AD30LP4N FC/PC Adapter

Cartridge;OPTIPOP;Consumable

FC/PC, FC/APC; Key Width 2.05 mm Type R (Narrow Key), 2.18 mm Type N (Wide Key); Square Shape; Sleeve Zirconia, Phosphor Bronze; Simplex; Fiber Type SM/MM/PM Optoplast’s series of FC Square solid adapters connect any single mode, multi mode or polarization maintaining fiber cable terminated with industry-standard FC Connector Kits and minimize back reflections by bringing the fibers’ cores into physical contact. Equipped with standard phosphor bronze (multi mode), high-quality phosphor bronze (single mode) or zirconia mating sleeves (single mode), these high-quality manufactured adapters reliably align the cores of each terminated fiber, guaranteeing a very low insertion loss. After 500 connections the insertion loss variation stays below 0.10 dB.  While the PC version has a wide key (2.18 mm) accepting both wide and narrow key connectors, the APC version’s narrow key (2.05 mm) ensures very accurate angular orientation for single mode and polarization maintaining fibers. The light weight products are easy to handle and their square flange with through holes allows for fast mounting the adapters to panels and other structures in various applications and environments.  Key Features:  - Adapters/ Mating Sleeves to Align FC Connector Terminated Fiber Cables  - Compliant With NTT Specifications  - Low Insertion Loss  - High Durability  - Precision Alignment Straight Split Sleeves  Applications: Telecommunications; Local Area Network (LAN); Fiber Optic Instruments; Testing of Optical Devices 

Bulkhead Receptacles;Polarization Maintaining;FC/PC

Non-latching; 16x16, 24x24, 32x32; Fiber Type SM, MM; 1240 to 1650 nm; Insertion Loss 0.5 to 2.5 dB; Crosstalk 60 dB; Switching Time <100 ms Sercalo Microtechnology's OCX series of NxN fiber optic matrix switches are non-blocking devices that connect any of the input fibers to any of the output fibers. These 16X16 up to 32x32 optical cross connects are using an optical free space technology. Over a RS232 or USB interface the individual ports can be addressed. The optical connections are set by a 3D MEMS switch network, where micromachined silicon mirrors redirect light from the specified input port to the selected output port. The use of MEMS technology offers low cost together with excellent optical performance. The OCX series of fiber optic cross connects is built using Sercalo Microtechnology’s established MEMS technology. The MEMS mirrors are stable enough to operate the switch in open loop. The switch is fully bi-directional and transparent to the full wavelength range of the installed fiber. The switch architecture is non-blocking: Any of the input ports can go to any of the free output ports. This hitless non-blocking switch for demanding applications in fiber optic instrumentation or communication is currently in initial production with port counts up to 32x32. The switch is designed for integration into a network system. Key Features: Non-blocking Fully Bi-Directional Reliable Wavelength Range: 1240 to 1650 nm Low Insertion Loss: 0.5 to 2.5 dB Switching Time: <100 ms Standard Port Counts: 16x16, 24x24, 32x32 Custom Port Count NxM Available on Request Crosstalk: 60 dB Single Mode (SM) or Multi Mode (MM) Fiber UART and USB Interfaces Applications: Optical Network Switching; Fiber Optic Cross Connect; Fiber Optic Test and Measurement; Data Center Optical Switching