Adapter Tube 5cc for Pneumatic dispenser

One touch connecting! Excellence in liquid stable dispensing with high level of airtightness! This tube is used to carry the compressed air from the dispenser housing to the syringe.  Adapter material: Polyacetal (AT-100E: Made of Aluminium)  Tube material: Vinyl chloride (for S series dispensers: Polyurethane) O-ring material: fluororubber (nitrile rubber for 1mL type)

5cc Syringe clear, threaded, for use with pneumatic dispenser

5cc Syringe clear, with scale, threaded, for manual use, includes plunger.

Cap with thread for syringes

This switch is used to trigger and stop dispensing with your foot. Since the shape of the metal bracket varies with the dispenser, select the switch design for the type of dispenser you are using.

Foot Switch for pneumatic dispensing units

Control System Electronic, Image Recognition; Number of Axes Controlled 3; Travel Range 80-500 mm; Operating Speed 1-500 mm/s; Repetitive Position Accuracy ±0.005 mm Mushashi Engineering’s IMAGEMASTER 350PC Smart series of desktop gate-type dispensing robots with camera alignment and laser Z follow features PC control image recognition and provides a fusion dispensing “core” technologies with Musashi Engineering’s desktop robot platform. With its automatic correction for individual differences in works and pallet array errors, the IMAGEMASTER 350 PC Smart series provides complete 3-D alignment, approximately 30% improvement in operation efficiency leading to significantly reduced labour time, yield improvement thanks to high-quality dispensing, as well as operability improvement and reduction in programming effort. This series’ new edge-detection function with support for various work shapes allows for adjustment of the position of work using image processing in a broader range of conditions, including works that could not be detected previously. Coordination with the dispenser is improved by the SynchroSpeed™ function, achieving a constant drawing width that is independent of robot speed. Thus, high-quality dispensing is implemented without the need for complicated adjustments. With its repetitive positioning accuracy of ±0.005 mm, the IMAGEMASTER 350PC Smart series offers high levels of dispensing quality for enhanced yield. Available with X- and Y-axis working areas from 200 to 500 mm, these dispensing robots are suitable for a variety of workspace environments. Musashi Engineering’s IMAGEMASTER 350PC Smart series allows fully automated, high- 3-axial dispensing – for example dispensing various optical adhesives in photonics applications. A broad portfolio of accessories is available for Musashi Engineering’s dispensers, ranging from high-precision, high-quality, highly reliable syringes & accessories to unique nozzles and needles that can handle any type of fluid and dispensing requirements as well as other accessories for dispensers. Specifications: Name 350PC Smart SM200ΩX 350PC Smart SM300ΩX 350PC Smart SM400ΩX 350PC Smart SM500ΩX Model 350PCS-SM200OMEGAX 350PCS-SM300OMEGAX 350PCS-SM400OMEGAX 350PCS-SM500OMEGAX Number of Controlled Axes 3 Axes Control Method PTP Control, Interpolation Control Travel Range X, Y-Axes 200 x 200 mm 300 x 300 mm 400 x 400 mm 500 x 500 mm Z-Axis 80 mm PTP Operation Speed Setting Range X, Y Axes 1 to 500 mm/s Z-Axis 1 to 400 mm/s Interpolation Operation Speed Setting Range X, Y Axes 0.1 to 500 mm/s Z-Axis  0.1 to 400 mm/s Repetitive Positioning Accuracy X/Y/Z ±0.005 mm Transportable Weight (*1) 20 kg Rated Power Supply 100 to 240 VAC, 50/60 Hz Power Consumption (*1) 250 W 300 W External Dimensions (*1) Width 465 mm 595 mm 695 mm 795 mm Depth 460 mm 570 mm 670 mm 770 mm Height 590 mm 590 mm 590 mm 590 mm Weight (*1) 47 kg 60 kg 79 kg 94 kg *1 This is a reference value and varies according to option configurations. Key Features: Support SynchroSpeed™ Function for Coordination With Dispenser Edge Detection Function Supporting Various Work Shapes Dispense Correction Function Syringe Setup Gap Measurement Data Retention Nozzle Cleaning and Test Shot Production Management Functions: Production Log, Process Monitoring Inspection Functions: Dimension Measurement, Dispense Path Trace, Map Generator, Simple Dispense Shape Judgment Other Functions: 3-D Alignment, Work Height Measurement, Nozzle Height Detection, Offset, Nozzle Gap Correction, Automatic Focus, Log Options: Leakage Protection Box, Field Network Unit, Teaching Pendant Set, External Operation Box, Work Bases, Holder Units, Nozzle Cleaner, Protection Cover, Signal Tower, Dispenser Connection Cable Fast and Easy Programming Complete 3D Alignment Also Available in Clean Room Edition CE Marking Certified, EU RoHS Compliant Applications: Fully Automated, High-precision and Fast Dispensing of Optical Adhesives, Solder, UV Adhesives, Threadlockers and Other Fluids

Handgun for 5cc Syringes

Volume Measuring & Plunger Dispensing System; Dispensing Volume 0.00001-0.65 ml; Viscosity Range 1-100,000 mPa*s; Liquid Material Supply Pressure 0.001-0.500 MPa Musashi Engineering’s volume measuring type digitally controlled dispenser MEASURING MASTER™ MPP-1 provides precisely constant volume dispensing of fluids with variable or changeable viscosity – for example dispensing various optical adhesives in photonics applications. This system’s ultra-precise dispensing is available thanks to a volume measuring type, digitally controlled plunger. With its wide range of pump capacity variations, MEASURING MASTER™ MPP-1 allows to select pump capacity (fully filled volume) to suit application requirements. Various customizations are available to suit liquid material specifications. An optional slit nozzle allows even full-surface film dispensing in a single pass. A broad portfolio of accessories is available for Musashi Engineering’s dispensers, ranging from high-precision, high-quality, highly reliable syringes & accessories to unique nozzles and needles that can handle any type of fluid and dispensing requirements as well as other accessories for dispensers. Key Features: Ultra-precision Constant Volume Dispensing of Liquid Material With Varying Viscosity Wide Applicable Viscosity Range: 1 to 100,000 mPa*s Storage Capacity for as Many as 400 Channels of Dispensing Conditions Provided by Multi-channel Set Dispensing Volume to Suit Capacity and Density High Resolution High Linearity Tool-less Operation: Fluid Replacement Executable Without Any Tool Easy Maintenance for Fluid-exposed Part Dispensing System: Volume Measuring Type & Plunger Type Control System: Microcomputer Digital Control System Dispensing Volume Range Standard Type: 0.15 ml Dispensing Volume Range B1 Type: 0.15, 0.30 or 0.65 ml Minimum Dispensing Volume Setting Value: From 0.00001 ml Liquid Material Supply Pressure Range: 0.001 to 0.500 MPa Applicable Containers: Syringe (10, 20, 30, 50 or 70 ml) Channel Number: 400 Channels Rated Voltage: 100 to 240 VAC, 50/60 Hz Power Consumption: 25 W Dimensions Controller Section: Width 300 mm x Depth 250 mm x Height 111 mm (Excluding Protrusion) Weight Controller Section: Approx. 4.5 kg Dimensions Head Section: Width 25 mm x Depth 86.5 mm x Height 320 mm (Excluding Protrusion): Weight Head Section: Approx. 850 g (Not Containing Container and Liquid Material) CE Marking Certified, EU RoHS Compliant Applications: Constant Volume Dispensing of Fluids With Changeable Viscosity; Dispensing into Vial Bottles; Potting of Sensor Components; OCR (Dam); Oil Filling With Precise and Constant Volume; Dispensing of Battery Electrolyte; Ink Dispensing; Underfilling

Volume Measuring & Plunger Dispensing System; Dispensing Volume 0.0001-7 ml; Liquid Material Supply Pressure 0.001-0.500 MPa; Containers Barrel Cartridge, Tank, Pail Can Musashi Engineering’s volumetric type digitally controlled dispenser MEASURING MASTER™ MPP-3 provides precisely constant high-capacity volume dispensing of fluids with variable or changeable viscosity – for example dispensing various optical adhesives in photonics applications. MEASURING MASTER™ MPP-3’s reliable and continuous dispensing is not affected by changes in viscosity with ambient temperature, differences in individual lots or higher liquid material viscosity. Its ultra-precise dispensing accuracy is available thanks to a volume measuring type, digitally controlled plunger pump dispensing system. Excellent constant flow results in stunning line formation. And a suck-back mechanism guarantees superior liquid cut-off. MEASURING MASTER™ MPP-3 allows to connect various liquid material containers such as barrels (170 ml, 340 ml) as well as tanks. Select your container to suit your usage volume and production conditions. A broad portfolio of accessories is available for Musashi Engineering’s dispensers, ranging from high-precision, high-quality, highly reliable syringes & accessories to unique nozzles and needles that can handle any type of fluid and dispensing requirements as well as other accessories for dispensers. Key Features: Large Volume: 10 Times the Capacity Compared to MEASURING MASTER™ MPP-1 Volume Measuring High Dispensing Accuracy Further Improved Productivity Achieved by Significant Increase in Plunger Capacity Original Step-Out-Free Plunger Mechanism Suitable for High Viscose Fluid Dispensing of Abrasive Material Dispensing System: Volume Measuring Type & Plunger Type Control System: Microcomputer Digital Control System Dispensing Volume Range Standard Type: 5, 7 ml Dispensing Volume Range B1 Type: 5, 7 ml Minimum Dispensing Volume Setting Value: From 0.0001 ml Liquid Material Supply Pressure Range: 0.001 to 0.500 MPa Applicable Containers: Barrel Cartridge (170, 340 ml), Tank, Pail Can Channel Number: 400 Channels Rated Voltage: 100 to 240 VAC, 50/60 Hz Power Consumption: 53 W Dimensions Controller Part: Width 300 mm x Depth 250 mm x Height 111 mm (Excluding Protrusion) Weight Controller Part: Approx. 5.2 kg Dimensions Head Part: Width 46 mm x Depth 83 mm x Height 414 mm (Excluding Protrusion): Weight Head Section: Approx. 2.8 kg (Not Containing Container and Liquid Material) CE Marking Certified, EU RoHS Compliant Applications: Constant High-capacity Volume Dispensing of Fluids With Changeable Viscosity; CIPG (Gasket); Dispensing of Two-component Radiant Adhesives; OCR (Fill)

Control System Electronic, Pneumatic; Dispensing Pressure 0-700 kPa; Dispensing Time 0.010-9999 s; Vacuum Pressure -20-0 kPa Musashi Engineering’s high-precision digital air pulse dispenser controller ML-5000XII provides excellent dispensing accuracy that is achieved thanks to the integration of an air pulse stabilization circuit. Sophisticated engineering has resulted in a compact installation area reduced by 65%. The ML-5000XII system’s input signal is selectable between “no voltage” and “applied voltage”, with voltage levels of 5 V, 12 V or 24 V by use of an input signal selection DIP-switch. This compact dispensing systems features special functions like a digital vacuum drip prevention mechanism with micrometer specification, a stopwatch function or a dedicated shot switch that ensure high-quality dispensing of a broad range of fluids like various optical adhesives in photonics applications. A broad portfolio of accessories is available for Musashi Engineering’s dispensers, ranging from high-precision, high-quality, highly reliable syringes & accessories to unique nozzles and needles that can handle any type of fluid and dispensing requirements as well as other accessories for dispensers. Key Features: Excellent Dispensing Accuracy Integrated Air Pulse Stabilization Circuit Compact Installation Area Dimensions: 188 x 198 x 76 mm DIP-switch for Input Signal Voltage Selection Control System: Electronic/Pneumatic Pressure Adjusting Range: 0 to 700 kPa Vacuum Pressure: 0 to -20.0 kPa Dispensing Time Setting Range: 0.010 to 9,999 s LED Digital Display Digital Vacuum Drip Prevention Mechanism (Micrometer Specification) Stopwatch Function Shot Switch Input/Output Signal Maximum Supply Air Pressure: 800 kPa (Dispensing Pressure +100 kPa or More) Power Supply: 100 to 240 VAC, 50/60 Hz Power Consumption: 17 W Weight: 4 kg CE Marking Certified, EU RoHS Compliant Applications: High-precision Dispensing of Optical Adhesives, Solders, Other Fluids

Control System Microprocessor Digital; Dispensing Pressure 5.0-700.0 kPa; Dispensing Time 0.001-9999 s; Vacuum Pressure -20-0 kPa Due to the integration of an air pulse stabilization circuit (PAT), Musashi Engineering’s high-precision digital air pulse dispenser controller ML-6000X provides superior discharging performance, eliminates dispensing volume fluctuation and implements excellent dispensing accuracy. The ML-6000X air pulse dispenser controller is equipped with a variety of next-generation functions that enable integrating the device in industry 4.0 applications. Simplified log functions record parameters like dispensing pressure, vacuum pressure, channel, or dispensing model. Various error and alarm signals are generated like residual quantity warning, pressure abnormality, solenoid valve alarm and others. With its user-friendly 2.4 inch colour graphic LCD display and multi-language support, the ML-6000X air pulse dispenser allows for easy set-up and operation. A broad portfolio of accessories is available for Musashi Engineering’s dispensers, ranging from high-precision, high-quality, highly reliable syringes & accessories to unique nozzles and needles that can handle any type of fluid and dispensing requirements as well as other accessories for dispensers. Key Features: Dispensing Method: Air Pulse Dispensing Modes: Timed Mode, Manual Mode Excellent Dispensing Accuracy Eliminates Dispensing Volume Fluctuation Integrated Air Pulse Stabilization Circuit (PAT) Control System: Microprocessor Digital Display: 2.4 Inch Colour Graphic LCD Dispensing Pressure Adjustment Range: 5.0 to 700.0 kPa Vacuum Pressure Setting Range: 0 to -20.0 kPa Number of Channels: 100 Main Functions: Simplified Log, Simplified Remaining Volume Detection, Interval, Channel Registration, Channel Switching, Manual/Timed Mode Switching, Dispensing Count, Error Output, Alarm Output, Stop Watch Dispensing Time Setting Range: 0.001 to 9999 s Interface: RS232 Serial Communication Maximum Supply Air Pressure: 800 kPa (Dispensing Pressure +100 kPa or More) Power Supply: 24 VDC (D-Sub 25-pin) or 100 to 240 VAC, 50/60 Hz (With AC Adapter) Power Consumption: 12 W Dimensions: 180 x 185 x 83 mm Weight: 3 kg CE Marking Certified, EU RoHS Compliant Applications: High-precision Dispensing of Optical Adhesives, Solders, Ag Paste, Other Fluids