UVC LED Module

UV-NIR; 340-980 nm; 0.7-66.6 W; Iop 350-18,000 mA; Vop 1.4-16.6 V; Typ. Output Power 11-2,000 mW Mightex’s PLS-Series of precision LED spotlights are a general-purpose light source that can be used where uniform and high-intensity illumination is required. State-of-the-art high-power LED emitter and a proprietary high-NA multi-element aspherical optical system combine to produce a high-power, uniform illumination spot with a highly-delineated edge. PLS-Series standard range LEDs have a minimum working distance of 100 mm, being able to produce a 30 mm diameter spot at such distance. Spot diameter scales linearly with working distance. PLS-Series close range versions have a minimum working distance of 75 mm, being able to produce a 10 mm diameter spot at such distance. These close range PLS-Series LED spotlights also have a maximum working distance of 100 mm, producing a spot 17 mm in diameter. The projection lens at the front of the LED spotlights can be slid and locked to focus the illumination pattern at different working distances. The LED emitters are mounted directly on the metal base of the light source which also features an integrated heatsink. This configuration minimizes thermal resistance between the LED emitter and the heatsink, resulting in better heat dissipation. Multi-chip LED emitters (i.e. Type-B) have been added to the PLS-Series product portfolio. Some of these 7 W to 15 W LEDs have total optical power exceeding 500 mW, doubling the power of a single-chip LED. Such Type-B models with higher powers (7 W and higher) feature a cooling fan and have a different form factor compared to Type-A models. Please examine the installation drawings carefully. Power supply for the cooling fan is included in the price of the Type-B precision LED spotlights. The PLS-Series of precision LED spotlights includes a 2 m cable with two bare-wire terminals at the end. The light sources can be driven by Mightex LED controllers or other LED controllers and current sources. Key Features: Uniform Illumination Spot With a Highly Delineated Edge Wide Range of Available Wavelengths: 340 to 980 nm, 3000 to 6500 K for White LED Versions 0.7 to 66.6 W High-power Emitters Multi-element Aspherical Optics High Output Power: 11 to 2,000 mW Minimum Working Distance: 100 mm (Standard Range Types), 75mm (Close Range Types) Maximum Working Distance: 100 mm (Close Range Types) Spot Diameter at Minimum Working Distance: 30 mm (Standard Range Types), 10 mm (Close Range Types) Spot Diameter at Maximum Working Distance: 17 mm (Close Range Types) – for Standard Range Types Spot Diameter Scales Linearly With Working Distance Adjustable Focus Integrated Heatsink Multiple Mounting Features for Lab and OEM Applications Applications: General Purpose Light Source; Machine Vision; Bio-photonics; Semiconductor Equipment; UV Curing

UV-NIR; 365-730 nm; 33.3-106.2 W; Iop 2.4-18 A; Vop 2.9-5.1 V; Typ. Output Power 260-3,500 mW Mightex has added Type-H and Type-J super high-power collimator LED light sources with 30 to 106 W emitters to the LCS-Series of collimated LED light sources. These collimator light sources produce a market-leading optical power output of up to 3.5 W, which is up to 5 times from Mightex’s existing high-power Type-B collimator LED light sources. Four mechanically differing sub-series with clear apertures of 11, 22, 38 and 48 mm are available. The LED emitters are mounted directly onto the metal base of the collimator which also features an integrated heat sink and a cooling fan (Type-H models only). This configuration minimizes thermal resistance between the LED emitter and the heat sink resulting in better heat dissipation. The collimating lens can be adjusted if needed for precise collimation. A locking ring fixes the lens position after adjustment. The collimators have been pre-adjusted in the factory. The new Type-H and Type-J super high-power LCS collimated LED light sources are larger in dimensions compared with existing Type-A and Type-B LCS light sources. Please examine the installation drawings carefully. Power supply for the cooling fan is included in the price of the Type-H super high-power LCS collimated LED light sources. The LED collimators include a 1.5-meter cable with two bare-wire terminals at the end. The light sources can be driven by Mightex LED controllers or other LED controllers and current sources. Super high-power LCS-Series collimated LED light sources are compatible with a large number of optical accessories/adapters: An optional focusing module can be mounted on the front of the LED collimator to focus light into a tight spot which is an image of the LED emitter. This is useful for application requiring very high optical density such as fluorescence spectroscopy, or to focus LED light into a fiber or a lightguide. An optional lightguide adapter is also available to couple the LED light into a lightguide with high efficiency. Additional interchangeable collimating lenses are available to produce different beam sizes with the same light source. Key Features: Interchangeable Aspherical Collimating Lens High Numerical Aperture (NA)- High-power Emitters (up to 106 W) Wavelength Range: 365 to 730 nm High Typical Collimated Output Power: 260 to 3,500 mW Adjustable Focus Optional Focusing Module Optional Lightguide Adapter Multiple Mounting Features for Lab and OEM Applications Integrated Heatsink and Cooling Fan (Type-H Models) Applications: Microscope Illuminator; General Purpose Light Source; Fiber Coupling (With Optional Focusing Module)