CM96x Pump Laser Modules

Product number: SW11378

Manufacturer: Coherent (former II-VII)

Downloads

CM96x Pump Laser Modules II-VI Incorporated Datasheets

Product information "CM96x Pump Laser Modules"

Single Chip; 973-977 nm; Spectral Width 0.2 nm; Max. Output Power 0.18-0.6 W; 10-pin Mini Butterfly Package; Threshold Current 50-60 mA

Within the CM96x series, II-VI Incorporated offers a variety of single-chip pump laser modules addressing all areas of low-noise all-optical amplification and power consumption requirements.

Increasingly, network providers are concerned with component density and power consumption which translates into cost of installation and cost of ownership of a network. To address this, II-VI Incorporated offers a suite of 980 nm pump lasers from uncooled, semi-cooled and traditional-cooled pumps over a set of market leading power ranges.

CM96x series pump laser modules are designed as pump sources for erbium-doped fiber amplifier (EDFA) applications. Processes and techniques of coupling the fiber to the laser allow high output powers that are very stable with both time and temperature. The CM96x series uses a 10-pin mini-butterfly (mBTF) package with mounting holes for ease of integration and thermal management, enabling smaller form factor designs. The 10-pin mBTF package is backward compatible with 14pin BTF package footprint and pinout.

CM96Z***-7* TEC-cooled, 10-pin butterfly, 980 nm pump laser modules utilize a fiber Bragg grating design for enhanced wavelength and power stability performance. This product has been designed to ensure superior wavelength locking over drive current, temperature and optical feedback changes. CM96Z***-7* devices are available with kink-free output powers to 600 mW.

CML96Z***-7* is the low power consumption version of CM96Z***-7*. These pump modules operate at significantly reduced TEC and overall power consumption. CML96Z***-7* devices are also available with kink-free output powers to 600 mW.

The UM96Z***-7* high power, extended temperature, uncooled, 980 nm pump laser are II-VI Incorporated’s third-generation uncooled pump modules providing higher powers and lower consumption. These lasers enable designers to create reliable SFF single- and multi-channel, high-bit-rate per-channel amplification as well as replace traditional cooled pumps in high-power EDFA applications with reduced power consumption. The UM96Z-series is designed for uncooled operation at high temperature and power levels. Qualification of the enhanced G08 chip ensures high reliability even at 460 mW operating power and +75 °C. External fiber Bragg grating (FBG) stabilization provides excellent wavelength and power stability over the entire operating temperature range.

Key Features:

High Output Power: up to 600 mW Kink-free
Low Power Consumption/Dissipation (CML96Z***-7*, UM96Z***-7*)
Single Mode (SM) Fiber Pigtail, Polarization Maintaining (PM) Fiber (UM96Z***-7*)
Fiber Bragg Grating (FBG) Stabilization for Wavelength Locking Over the Entire Operating Conditions
Small Form Factor: Hermetically Sealed 10-pin Mini-Butterfly Package
Pin-out Compatibility With 14-pin Butterfly Package
Operating Wavelength: 973 to 977 nm
Spectral Width: 0.2 nm Typical
Threshold Current: 50, 55, 60 mA Typical
Operating Forward Voltage: 1.7, 1.85 V Typical
Maximum Operating Current: 375 to 1,000 mA
Return Loss (RL): >35 dB
Internal Thermoelectric Heatpump and Monitor Photodiode (CM96Z***-7*, CML96Z***-7*)
Telcordia GR-468-CORE Compliant
Field-proven High Reliability
RoHS Compliant

Applications: Low-noise EDFAs; Single- or Multi-stage EDFA Applications Including Single-channel and Dense Wavelength Division Multiplexing (DWDM) Designs; CATV Applications

Manufacturer "Coherent (former II-VII)"

Coherent Corp. is a global leader in materials, networking, and lasers for the industrial, communications, electronics, and instrumentation markets. Headquartered in Saxonburg, Pennsylvania, the company employs approximately 26,157 people worldwide and has a market capitalization of $17.574B. Coherent designs, manufactures, and markets a diverse portfolio of products including lasers, optical components, compound semiconductors, and precision optics. The company was formed through the merger of II-VI Incorporated and Coherent, Inc. in July 2022, creating one of the largest photonics and laser technology companies globally. Their product portfolio includes high-power industrial lasers, optical communications components, silicon carbide substrates for power electronics, 3D sensing technology, and advanced materials for semiconductor manufacturing. Key products include the HighLight FL fiber lasers for industrial cutting and welding, Monaco ultrafast lasers for precision micromachining, and silicon carbide (SiC) substrates used in electric vehicles and renewable energy applications. The company operates manufacturing facilities across North America, Europe, and Asia, serving a diverse global customer base across multiple industries.

Customers also viewed

3P/4P-GPS-X General Purpose Integrating Spheres & Kits

Size 25.4-152.4 mm; Reflectance Material Spectralon®, Spectraflect®, Infragold®; No. of Ports 3, 4; Port Diameter 6.35-63.5 mm; Detector Assemblies Si, Ge, InGaAsLabsphere’s 3P/4P-GPS-X series of general-purpose integrating spheres with 3 ports or 4 ports respectively provides a broad range of different models, suitable for various requirements. Choose your sphere by selecting size, ports, and reflectance material/coatings. The addition of a wide range of interchangeable accessories including light sources, assemblies, port reducers and more allows for an endless number of application solutions.This flexibility allows you to create your own uniform source or light measurement system or modify an existing system in a matter of minutes. A variety of system calibration options enable systems to be customized for application specific tasks.Labsphere’s integrating sphere design features sturdy port frames, easy access mounting options, and quick-change accessory options meeting a multiple of requirements. Labsphere’s dedicated Calibration Lab provides calibration options to ensure your system is customized to meet specific application requirements. As you change components, simply click on the system software to recalibrate.Spheres are offered with Spectraflect®, Spectralon® or Infragold® coating which combines a highly reflective surface with nearly perfect Lambertian reflectance. Both durable and highly stable over time, these coatings ensure optimal integration of light over the lifetime of your sphere.All of Labsphere’s products are created in an ISO 9001 registered environment and provide NIST traceable results upon calibration. Once the configuration has been selected, AMS Technologies qualified engineering and support experts are available to help you with your specific application needs.For quick and easy start-up, Labsphere’s 3P/4P-GPS-X series general purpose starter kits are conveniently packaged with the supplier’s most common port accessories, adaptors, and integrating sphere mounting components to help you get started.For specifications about Labsphere’s 3P/4P-GPS-X series of general-purpose integrating spheres and kits, please download the datasheet.Key Features:Sizes: Miniature 25.4-51.2 mm (Cube Style), Standard 76.2-152.4 mmReflectance Materials: Spectralon®, Spectraflect® Coating, Infragold® CoatingNumber of Ports: 3 (2 ports on the sphere’s equator at 0° and 90°, 1 port at the top), 4 (an additional port opposite the 0° port)Port Diameter: 6.35-63.5 mmBaffle mounted between the 0° and the 90° portOptional Light Sources: Internal Halogen (5-100 W), Ecternal Halogen (Dichroic 30-120 W, Rhodium 40-100 W)Available Detector Assemblies: Silicon, Germanium; Indium-Gallium-Arsenide InGaAsAccessories: Illuminator or Detector Assemblies, Port Reducers, Port Plugs, Filters, and more…Calibration Options: Total Spectral Flux Calibration, Radiance Calibration, Exit Port Uniformity Mapping, and more…Applications: Light Measurement; Remote Sensing; Image Sensor Test; Researching and Prototyping; Building Your Own SystemsPlease note that Labsphere products are available from us only in Denmark, Finland, Iceland, Italy, Norway, and Sweden.

Product number: SW11627

Manufacturer:

ClearCurve Mid-Temperature MM Fibers

850, 1060, 1300 nm; Core Dia. 50 µm; Cladding Dia. 125 µm; Acrylate Coating; Optional Hermetic Layer; -60 to +180 °C Equipped with mid-temperature acrylate-based coatings, the Corning® ClearCurve® series of multi mode (MM) bend insensitive optical fibers now includes higher temperature and higher bandwidth capability. For use at temperatures up to +180 °C and beyond, these acrylate-based fibers deliver incredible macro bend performance with ease of use and handling – benefiting sensing systems operating in harsh environments.. The ClearCurve multi mode fiber series includes the MM50BI-XMT fiber with mid-temperature acrylate coating as well as the MM50BIH-XMT fiber with mid-temperature acrylate coating and an additional hermetic layer. For mid-temperature single mode fibers please refer to Corning’s ClearCurve single mode fiber series. Key Features: Acrylate-base for Ease of Handling Rated for up to +180 °C Test data available at +200 °C Higher Bandwidths available Hermetic Coating (Optional) for Protection Against Hydrogren-induced Attenuation Increase and Improved Fatigue Resistance Consistent Strength Over Time at Elevated Temperatures Designed to Meet Your Specific Needs: Recommended Min. Bending Radius of 7.5 mm Fully Compliant With ITU-Recommendations G651.1 Compatible with Current Optical Fibers and Practices Applications: Fiber Sensing and Data Transmission with Tight Bend Requirements and/or High Bandwidth Requirements for: Aerospace & Defense, Structural Health Monitoring, Down-Hole Drilling

Product number: SW11002

Manufacturer: