulting in superior thermal performance. Each tubed cold plate has a single tube with no joint, ensuring leak-free operation.
Product number: C008701-6
Manufacturer:

CP10G06 Aluminum Cold Plate with 2-Pass Copper tube, beaded fittings
Aluminum Cold Plate 12"x3.5", 30.48 cm x 8.89 cm with 2-Pass Copper tube, beaded fittings
Product number: C008704-0
Manufacturer:

Customers also viewed

Precision Molded Infrared Aspheric Lenses
Focal Length 0.91-5.95 mm; Numerical Aperture 0.56-0.86; Design Wavelength 4-9,5 µm; Outer Lens Diameter 3.000-8.000 mm; Working Distance 0.66-5.00 mm GH Optics’ series of infrared lenses are aspheric optics, precision molded in IR glass, designed for use in the short-wave, mid-wave, and long-wave infrared (SWIR, MWIR, LWIR) bands. Typical applications are collimating or focusing (laser) beams, but also coupling quantum cascade lasers (QCL). With their large numerical apertures, these precision molded infrared aspheric lenses provide optimum collection of light for infrared lasers (short wave (SWIR), mid wave (MWIR) and long wave (LWIR) types), as well as quantum cascade lasers (QCL). Two types of chalcogenide glass are available: GH6, made from As40Se60 material, is most popular and widely used. This material is comparable to infrared glass of other leading brands in the market, features high transmission, is Ge free and RoHS compliant and can be molded, grinded and polished. GH2, made from Ge28Sb12Se60 material, is especially suitable for collimating lenses, gas testing and coupling of quantum cascade lasers (QCL). This material also is comparable to infrared glass of other leading brands in the market, featuring high transmission and RoHS compliance. Lenses made from this material can be molded, grinded and polished and are suitable for high-temperature applications. Lens Series Glass Type Glass Material Refractive Index @10 µm Abbe Number @10 µm CTE dn/dT RoHS Compliance L2 GH2 Ge28Sb12Se60 26.044 93.63 142×10-7/°C 70.4×10-6/°C yes L6 GH6 As40Se60 27.775 137.71 209×10-7/°C 31.3×10-6/°C yes   Our series of molded infrared aspheric lenses can be coated with a range of AR (anti reflection) coatings, including two standard AR coatings (RA, RB) featuring average reflectance values of <1.0% or even <0.5% for wavelength ranges of 3 µm to 5 µm or 8 µm to 12 µm respectively. Other customized coatings like HD (High Density) or SWB (Short Wave Blocking) are available on request.  Lens Code Outer Diameter (OD) Effective Focal Length (EFL) Numerical Aperture (NA) Clear Aperture (CA) Working Distance (WD) Design Wavelength (DW) L20990 3.000 mm 0.91 mm 0.86 2.50 mm 0.66 mm 4.2 µm L21990 5.500 mm 1.87 mm 0.85 4.00 mm 0.72 mm 9.5 µm L23070 6.500 mm 3.00 mm 0.71 5.00 mm 2.35 mm 8 µm L24060 6.500 mm 4.00 mm 0.56 5.00 mm 3.05 mm 4.0 µm L26060 8.000 mm 5.95 mm 0.56 7.60 mm 5.00 mm 4 µm   Key Features: GH6 or GH2 Chalcogenide Glass Diffraction Limited Precision Molding Effective Focal Length: 0.91 mm to 5.95 mm Numerical Aperture: 0.56 to 0.86 Design Wavelength: 4 µm to 9,5 µm Outer Lens Diameter: 3.000 mm to 8.000 mm Working Distance: 0.66 mm to 5.00 mm Applications: Collimating Lenses; Focusing; Gas Testing; Coupling of Quantum Cascade Lasers (QCL); High-Temperature Applications; And Many More    
Product number: SW11896
Manufacturer: