TPC 300 - Peltier-Controller for TEC Cabinet Cooler

Max. Temperature +1,600 °C; Voltage 15 to 19 VAC; Current 5,8 to 7 A; Length 19, 22 mm; Width x Height 20 x 25 mm; Internal Diameter of Heat Core 2 mm NTT-AT’s CMH series of ceramic micro heaters provides temperatures of up to +1,600 °C in a very small, cylindrical volume. Powered by AC current with a power of approximately 100 W, a tubular ceramic micro-heating element with an internal diameter of 2 mm generates these high temperatures over a length of 19 (CMH-7019) or 22 mm (CMH-7022). In order to focus the heating energy in this small volume and to minimize the losses to the environment, the actual heating element is enclosed in a very high heat resistant ceramic material. An approx. 1 mm wide gap in this material on one side makes the laterally open, tubular heating element accessible from the outside. The main application of ceramic micro heaters is the processing of optical fibers, which can be inserted into the ceramic micro heater through the lateral gap. Tapering of optical fibers, for example, involves heating a small area of the fiber to a high temperature while the fiber is gently stretched as evenly as possible. This procedure reduces the diameter of fiber and core in the heated area, resulting in a tapered fiber. Another application of ceramic micro heaters is the production of fiber couplers. Key Features: Ideal for Heating-up Optical Fibers Ideal for Manufacturing of Tapered Optical Fibers or Optical Fiber Couplers Operated by Electric Current Temperatures of up to +1,600 °C Can Be Generated Precise Temperature Control Heating Element Inner Diameter: 2 mm Two Lengths Available: 19 mm (CMH-7019) and 22 mm (CMH-7022) Width: 25 mm, Height: 20 mm Applications: Heating-up Optical Fibers; Manufacturing of Tapered Optical Fibers; Manufacturing of Optical Fiber Couplers

404, 405 nm; Optical Output Power 150-1,000 mW; Threshold Current 60-320 mA; Forward Current 150-1,000 mA; Beam Divergence 6°/15°-13°/45° Ushio Europe’s HL40xxxx Series of high-performance UV laser diodes is available at wavelengths from 404 nm to 405 nm with a maximum optical output power up to 1,000 mW. These industrial-quality, reliable blue violet laser diodes offer high power and low operating current, a long lifespan and high energy efficiency. All Ushio Europe UV laser diodes are RoHS-compliant. Key Features: High Optical Output Power: 150 mW to 1,000 mW Customised Specifications High Efficiency Low Operating Current TE Mode Oscillation  Part Number 1) Wavelength Optical Output Power Internal Circuit 2) Threshold Current Operating Current Beam Divergence Parallel to Junction Beam Divergence Perpendicular to Junction Downloads HL40041MG 404 nm 150 mW CC 60 mA 150 mA 13° 45° Datasheet HL40053MG 400 mW FN 110 mA 370 mA 13° 42° Datasheet HL40071MG 405 nm 300 mW CC 50 mA 280 mA 6° 15° Datasheet HL40063MG 600 mW FN 140 mA 600 mA 13° 42° Datasheet HL40065MG 600 mW BC 140 mA 600 mA 13° 42° Datasheet HL40033G 1,000 mW FN 320 mA 1,000 mA 13° 42° Datasheet HL40085G 1,000 mW BC 320 mA 1,000 mA 13° 42° Datasheet 1) Last 1 or 2 Letters Display Package Size - G: f9.0 mm, MG: f5.6 mm 2) Internal Circuit Pin Assignment - CC: LD Cathode Common (Flange), PD Anode Common; FN: LD Electrode Isolated From Common (Flange), no PD; BC: LD Cathode Common (Flange), PD Cathode Common Applications: Medical; Displays; Defence & Security; Machine Control; Barcode Scanning; Consumer Products; Automotive; Semiconductor Manufacturing, Other

Temperature control TRP 260 – Article number: 45 TRP 260 Supply voltage: 24 V DC Max. switching capacity : 16 A (bei 24V DC) Temperature range: 0 bis +60°C Measuring and indicating accuracy: 0,5°C Hysteresis for heating and cooling : 0,5 bis 9,5°C separately adjustable Display:  4 Digit  7 Segment LED 2 temperature sensors (digital) : Dallas 18S20 (cable length 1 m.) Fault message contact: Relay contact, NO relay Protection class: IP 40 Dimensions: 70,5 x 96 x 42 mm Temperature control: Program 1: on-off control on-off control 2nd sensor for monitoring the warm or cold side Program 2: difference control 2nd sensor for control, governed by external temperature 

Copper Fins; Stainless Steel Tubes; 148.8x266.7x46.5 mm; 12-pass; 60 bar Water-to-air heat exchanger main dimensions HX housing: 148,8 mm x 266,7 mm x 46,5 mm Tubes and tube connections: stainless steel 316L, OD 3/8" Connection tube length 53 mm 12-pass, return-bends welded Corrugated copper fins; thickness 0,12 mm, 18 fpi HX housing and end plates: stainless steel 304/316L HX housing including fan mount for 2 fans, with M4 cage-nuts/press-nuts Specified fluid pressure: max. 60 bar  

Receptacle Style; 375 to 2000 nm; Wavelength Accuracy ±5 to ±30 nm; Coupling Efficiency 10% to 75%; Fiber Type SM, MM or PM OZ Optics’ HULD series of receptacle style laser diode to fiber couplers is offering optimum coupling in a small, rugged package. The couplers may be purchased prealigned, with the diode already in place, or as a kit that can be assembled by the customer using their own diode. The complete assembly procedure is quite straightforward. An assembly and operating instruction video on a USB drive, showing the alignment process, is available. In addition, a complete alignment kit is available, which includes the laser diode collimation wrench, multimode fiber assembly, centering lens, and video instructions. Diode source couplers are available for a variety of diode case sizes, and for diode wavelengths from 375 nm to greater than 2000 nm. These source couplers work with MM, SM and PM fiber. HULD connector receptacle style couplers have a female receptacle, such as NTT-FC, or AT&T-ST, etc. at the output end. This allows the user to connect any optical fiber with a matching male connector to the diode. HULD laser diode to fiber couplers are available in different diameters from 0.79 inch to 1.3 inch. These tilt adjustable source couplers can be used over a temperature range of -25 °C to +60 °C and have been vibration tested. Higher temperature versions are available on request OZ Optics also offers special, low cost, miniature receptacle style laser diode to fiber couplers for OEM applications. These packages use just a single lens to couple light from the laser diode into the fiber. They do not use OZ Optics tilt adjustment technique. This package features a compact, rugged housing, at a lower cost. A variety of options like a built-in isolator, a blocking screw to attenuate the output beam as well as polarizers or polarization rotators in the middle are also available. Key Features: 375nm to 2000nm Variety of Standard Packaging Options SM, MM or PM fiber Rugged Design Custom Design for Diodes High-power Version Applications: Fiber Optic Communications; Optical Alignment Systems; Process Control; Optical Sensors; Medical Apparatus; Imaging Systems ; Test and Measurement Systems