SSF213 Series Horizontal Float Switches

Compact Vapor Compression Chillers; Cooling Capacity 450-1000 W @+25°C; Single and Twin Versions; 1 to 5.5 l/min; Temperature Stability ≥±0.05K; Interface USB/Serial, Ethernet AMS Technologies’ mRC-KITs are “mini Recirculating Chiller” development kits for creating particularly compact compressor-based water cooling systems. All mRC-KIT versions feature vapor compression circuits and closed, pressurized recirculating water circuits. On the refrigeration side, miniature rotary compressors as well as customized condensers and evaporators are utilized to reduce the size. The compressor’s BLDC motor is speed controlled by an inverter, eliminating annoying switching noise of hot gas bypass known from ON/OFF compressors. Throughout its speed range, the compressor twin pump design offers low vibration and low noise. Compact centrifugal pumps on the water circuit side also contribute to the compact size Since the water circuit is pressurized, the mRC-KITs manage with very small tanks – without the risk of cavitation in the smoothly operating centrifugal pumps. Overpressure on the cooling system also prevents the ingress of bacteria and oxygen and thus extends the maintenance intervals. While mRC-C-450-24-KIT and mRC-C-450-100/240 feature full chiller power and up to 450 W cooling capacity in a shoe box form factor, DmRC-C-900-100/240-KIT provides two independent water cooling systems in a 19-inch rackmount insert, which can provide a combined maximum cooling capacity of 900 W – either with each circuit cooling two heat loads independently of each other or with both circuits coupled in series, if only one circuit is needed. Our mRC-KITs are available either with a 24 VDC or with a 90 to 264 VAC wide-input-range power supply. The mRC-C-1000-100/240 can also be shipped as a 24V option to target OEM integration applications, that need a cooling capacity of around 1000W and where noise and vibrations are an issue. Automatic fill and drain: Using automatic air and water pump technology integrated into the unit, the cooling water in the tank and pipe system of the mRC-KITs can be easily filled and drained at the push of a button – without the need for time-consuming tilting or removing the unit or the tank from the system and avoiding annoying spills or leaks. mRC Recirculating ChillersIn addition to our mRC-KITs, AMS Technologies provides two recirculating chillers that are CE certified and available from stock. mRC-C-450-100/240 provides up to 500 W cooling capacity, while mRC-C-1000-100/240 features a more powerful compressor, capable of cooling capacities up to 1000 W. Both systems come with an integrated 90 to 264 VAC wide-input-range power supply.  IoT ready: An integrated Ethernet interface allows access to system parameters of the mRC recirculating chillers as well as remote control of the cooling systems via a web browser. Your customized mRC-KIT: For customer requirements that cannot be covered by mRC-C-450-24-KIT, mRC-C-450-100/240 or DmRC-C-900-100/240-KIT, our thermal management specialists at AMS Technologies are happy to develop a completely tailor-made solution and offer all services from development and proof-of-concept all the way to series production. Contact us now to discuss your customized mRC-KIT! Key Features: Recirculating Water Chilling Kits Ideal for Water Cooling Tasks up to 1000 W Cooling Capacity (Twater +25°C, Tambient +35°C) High Cooling Capacity in Compact Format, Easy to be Integrated in Customer Application 24 VDC and 100 to 240 VAC Derivatives Available Temperature Stability: Down to ±0.05 K Flow Rate: 0.5 bar @ 5.5 lpm (standard), 5 bar @ 5 lpm (optional) Smooth, Low-noise Operation with Low Vibration Automatic Fill & Drain PID Parameters and Fan Speed Adjustable Interfaces: USB/Serial, Ethernet (IoT Enabled) Applications: Water Cooling of Lasers and Other Applications; Integration of Water Cooling Capabilities up to 1000 W in Systems with Limited Space

The Ray1 and Ray1 EX SWIR cameras from Ray Imaging Solutions Ltd. are compact, high‑performance imaging solutions designed to deliver reliable short‑wave infrared (SWIR) data in demanding environments. Built around advanced colloidal quantum dot sensor technology, these cameras combine wide spectral sensitivity, integrated thermal management, and flexible software support into a robust, ready‑to‑deploy platform. Whether used in industrial inspection, scientific research, or machine vision systems, the Ray1 family offers a powerful balance between performance, usability, and form factor.Both models are engineered for seamless integration. With integrated cooling, standardized mounts, and common development interfaces, the Ray1 and Ray1 EX reduce the time and effort required to move from evaluation to deployment. The standard Ray1 covers the core SWIR band up to 1,700 nm, while the Ray1 EX extends sensitivity to 2,200 nm, enabling imaging capabilities well beyond visible and near‑infrared systems.Key featuresQuantum dot SWIR sensor technology The Ray1 series utilizes colloidal quantum dot sensor technology to deliver high sensitivity across the SWIR spectrum. This approach provides excellent performance at a competitive size and cost, making advanced infrared imaging accessible for a wide range of applications.Two spectral configurations for different needs The Ray1 offers sensitivity from 900 nm to 1,700 nm, ideal for standard SWIR inspection and imaging tasks. The Ray1 EX extends the wavelength range to 2,200 nm, enabling detection of additional material properties and phenomena that are invisible at shorter wavelengths.High‑quality VGA imaging Both cameras feature a VGA resolution of 640 × 512 pixels with a 15 µm square pixel size and a sensor area of 9.68 × 7.68 mm. With over 99.9 % operating pixels and a dynamic range of 65 dB, they provide clean, detailed images suitable for quantitative analysis.Integrated lens and flexible optics The Ray1 includes an integrated 25 mm lens with an adjustable f‑number from f/1.4 to f/22, delivering flexibility in depth of field and light control. A C‑mount interface and support for multiple lens options allow system designers to tailor the field of view and working distance, from close‑range inspection at 0.3 m to infinity.Thermoelectric cooling for stable performance An integrated thermoelectric cooler (TEC) minimizes dark noise and stabilizes sensor performance across varying temperatures. This is especially important for long measurement sessions and low‑light SWIR applications where image consistency is critical.Compact, rugged design With camera dimensions of just 68 × 70 × 60 mm, the Ray1 family fits easily into space‑constrained systems. The aluminum housing provides durability and efficient heat dissipation. The Ray1 configuration weighs approximately 665 g with lens, while the Ray1 EX weighs around 520 g.Efficient power and data interfaces Both models operate from a 12 V DC supply and consume approximately 5.5 W with TEC enabled. Data transfer is handled through USB 3.0 Micro‑B, supporting frame rates of up to 20 fps for responsive imaging and analysis.Cross‑platform software support Ray Imaging Solutions provides an SDK supporting C++, C#, and Python, ensuring easy integration into existing software environments. The cameras are compatible with Windows, Ubuntu, and NVIDIA Jetson platforms, making them suitable for both desktop and embedded systems.ApplicationsIndustrial inspection and process control, Semiconductor and electronics analysis, Scientific research and laboratory imaging, Security, surveillance, and environmental sensing What’s next?The Ray1 and Ray1 EX cameras are designed as long‑term platforms that can evolve alongside your application. Users can start with a standard configuration and later expand capabilities through alternative optics, embedded deployment on platforms such as NVIDIA Jetson, or integration into multisensor systems. As quantum dot technology continues to advance, Ray Imaging Solutions is well positioned to support future enhancements in sensitivity, efficiency, and software functionality.For developers, integrators, and researchers looking to unlock the advantages of SWIR imaging in a compact and accessible form, the Ray1 and Ray1 EX provide a strong foundation today—and a flexible pathway for innovation tomorrow.