1Cure Epoxy Curing Oven

Single Chip; 973-977 nm; Spectral Width 0.2 nm; Max. Output Power 0.18-0.6 W; 10-pin Mini Butterfly Package; Threshold Current 50-60 mA Within the CM96x series, II-VI Incorporated offers a variety of single-chip pump laser modules addressing all areas of low-noise all-optical amplification and power consumption requirements. Increasingly, network providers are concerned with component density and power consumption which translates into cost of installation and cost of ownership of a network. To address this, II-VI Incorporated offers a suite of 980 nm pump lasers from uncooled, semi-cooled and traditional-cooled pumps over a set of market leading power ranges. CM96x series pump laser modules are designed as pump sources for erbium-doped fiber amplifier (EDFA) applications. Processes and techniques of coupling the fiber to the laser allow high output powers that are very stable with both time and temperature. The CM96x series uses a 10-pin mini-butterfly (mBTF) package with mounting holes for ease of integration and thermal management, enabling smaller form factor designs. The 10-pin mBTF package is backward compatible with 14pin BTF package footprint and pinout. CM96Z***-7* TEC-cooled, 10-pin butterfly, 980 nm pump laser modules utilize a fiber Bragg grating design for enhanced wavelength and power stability performance. This product has been designed to ensure superior wavelength locking over drive current, temperature and optical feedback changes. CM96Z***-7* devices are available with kink-free output powers to 600 mW. CML96Z***-7* is the low power consumption version of CM96Z***-7*. These pump modules operate at significantly reduced TEC and overall power consumption. CML96Z***-7* devices are also available with kink-free output powers to 600 mW. The UM96Z***-7* high power, extended temperature, uncooled, 980 nm pump laser are II-VI Incorporated’s third-generation uncooled pump modules providing higher powers and lower consumption. These lasers enable designers to create reliable SFF single- and multi-channel, high-bit-rate per-channel amplification as well as replace traditional cooled pumps in high-power EDFA applications with reduced power consumption. The UM96Z-series is designed for uncooled operation at high temperature and power levels. Qualification of the enhanced G08 chip ensures high reliability even at 460 mW operating power and +75 °C. External fiber Bragg grating (FBG) stabilization provides excellent wavelength and power stability over the entire operating temperature range. Key Features: High Output Power: up to 600 mW Kink-free Low Power Consumption/Dissipation (CML96Z***-7*, UM96Z***-7*) Single Mode (SM) Fiber Pigtail, Polarization Maintaining (PM) Fiber (UM96Z***-7*) Fiber Bragg Grating (FBG) Stabilization for Wavelength Locking Over the Entire Operating Conditions Small Form Factor: Hermetically Sealed 10-pin Mini-Butterfly Package Pin-out Compatibility With 14-pin Butterfly Package Operating Wavelength: 973 to 977 nm Spectral Width: 0.2 nm Typical Threshold Current: 50, 55, 60 mA Typical Operating Forward Voltage: 1.7, 1.85 V Typical Maximum Operating Current: 375 to 1,000 mA Return Loss (RL): >35 dB Internal Thermoelectric Heatpump and Monitor Photodiode (CM96Z***-7*, CML96Z***-7*) Telcordia GR-468-CORE Compliant Field-proven High Reliability RoHS Compliant Applications: Low-noise EDFAs; Single- or Multi-stage EDFA Applications Including Single-channel and Dense Wavelength Division Multiplexing (DWDM) Designs; CATV Applications

Size 25.4-152.4 mm; Reflectance Material Spectralon®, Spectraflect®, Infragold®; No. of Ports 3, 4; Port Diameter 6.35-63.5 mm; Detector Assemblies Si, Ge, InGaAs Labsphere’s 3P/4P-GPS-X series of general-purpose integrating spheres with 3 ports or 4 ports respectively provides a broad range of different models, suitable for various requirements. Choose your sphere by selecting size, ports, and reflectance material/coatings. The addition of a wide range of interchangeable accessories including light sources, assemblies, port reducers and more allows for an endless number of application solutions. This flexibility allows you to create your own uniform source or light measurement system or modify an existing system in a matter of minutes. A variety of system calibration options enable systems to be customized for application specific tasks. Labsphere’s integrating sphere design features sturdy port frames, easy access mounting options, and quick-change accessory options meeting a multiple of requirements. Labsphere’s dedicated Calibration Lab provides calibration options to ensure your system is customized to meet specific application requirements. As you change components, simply click on the system software to recalibrate. Spheres are offered with Spectraflect®, Spectralon® or Infragold® coating which combines a highly reflective surface with nearly perfect Lambertian reflectance. Both durable and highly stable over time, these coatings ensure optimal integration of light over the lifetime of your sphere. All of Labsphere’s products are created in an ISO 9001 registered environment and provide NIST traceable results upon calibration. Once the configuration has been selected, AMS Technologies qualified engineering and support experts are available to help you with your specific application needs. For quick and easy start-up, Labsphere’s 3P/4P-GPS-X series general purpose starter kits are conveniently packaged with the supplier’s most common port accessories, adaptors, and integrating sphere mounting components to help you get started. For specifications about Labsphere’s 3P/4P-GPS-X series of general-purpose integrating spheres and kits, please download the datasheet. Key Features: Sizes: Miniature 25.4-51.2 mm (Cube Style), Standard 76.2-152.4 mm Reflectance Materials: Spectralon®, Spectraflect® Coating, Infragold® Coating Number of Ports: 3 (2 ports on the sphere’s equator at 0° and 90°, 1 port at the top), 4 (an additional port opposite the 0° port) Port Diameter: 6.35-63.5 mm Baffle mounted between the 0° and the 90° port Optional Light Sources: Internal Halogen (5-100 W), Ecternal Halogen (Dichroic 30-120 W, Rhodium 40-100 W) Available Detector Assemblies: Silicon, Germanium; Indium-Gallium-Arsenide InGaAs Accessories: Illuminator or Detector Assemblies, Port Reducers, Port Plugs, Filters, and more… Calibration Options: Total Spectral Flux Calibration, Radiance Calibration, Exit Port Uniformity Mapping, and more… Applications: Light Measurement; Remote Sensing; Image Sensor Test; Researching and Prototyping; Building Your Own Systems

800 nm Band Optimized; Active Area 0.03 to 19.6 mm2; AA Dia. 0.2 to 5.0 mm; Responsivity 20 to 50 A/W; Capacitance 1.5 to 105 pF; Package TO-5, TO-8, TO-52 OSI Optoelectronics’ APD series of silicon avalanche photodiodes make use of internal multiplication to achieve gain due to impact ionization. The result is this optimized series of high responsivity devices, exhibiting excellent sensitivity. OSI Optoelectronics offers several sizes of detectors that are available with flat windows or ball lenses for optical fiber applications. Optimized for the 800 nm wavelength band, the APD series is available with five different active area sizes ranging from 0.2 to 5.0 mm in diameter. Depending on active area size, the devices are supplied in TO-5, TO-8 or TO-52 packages. Key Features: High Speed Responsivity / QE High Bandwidth / Fast Response Low Noise Low Bias Voltage Hermetically Sealed TO-Packages Applications: High Speed Optical Communications; Laser Range Finders; Bar Code Readers; Optical Remote Control; Medical Equipment; High Speed Photometry

Detector Type Proprietary CMOS; 350-1550 nm; Pixel Size 5.3 x 5.3, 5.86 x 5.86 µm; Position Resolution 1.5-2.5 µrad; Interface USB 3.0; Clear Aperture 36-100 mmDuma Optronics provides a complete series of optical and mechanical alignment solutions, including systems based on autocollimation and laser alignment. Alignment sensing provides simultaneous position and angle measurements for various applications. By combining autocollimation principles with laser alignment, this series of alignment solutions yields extreme accuracies in angular measurement and offers capabilities of inter-alignment between several lines of sight with resolutions in the microradian range. Laser Analyzing Electronic Autocollimator: A combination of electronic autocollimator, measuring minute optical reflections in the visible and NIR, with laser beam analysis providing beam direction and divergence as well. A proprietary version measures and compares reflections to angular directions of incoming beams. The laser analyzing electronic autocollimator is also available with an autofocus feature. Download datasheetAutocollimator HR: Extremely accurate large aperture autocollimator with a high resolution down to 0.01 sec. Download datasheetAlignMeter: A unique instrument for simultaneous measurements of attitude and position of incoming laser. AlignMeter allows simultaneous beam measurement of position (in µm) and angle (in µRad), where AngleMeter measures only incoming angles. Download datasheetLaser Analyzing Telescope: Beam characterization telescope for attitude measurements as well as degree of collimation, resolution down to 1 µrad. Download datasheetAngleMeter LA: Attitude measurements of incoming laser over extremely large angles. With its wide aperture, the AngleMeter LA measures angular laser deviations (in µRad) by monitoring the beam angle in two orthogonal directions, while Laser Analyzing Telescope will display beam divergence as well. Download datasheetKey Features: Complete Line of Laser Beam Alignment Solutions Combining Autocollimation Principles With Laser Alignment Extreme Accuracies in Angular Measurement Capabilities of Inter-alignment Between Several Lines of Sight Resolutions in the Microradian Range Full Beam Divergence and Attitude Characterization Available Unique Infrared IR Autocollimator up to 1550 nm Laser Analyzing Telescope Applications: Alignment of Laser Cavities; Straightness Measurement; Machine Alignment; Wide-bed Printers Alignment; Others