ATC-NS-250 NEOCLEAN S250 Cleaning Tools for Optics

Cleaning Tools for Optics;NEOCLEAN;Pen;Single-Core;SC;FC;ST;E2000

Polishing film;1.25mm/2.5mm diameter;Final

The INX 760 Probe Microscope by Viavi is a next-generation fiber inspection solution engineered for high-speed, high-density optical networks. Designed to meet the evolving demands of AI, hyperscale data centers, and telecom infrastructure, the INX 760 delivers fully automated inspection for single, duplex, and multifiber connectors. With its intuitive operation, rugged design, and Test Process Automation (TPA) capabilities, it ensures consistent, repeatable results in seconds—minimizing human error and maximizing operational efficiency.This field-optimized microscope is built to simplify complex inspection workflows while maintaining compliance with IEC 61300-3-35 standards. Whether you're deploying ultra-high fiber count (UHFC) networks or maintaining legacy infrastructure, the INX 760 provides the speed, accuracy, and reliability required for modern optical environments.Key FeaturesTrue Automated InspectionThe INX 760 automates every step of the inspection process—from test setup and tip configuration to image panning, focusing, and end-face analysis. This dramatically reduces inspection time and eliminates variability caused by manual operation.PanOptic Imaging EngineViavi’s proprietary PanOptic Imaging Engine delivers edge-to-edge clarity without compromising magnification or resolution. This ensures that even the smallest defects are detected across the entire field of view.AutoID Inspection TipsEliminate configuration errors with AutoID-enabled tips that automatically identify connector types and adjust settings accordingly. This feature enhances accuracy and speeds up connector changes in the field.TPA-Enabled Workflow IntegrationThe INX 760 is fully compatible with Viavi’s Test Process Automation (TPA) framework, enabling seamless integration into automated test environments. This ensures alignment, repeatability, and traceability across inspection tasks.Rugged and Field-ReadyEngineered for durability, the INX 760 is optimized for field use with a robust design that withstands harsh environments while delivering lab-grade performance.ApplicationsThe INX 760 is ideal for:AI and hyperscale data centers: Supports rapid deployment and maintenance of ultra-high fiber count (UHFC) networks.Telecommunications infrastructure: Ensures clean, compliant connections in high-bandwidth environments.Field service and installation: Reduces inspection time and training requirements for technicians in the field.Manufacturing and QA: Enables automated, repeatable inspection processes for connector production lines.

FC/PC Type N (Wide Key); Square Shape; Zirconia Sleeve; Simplex; SM/PM

Gold Coated, Single Mode, Multi Mode; 190 to 2400 nm; Core Diameter 50 to 400 µm; Mode Field Diameter 4.3, 9.0 µm; Cladding Diameter 125 to 440 µm; Numerical Aperture 0.12 to 0.275Fiberguide’s AFS-G/SFS-G/AGI-G/ASI-G series of gold coated high temperature optical fibers is designed to achieve the widest temperature range (-269 to +700 °C) of any optical fiber on the market. This, combined with excellent corrosion resistance, and the fiber’s ability to be soldered or brazed, makes it the ideal fiber for many high temperature applications such as turbine flame monitoring, oil and gas down-hole sensing, and high vacuum or pressure applications. As an option, some types of gold coated high temperature fibers can be provided with a broad selection of shaped tips – standard configurations as well as custom designed shapes. Shaped tip fibers provide optimum control over beam delivery and/or increased efficiency of light collection. Some of the fibers can also be end capped to achieve higher coupled power into a fiber core by reducing the power density at the air / silica interface, commonly the point of laser damage. End cap diameters and lengths are offered for select numerical apertures and fiber cores size, but can be easily customized for a variety of fiber types and specialized applications. Additionally, all fiber types can be equipped on demand with Fiberguide’s patented RARe Motheye anti-reflective technology that enhances fiber transmission performance and significantly increases the damage threshold for your application over a large wavelength range.Key Features: Multi Mode (Step/Graded Index) or Single Mode Fibers Pure/Germanium Doped Fused Silica Core, Fluorine Doped/Pure Silica Cladding Coating: Gold Core / Cladding Sizes: 50/125 to 400/440 µm (MM) Mode Field Diameter / Cladding Sizes: 4.3/125, 9.0/125 µm (SM) Numerical Aperture (NA): 0.12 to 0.275 Recommended Bend Radius: Short Term 100 x Clad Diameter, Long Term 200 x Clad Diameter 100% Proof Test Using 4-Axis Bend Method Applications: Turbine Flame Monitoring; Oil and Gas Down-hole Sensing; High Vacuum Applications; High Pressure Applications

Cleaning Tools for Connectors, Plugs & Adapters; Pen, Simple or Stick Types; Connector Types MU, LC, SC, SC2, FC, FAS, FA, ST, E2000, PC/APC, ODC, MPO, MPT, ATC, Ø1.25 mm, Ø2.5mm; No Alcohol or Solvents NTT-AT’s NEOCLEAN series of fiber optical connector cleaners are tools that combine compactness with the workability of one-push cleaning. NEOCLEAN tools remove dirt you can’t even see, without scratching the connector’s end face. Designed to work with dedicated microfiber tissue, the NEOCLEAN series of fiber optical connector cleaners allows all operators to consistently achieve high quality cleaning without alcohol or other solvents.With NEOCLEAN-E, NEOCLEAN-EZ and NEOCLEAN-M/M2, the NEOCLEAN line of pen type fiber optical connector cleaners provides a line-up of nine different high performance hybrid type cleaners that provide cleaning for a broad range of both optical connector plugs and adaptors in one unit. The NEOCLEAN-E simple one push action cleans the ferrule end face in device adapters. Its cleaning cartridge is replaceable, with each cartridge performing about 750 cleanings, greatly reducing cleaning costs. Using the attached cap you can also the clean ferrule end face in plugs. The NEOCLEAN-EZ line features an especially compact body, designed for cleaning in the narrow spaces of optical connector ports with a one push action. Simply remove the front tip cap to clean optical plugs. Fixing the attachment to the rear end allows you to also clean deeply recessed optical ports. NEOCLEAN-EZv is developed exclusively for easy cleaning of 2 mm broadcasting and video optical connectors, while NEOCLEAN-EZ3 can clean 2.5 mm optical connector ports and plugs as well as 2 mm video connectors. NEOCLEAN-EZ1Plus can clean 1.25 mm optical connector ports, ODC plugs and ODC sockets. The NEOCLEAN-M series of pen type cleaners allows you to instantly clean MPO/MTP connectors. NEOCLEAN-M for 12-core systems and NEOCLEAN-M2 for 16-core systems respond to the need for end face cleaning. NTT-AT’s NEOCLEAN-R2 line of simple type fiber optical connector cleaners uses cleaning tape that does not produce dust and provides special cleaning strength while resisting foreign particles to mix into the tape. A simplified tape advance mechanism resulted in cost reductions for both manufacturing and assembly. The main body is also made from anti-static material.Also made with antistatic materials, the NEOCLEAN-S line of stick type fiber optical connector cleaners controls the generation of static electricity during the cleaning process. And just as with the reel type, the cloth in the cleaning part is made from special cleaning fiber. Featuring 1.25 mm or 2.5 mm ends, NEOCLEAN-S is a very useful tool for cleaning connector end faces inserted into adaptors and housings. Key Features: Compact Design- Easy to Use and Efficient No Alcohol or Solvents Pen, Simple and Stick Types Available Cost Effective Replaceable Cartridge (NEOCLEAN-E) Excellent Anti-static Properties Applications: Cleaning of Single Core and Multi Core Fiber Optical Connectors, Plugs & Adapters; Cleaning of Fiber Optical Connectors for Video Equipment

Cleaning Tools for Optics;NEOCLEAN;Stick;Single-Core;MU;LC