ThermoRack 401 Thermoelectric Recirculating Chillers

Liquid to Ambient Air Cooling System; 1,300 to 3,500 W @ 25 K initial temperature difference; Modular; 230, 115 V; 4.9 to 8.7 l/min @2.1 bar Lytron’s MCS series of modular liquid cooling systems are a cost-effective and reliable option where precise temperature control and cooling below ambient temperature are not required. These systems consist of a high-performance heat exchanger integrated with a fan, pump and tank in a durable metal chassis. MCS modular liquid cooling systems feature cooling capacities of up to 3.5 kW. Components of MCS modular liquid cooling systems are performance-matched for maximum cooling capacity. The most critical component, the heat exchanger, is designed for optimum performance. All components have been designed for long life and high reliability. Lytron offers systems that are compatible with a range of coolants, ensuring there is an option available for nearly every fluid. MCS modular liquid cooling systems are easy to use with installation instructions as simple as completing the liquid loop, filling the liquid reservoir tank and flipping the switch. These systems offer a fast option for upgrading to liquid cooling in a cost effective and reliable package. Key Features: Cooling Capacity: 1,300 to 3,500 W @ 25 K initial temperature difference (hot coolant temperature  – cold ambient air temperature)  Fluid Connections: ½” FNPT Reservoir Capacity: 2.8 l Maximum Liquid Temperature: +55 °C Recommended Coolant: Water (MCS30: Oil, EGW) Pump Performance: 4.9 to 8.7 l/min @ 2.1 bar Dimensions: 439 x 384 x 338 mm (MCS20/MCS30), 381 x 381 x 610 mm (MCS40/MCS50) Applications: Power Supply Cooling; Power Conversion Cooling; Process Automation Systems; Security Screening; Sample Test Equipment Cooling Systems; Diagnostic Systems; Medical Lasers; MRI; Edge Computing Center Cooling Systems

Integrated Power Meter, Light Source, Connector Inspection; 1260 to 1650 nm; RL Measurement Range 0 to 70 dB; Power Measurement Range -85 to +15 dBm; Light Source Output Power -3 to -9 dBm; Source Modes CW, Tone, Auto-λ, Multi-λ; Connector Type APC, SC, FC, ST Viavi Solutions’ ORL-85/85P series of SmartClass Fiber optical return loss meters combine optical power meter (OPM), light source (OLS), continuous wave return loss meter (OCWR) and connector inspection in one versatile and compact instrument – ideal for measuring optical return loss and inspecting fiber connector end faces to verify optical connection quality. Optical systems with high-speed lasers, analog transmission (CATV), or Raman amplifiers require high return loss for maximum performance. Furthermore, optical return loss measurements can be used to prove that an installation was completed carefully and accurately; for example, they can show that the optical connectors were inspected and are clean. The ultra-sensitive power meter combined with stabilized light sources enable up to a 70 dB measurement range. The angled single-mode test port (APC) guarantees highly accurate return loss measurements without requiring external termination for up to 50 dB return loss measurements. The ORL-85/85P series is compatible with the P5000i digital analysis microscope for checking fiber end-face quality and getting pass/fail acceptance results at the push of a button. The ORL-85P features an integrated patch-cord microscope (PCM) for added value and improved workflow efficiency. Threshold settings for pass/fail indications and the intuitive touch screen user interface transforms users into instant fiber experts without the need for special training. Automatic functions, such as auto-λ and real-time multi-λ functionalities avoid handling errors and speed up test time significantly. The ORL-85/85P series are fully compatible with other members of the SmartClass Fiber family (OLS, OLP, and OLT) with these automatic functions. Users can easily save test results (power, return loss, and fiber inspection) with real-time stamp to generate certification reports. Test results can be easily uploaded to a PC for postprocessing with FiberChekPRO PC software. The ORL-85/85P inspection-ready optical return loss meters can be used anywhere today’s fiber technicians go, up poles or down holes. Technicians gain ultimate flexibility and performance from this powerful easy-to-use solution that can instantly transform any technician into a fiber expert. Key Features: Battery-operated, Field-portable Optical Return Loss Meter 1260 to 1650 nm Measurement Wavelength Range (Power Meter) Multiple Wavelengths (Source) Return Loss up to 70 dB Interchangeable Optical Adapters (Senko) for FC, SC, ST and LC Optical Connectors 3.5-in Color Touch Screen With Integrated Stylus Individual Threshold Settings for Power and Loss Pass/Fail Analysis Fiber Inspection and Test Results Storage With Time Stamp Data Transfer and Remote Control via USB or Ethernet Interface Auto-lambda and Multi-lambda Test Functions Applications: Measurement of Optical Return Loss; Measurement of Optical Power (Absolute and Relative); Measurement of Optical Insertion Loss; Inspection of Optical Connectors (IBYC)

400 W @ 20°C; >2 lpm @ 14 psig; 1/4 Valved CPC Fittings; Centrifugal Pump; Stainless Steel This thermoelectric recirculating chiller is a low-cost, high-performance device optimized for lasers, optics and life sciences. It features precise temperature control (±0.05°C repeatability), long-life reliability, quiet operation and environmental friendliness in a compact size. Using universal power, the TEC chiller is very energy efficient only drawing power when required.

635-1650 nm; Loss Range 21.5-44 dB; Loss Repeatability/Linearity 0.04, 0.06 dB; Power Accuracy 1% Kingfisher’s KI 23400 & KI 27400 is an optical, handheld, two-way loss test set (OLTS) with length and ORL measurement that is perfect for ultra-high fiber count tier 1 loss & length testing applications. A pair of these compact instruments set new standards of productivity, accuracy and ease of use. Each fiber needs just one test hook-up and one key press for a complete bidirectional loss, length and ORL test, for both single mode (SM) and multi mode (MM) fiber, so the same test method can be used for all fibers in a network, eliminating administration, training and test errors. Testing is accurate and can take only five seconds, direct onto a final report. The “Visitester” option lights up the far end of the fiber to be tested. A pair of KI 23400 & KI 27400 instruments both display length as well as bi-directional loss and ORL each end, in one hook-up, in real time, with no need to specify master/slave instruments. A single instrument can also be used as a stand-alone light source & power meter, ORL meter, VFL, or tone generator/detector. Key Features: Ease to Use, Slim & Versatile Loss, Length & ORL Tester for High Fiber Counts 25% of the Size/Weight, 7x the Battery Life of Competitors Alkaline Battery Life: 80 h USB External Power EF Compliant Multi Mode Sources Single Mode (SM), Multi Mode (MM), Quad & Other Wavelengths Wavelength Range 635 to 1650 nm Loss Range: 21.5 to 44 dB Loss Repeatability / Linearity: 0.04, 0.06 dB Bidirectional Autotest Loss, ORL & Length Testing on One Fiber Real-time Pass/Fail Display Interchangeable Connectors 8,000 Fiber Memory and USB Interface KITS™ Reporting Software Autotest Power Meter Power Accuracy: 1% 24 Calibrated Wavelengths Continuity Test Tone With Multi-Fiber ID VFL VisiTester Option ISO 17025 Traceable Full QA & Test Reports for Source Stability / λ, & Power Meter Linearity Dimensions: 190 x 105 x 35 mm Weight: 420 g 3 Year Warranty and Calibration Cycle Applications: Single Mode (SM), Multi Mode (MM) & Both Fiber Types; Tier 1 Cable Certification & Reporting; Bidirectional Loss, Length & ORL in One Hook-up With Integrated VFL (VisiTester); Optical Power, Continuity & Polarity

Vapor Compression Chiller; 1000 W @+35°C (amb)/+25°C (water); Flow Rate 5.5 lpm @ 0.5 bar, Temperature Stability ≥±0.05 K at constant load; Power Supply 90-264 VAC Key Features: Recirculating Water Chiller Easy to be Integrated in Customer Application User-Definable PID Parameters and Fan Velocity Silent Operation with Low Vibration and Noise Ideal for Water Cooling Tasks up to 1000 W Customizable booster cooling capacity IoT Ready as an Option: Remote Operation, Monitoring and Service over Integrated Ethernet Interface Depending on the temperatures of coolant (water) and ambient, AMS Technologies’ mRC-C-1000-100/240 recirculating chiller provides approximately 1000 W (Twater = +25°C, Tambient = +35°C) in silent mode boostable to higher cooling capacities with higher fan speeds. The chiller contains a compressor-based refrigerant circuit as well as a closed, recirculating coolant (water) circuit. Due to its speed-controlled compressor, the mRC-C-1000-100/240 recirculating chiller offers low vibration and noise throughout the compressor’s BLDC speed range. The system’s features include global operability due to a universal 90 to 264 VAC power supply, as well as an optional integrated Ethernet interface allowing remote operation, monitoring and service. Further options are a gear pump providing 5 bar @5 l/min, CPC inlet and/or outlet fittings, external coolant filters or dust filters, and a hardware set for 19” rack mount (6U). For lower heat loads, we also carry a mRC-C-450-100/240 mini Recirculating Chiller with up to 450 W cooling capacity. Specifications: Cooling Capacity: nominal 1 kW (Twater = +25 °C, Tambient = +35 °C) Temperature Stability: +-0.05°C at constant load Available Pressure Head: 0.5 bar @ 5.5 lpm (standard), 5 bar @ 5 lpm (optional) Control: Local, RS232, IoT Ready, Interlock Power Supply: 90 to 264 VAC, 24 VDC Derivative for OEM integrations available on Demand Power Consumption: <750 W Options: 19” Rack Mount (6U); Ethernet / IoT Ready; Optional Pumps; CPC Inlet/Outlet Fittings; External Coolant Filters; External Dust Filters; Green Version Based on Propane (R290) as Refrigerant Dimensions: 443 x 283 x 675 mm, Main Body Without Filter Approval: CE (in process) Applications: Water Cooling of Lasers and Other Applications with up to 1000 W Heat Load