TPMJ-3A-1550-8/125-0.25-5-2-12-2-AR PM Tapered and Lensed Fiber

Fiber Type SM, MM, PM; 400 to 2000 nm; Focused Spot Size 2.0 to 6.5 µm; Working Distance 3 to 30 µm; Minimum Strip Distance 5 mm; Return Loss -20 dB Standard, -25 dB With AR Coating OZ Optics TSMJ/TMMJ/TPMJ series of tapered and lensed fibers offers a convenient way to improve coupling between optical fibers and waveguide devices, laser diodes or photo diodes. By laser shaping the fiber end, the light can be transformed to improve mode matching and coupling efficiency with the waveguide device, laser diode chip or photodiode chip. The manufacturing process allows for improved coupling to either circular or oval input spots (this must be specified in advance). OZ Optics tapered and lensed fibers are manufactured by laser shaping the endface to create the optimal light output/input for specific applications. This method provides the best coupling efficiencies and mode matching abilities in a taper. An alternative technique is to instead polish the end face of the fiber to a specific radius and taper angle, forming a lens. Oval spots can also be formed using the polishing technique, normally by shaping the fiber to form a chisel or wedge shape. Single mode (SM), multi mode (MM) or Panda type polarization maintaining (PM) fibers can be tapered. For multi mode fibers, only polished versions with a polish radius and taper angle can be produced. OZ Optics can also generate other polish profiles, such as wedge shapes, which are useful for coupling strip laser diodes into multimode fibers. In general, OZ Optics uses polarization maintaining fibers based on the PANDA fiber structure when building polarization maintaining (PM) components and patch cords. However, OZ Optics can construct devices using other PM fiber structures. OZ Optics also carries some alternative fiber types in stock, please contact AMS Technologies for availability. If necessary, OZ Optics is willing to use customer supplied fibers to build devices. Custom configurations can be designed if required. Tapered fibers can be incorporated into other OZ Optics assemblies including the HSMJ, HMMJ, HPMJ series of hermetically sealable patchcords with metal solder, the HGSMJ/HGMMJ/HGPMJ series of hermetically sealable patchcords with glass solder or the VGA series of V-Groove assemblies, thus aiding in the development of photonic devices that meet Telcordia requirements. Contact AMS Technologies for more information on your customized tapered fiber project. Key Features: Wide Wavelength Range: 400 to 2000 nm, Other Wavelengths on Demand Improved Coupling to and from Waveguides, Laser Diodes and Photodiodes Single Mode (SM), Multi Mode (MM) or Polarization Maintaining (PM) Fibers Anti Reflection (AR) Coated Endfaces Available Can be Made Based on Either Spot Size or Taper Shape Metalized Fiber Versions Available Hermetically Sealable Versions Available Other Custom Configurations Available Chisel and Wedged Shaped End Faces Available Applications: Active Component Pigtailing; DWDM Devices; Waveguide Packaging; MEMS Device Connections; Miniaturized Fiber Optic Components; Coupling to Circular or Elliptical Beam Outputs

653-1120 nm; Spectral Width 2-10 nm; Output Power 1-19 W (CW), 1.8-90 W (Pulsed); Threshold Current ≤500-3000 mA; Slope Efficiency 0.6-1.0 W/A; Forward Current 1,6-100 AToptica egleyard’s BAL series of multi mode laser diodes are high brightness, broad area laser (BAL) diodes operating multi mode spatially and longitudinally. Within the BAL series, wavelengths between 653 and 1,120 nm are available with output powers between 1 and 19 W in cw mode or even up to 90 W in pulse mode.Its high pulse energy and fast rise time makes the BAL series of multi mode laser diodes the laser source of choice for high resolution sensing applications under harsh environmental conditions. Stripe widths from 100 to 400 µm are available to optimize beam structure and power for the application.Toptica eagleyard’s hermetically sealed TO packages as well as C-mount or fiber pigtailed flat packages make such laser diodes ideally suited for applications with either demanding size restrictions or with preferred fiber pigtail handling. The output power of the fiber of a cost efficient pigtailed single emitter starts at 1 W and reaches up to 90 W peak in pulsed mode.Key Features:Broad Area, Edge Emitting Laser DiodesBroad Wavelength Range: 653 to 1,120 nmHigh Output Power: 1 to 19 W (CW) and 1.8 to 90 W (Pulsed)Hermetically SealedFast/Slow Axis CollimationTyp. Spectral Width: 2 to 10 nmStripe Width: 100 to 400 µmCavity Length: 1 to 4 mmBeam Divergence: Parallel (Slow Axis) 1.5° to 10° (FWHM), Perpendicular (Fast Axis) 0.6° to 30° (FWHM)Extreme Operating Temperature Range: -60 to +90 °CPackages: C-Mount, 9 mm TO TO with Thread, Integrated FAC/SAC, Flatpack With Window ProductWavelengthOutput PowerOperational ModePackageSpecificsBAL-0653-01000-1510-CMT02-0000653 nm1 WCWC-Mount 2 mmPowerful, High Brightness, Longitudinally Multi ModeBAL-0670-00001-1510-SOT23-0010670 nm1.5 WPulsedTO-Can 9 mmSuitable for Harsh EnvironmentsBAL-0670-00004-1510-SOT23-0010670 nm4 WPulsedTO-Can 9 mmSuitable for Harsh EnvironmentsBAL-0670-00010-1510-SOT23-0016670 nm10 WPulsedTO-Can 9 mmSuitable for Harsh EnvironmentsBAL-0808-00005-2013-SOT12-0010808 nm6 WPulsedTO-Can 9 mmSuitable for Harsh EnvironmentsBAL-0808-08000-4020-CMT04-0000808 nm8 WCWC-Mount 4 mmSuitable for Harsh EnvironmentsBAL-0808-00020-4020-FLW01-0010808 nm20 WPulsedFlatpack With WindowSuitable for Harsh EnvironmentsBAL-0808-00025-2013-SOT23-0016808 nm25 WPulsedTO-Can 9 mmSuitable for Harsh EnvironmentsBAL-0905-00010-1040-TOE02-0010905 nm12 WPulsedTO With ThreadSuitable for Harsh EnvironmentsBAL-0905-00050-1040-TOE22-0010905 nm50 WPulsedTO With ThreadSuitable for Harsh EnvironmentsBAL-0905-00090-1040-TOE22-0010905 nm90 WPulsedTO With ThreadSuitable for Harsh EnvironmentsBAL-0980-08000-4020-CMT04-0000980 nm8 WCWC-Mount 4 mmSuitable for Harsh EnvironmentsBAL-1064-08000-4020-CMT04-00001064 nm8 WCWC-Mount 4 mmSuitable for Harsh EnvironmentsApplications: Time-of-Flight LIDAR; Laser Sensing in Missiles; Laser Ignitors of Optopyro Elements for Satellites or Launchers; Active Protection Systems; Material Processing; Medical; Solid-state Laser PumpingPlease note that TOPTICA eagleyard products are not availble from us in Denmark, Finland, Iceland, Norway, and Sweden.