SMFHA Hermetic SM Optical Fiber

Aluminium Coated, Single Mode, Multi Mode; 190 to 2400 nm; Core Diameter 50 to 400 µm; Mode Field Diameter 4.3, 9.0 µm; Cladding Diameter 125 to 440 µm; Numerical Aperture 0.12 to 0.275 Fiberguide’s AFS-A/SFS-A/AGI-A/ASI-A/UVS-H2A series of aluminium coated fibers are designed for a wide temperature range (-269 to +400 °C) and superior strength (>100 kpsi). This allows for long life at extended stress levels in applications that require tight bends. Also, the strong chemical bond between the silica cladding and the aluminum enables direct termination without pistoning. This bond also makes aluminium coating the ideal choice to preserve deep UV performance in Fiberguide’s Solarguide UVS-H2A series of solarization resistant UV multi mode fiber. Within this series of aluminium coated high temperature fibers, users find step index (AFS/SFS, UVS-H2) and graded index (AGI) multi mode fibers as well as anhydrous silica (ASI) single mode fibers. As an option, some types of aluminium coated high temperature fibers can be provided with a broad selection of shaped tips – standard configurations as well as custom designed shapes. Shaped tip fibers provide optimum control over beam delivery and/or increased efficiency of light collection. Some of the fibers can also be end capped to achieve higher coupled power into a fiber core by reducing the power density at the air / silica interface, commonly the point of laser damage. End cap diameters and lengths are offered for select numerical apertures and fiber cores size, but can be easily customized for a variety of fiber types and specialized applications. Additionally, all fiber types can be equipped on demand with Fiberguide’s patented RARe Motheye anti-reflective technology that enhances fiber transmission performance and significantly increases the damage threshold for your application over a large wavelength range. Key Features: Multi Mode (Step/Graded Index) or Single Mode Fibers Pure Fused Silica Core, Fluorine Doped/Pure Silica Cladding Coating: Aluminium Core / Cladding Sizes: 50/125 to 400/440 µm (MM) Mode Field Diameter / Cladding Sizes: 4.3/125, 9.0/125 µm (SM) Numerical Aperture (NA): 0.12 to 0.275 Recommended Bend Radius: Short Term 100 x Clad Diameter, Long Term 200 x Clad Diameter 100% Proof Test Using 4-Axis Bend Method Applications: High Temperature and Cryogenic Temperature Sensing; Semiconductor Manufacturing; Corrosive and Caustic Environments; Ultra-high Vacuum Devices; Radiation Resistant Sensors; Rocket, Turbine and Jet Engine Monitoring

Gold Coated, Single Mode, Multi Mode; 190 to 2400 nm; Core Diameter 50 to 400 µm; Mode Field Diameter 4.3, 9.0 µm; Cladding Diameter 125 to 440 µm; Numerical Aperture 0.12 to 0.275 Fiberguide’s AFS-G/SFS-G/AGI-G/ASI-G series of gold coated high temperature optical fibers is designed to achieve the widest temperature range (-269 to +700 °C) of any optical fiber on the market. This, combined with excellent corrosion resistance, and the fiber’s ability to be soldered or brazed, makes it the ideal fiber for many high temperature applications such as turbine flame monitoring, oil and gas down-hole sensing, and high vacuum or pressure applications. As an option, some types of gold coated high temperature fibers can be provided with a broad selection of shaped tips – standard configurations as well as custom designed shapes. Shaped tip fibers provide optimum control over beam delivery and/or increased efficiency of light collection. Some of the fibers can also be end capped to achieve higher coupled power into a fiber core by reducing the power density at the air / silica interface, commonly the point of laser damage. End cap diameters and lengths are offered for select numerical apertures and fiber cores size, but can be easily customized for a variety of fiber types and specialized applications. Additionally, all fiber types can be equipped on demand with Fiberguide’s patented RARe Motheye anti-reflective technology that enhances fiber transmission performance and significantly increases the damage threshold for your application over a large wavelength range. Key Features: Multi Mode (Step/Graded Index) or Single Mode Fibers Pure/Germanium Doped Fused Silica Core, Fluorine Doped/Pure Silica Cladding Coating: Gold Core / Cladding Sizes: 50/125 to 400/440 µm (MM) Mode Field Diameter / Cladding Sizes: 4.3/125, 9.0/125 µm (SM) Numerical Aperture (NA): 0.12 to 0.275 Recommended Bend Radius: Short Term 100 x Clad Diameter, Long Term 200 x Clad Diameter 100% Proof Test Using 4-Axis Bend Method Applications: Turbine Flame Monitoring; Oil and Gas Down-hole Sensing; High Vacuum Applications; High Pressure Applications

Single Mode; 633 to 680, 1310 nm; Mode Field Diameter 4.3, 9.0 µm; Cladding Diameter 125 µm; Coating Acrylate, Polyimide, Aluminium, Gold; Numerical Aperture 0.12 Fiberguide’s ASI series of silica core, silica clad, polymer or metal coated single mode fibers is used in data transmission applications as well as photonics applications where a single optical path, or mode, is desired. The ASI fiber series is available with acrylate (-Y) coatings and also high performance Polyimide (-T), aluminium (-A), and gold (-G) coatings that allow these fibers to exceed the temperature performance levels of standard fibers. Additionally, the ASI series fibers can be equipped on demand with Fiberguide’s patented RARe Motheye anti-reflective technology that enhances fiber transmission performance and significantly increases the damage threshold for your application over a large wavelength range. Key Features: Single Mode Fibers Germanium Doped Fused Silica Core / Pure Fused Silica Cladding Mode Field Diameter / Cladding Sizes: 4.3/125 µm, 9.0/125 µm Wavelengths: 633 to 680 nm (4.3/125 µm), 1310 nm (9.0/125 µm) Numerical Aperture (NA): 0.12 Coatings: Acrylate, Polyimide, Aluminium, Gold Recommended Bend Radius: Short Term 100 x Clad Diameter, Long Term 200 x Clad Diameter 100% Proof Test Using 4-Axis Bend Method Applications: Data Communications; Laser Systems; Medical Applications; Oil & Gas Down-Hole Sensing; Photonic Devices; Optical Sensor Systems

1310, 1550 nm; Mode Field Dia. 8.6, 9.65 µm; Cladding Dia. 125 µm; Acrylate Coating; Optional Hermetic Layer; -60 to +180 °C  Equipped with mid-temperature acrylate-based coatings, the Corning® ClearCurve® series of single mode (SM) bend insensitive optical fibers now includes higher temperature capability. For use at temperatures up to +180 °C and beyond, these fibers deliver the best macro bend performance in the industry with ease of use and handling – benefiting sensing systems operating in harsh environments. The ClearCurve single mode fiber series includes the SMBI-5-XMT fiber with mid-temperature acrylate coating as well as the SMBIH-5-XMT fiber with mid-temperature acrylate coating and an additional hermetic layer. For mid-temperature multi mode fibers please refer to Corning’s ClearCurve multi mode fiber series. Key Features: Acrylate-base for Ease of Handling Rated for up to +180 °C Test data available at +200 °C Hermetic Coating (Optional) for Protection Against Hydrogren-induced Attenuation Increase and Improved Fatigue Resistance Consistent Strength Over Time at Elevated Temperatures Designed to Meet Your Small Bend Needs: Recommended Min. Bending Radii of 5 mm Fully Compliant With ITU-Recommendations G.657 and G652.D Compatible with Corning® SMF-28e® and SMF-28e+® Fibers Applications: Fiber Sensing and Data Transmission with Tight Bend Requirements for: Aerospace & Defense, Medical, Structural Health Monitoring, Down-Hole Drilling

1550 nm; Mode Field Dia. 9.65 µm; Cladding Dia. 125 µm; Dual Acrylate Coating; Rec. Bend Radius 10 mm; Cutoff Wavelength ≤1450 nm Corning’s ClearCurve® Photonic special single mode (SM) fiber satisfies the need of photonic component manufacturers for a single fiber optimized to provide low bend loss, tight geometrical control, high mechanical reliability and good coupler performance. It has been specially designed to meet the growing demands for smaller footprints. Corning’s patented ClearCurve® technology gives the fiber an ultra-low bend loss performance. Created with tighter geometrical and mechanical specifications, this fiber enables consistent, reliable, and low loss splicing. ClearCurve® Photonic fiber was developed with an optical profile ideal for making couplers. Corning’s ClearCurve® Photonic specialty single mode optical fiber is optimized for use in photonic components, paving the way for you to reliably and consistently enable information to go faster, further, and “smarter” in a smaller space. Key Features: 10 mm Bend Radius Low Bend Loss Tighter Geometrical Control High Reliability Enhanced by 200 kpsi FBT Coupler Friendly Applications: Designed Specifically for Photonic Components in Small Package Sizes like Fiber Couplers; Very Tight Bend Requirements

Proof test: 100 kpsi. Bend insensitive, high index single mode specialty optical fibers. Key optical specifications Operating Wavelength (nm)  > 780 Cutoff Wavelength (nm)  720 ± 50 Maximum Attenuation (dB/km)  4.3 @ 780 nm    3.0 @ 850 nm  Mode-field Diameter (µm)  4.6 ± 0.5 @ 780 nm    5.0 ± 0.5 @ 850 nm             Key geometric, mechanical and environmental specifications Cladding Outside Diameter (µm)  125 ± 0.5 Coating Outside Diameter (µm)  245 ± 10 Core-to-Cladding Offset (µm)  ≤ 0.3 Standard Lengths  500 m, 1 km, 2 km, 5 km, 10 km Proof Test (kpsi)  100 Operating Temperature (°C)  -60 to 85           Performance characterizations* Nominal Delta (%)  0.45 Numerical Aperture  0.14 Refractive Index Value-Core  1.463 @ 651 nm Bendloss (20 mm O.D.; 850 nm) (dB/turn)  < 0.05  Dispersion (ps/nm/km)  -132 @ 780 nm    -99 @ 850 nm Core Diameter (µm)  4.0             * Values in this table are nominal or calculated values

Proof test: 100 kpsi. Bend insensitive, high index single mode specialty optical fibers. Key optical specifications Operating Wavelength (nm)  > 980 Cutoff Wavelength (nm)  930 ± 40 Maximum Attenuation (dB/km)  ≤ 2.5 @ 980 nm    ≤ 1.0 @ 1550 nm  Mode-field Diameter (µm)  4.0 ± 0.3 @ 980 nm    6.3 ± 0.3 @ 1550 nm             Key geometric, mechanical and environmental specifications  Cladding Outside Diameter (µm)  125 ± 0.5 Coating Outside Diameter (µm)  245 ± 10 Core-to-Cladding Offset (µm)  ≤ 0.3 Standard Lengths  500 m, 1 km, 2 km, 5 km, 10 km Proof Test (kpsi)  100 Operating Temperature (°C)  -60 to 85           Performance characterizations* Nominal Delta (%)  1.0 Numerical Aperture  0.22  Refractive Index Value Core  1.472 @ 651 nm  Dispersion (ps/nm/km)  -65 @ 980 nm    -50 @ 1060nm Core Diameter (µm)  3.4           * Values in this table are nominal or calculated values Typical splice   HI 1060 FLEX   SMF-28e+®  RC SMF  ER 1550C3  HI 1060  HI 980  PM 980   Wavelength (nm)  1550 1550 1550 1550 980 980 980  HI 1060 FLEX (dB)   0.03 0.07 -- 0.03 0.06 0.04 0.09      

Proof test: 200 kpsi. Bend insensitive, high index single mode specialty optical fibers. Key optical specifications Operating Wavelength (nm)  > 980 Cutoff Wavelength (nm)  920 ± 50 Maximum Attenuation (dB/km)  2.1 @ 980 nm    1.5 @ 1060 nm  Mode-field Diameter (µm)  5.9 ± 0.3 @ 980 nm    6.2 ± 0.3 @ 1060 nm             Key geometric, mechanical and environmental specifications  Cladding Outside Diameter (µm)  125 ± 0.5 Coating Outside Diameter (µm)  245 ± 10 Core-to-Cladding Offset (µm)  ≤ 0.3 Standard Lengths**  500 m, 1 km, 2 km, 5 km, 10 km Proof Test (kpsi)  200 Operating Temperature (°C)  -60 to 85             Performance characterizations* Nominal Delta (%)  0.48 Numerical Aperture  0.14  Refractive Index Value Core  1.464 @ 651 nm  Dispersion (ps/nm/km)  -53 @ 980 nm    -38 @ 1060 nm Core Diameter (µm)  5.3           * Values in this table are nominal or calculated values

720 to >1060 nm; Core dia. 4.0 to 5.3 µm; Cladding Dia. 125 µm; Coating Dia. 245 µm; Dual Acrylate Coating; High-index, Bend Insensitive Consistent glass with excellent reliability: Corning's HI series of high-index single mode (SM) fibers is used across telecommunications, aerospace, and industrial markets in applications such as wavelength division multiplexing (WDM) couplers, splitters, and pump pigtails. The high-index fibers are manufactured with Corning's outside vapor deposition (OVD) process which results in durable, highly consistent glass and excellent reliability. When used as component pigtails, HI series fibers allow for efficient fiber coupling within photonic products. The fibers also offer reduced bend attenuation due to their high core index of refraction. Corning’s HI series of high-index single mode fibers includes products like HI 780, HI 780C, HI 980, RC HI 980, HI 1060, RC HI 1060, HI 1060 FLEX and RC HI 1060 FLEX. For more information please refer to the Corning® HI high-index SM fibers datasheets. For the HI 780 specialty fiber series, a re-engineered version, HI 780C, is available, which delivers nonadiabatic taper loss during component manufacturing. HI 780C is a coupler-optimized design that allows for steeper tapers and shorter couplers with lower losses. Key Features: Outstanding Consistency and Uniformity Patented Outside Vapor Deposition (OVD) Process Dual Acrylate Coating System Provides Excellent Protection and Superior Mechanical Robustness Excellent Geometry Control High Core Index of Refraction: 1.459 to 1.471 Efficient Coupling High Proof Test for Increased Reliability in Tight Bend Configurations High Numerical Aperture: 0.14, 0.21 RC HI 980/1060/1060 FLEX Provide 80 μm Diameter for Miniature Packaging HI 1060 FLEX Provides Ultra-low Bending Loss, Low Excess Loss, Low Splice Loss to SMF-28e+® and ER 1550C3 Fibers Applications: Photonic Products and Fused-fiber Couplers; Component Fiber for Erbium-doped Fiber Amplifiers (EDFAs), Couplers, Other Dense Wavelength Division Multiplexing (DWDM) Components; Pigtails for Pump Laser Diodes; Short Wavelength Laser and Light-emitting Diode (LED) Sources; Splitters and Combiners; Sensors and Gyroscopes; CATV Couplers; Ultra-compact Components Requiring Small Bend Radii

Gold Coated, Other Materials on Request; Fiber Type SM, MM, PM; Metalization Thickness 1.65 to 5.2 µm; Maximum Plating Length 50 mm; Operating Temperature -40 to +85 °C OZ Optics’ ME series of metalized fibers are specifically designed for optoelectronic packaging. The fiber is first coated with a layer of nickel to provide superior adhesion and a stable soldering base. The fiber is then plated with an overcoat layer of gold to provide resistance to oxidization. The result is a strong, uniform coating capable of handling the rigors of soldering and hermetic sealing. OZ Optics metalized fibers are well suited for use in assemblies that must conform to Telcordia requirements. If required, OZ Optics metalized fibers can be manufactured with masked ends. This process provides a clean, non-metalized fiber end suitable for termination with ceramic ferrules, fusion splicing or direct connection to a device and allows for an easy transformation of devices into hermetically sealed packages. Also available are custom mid-span metalization of optical fibers and metalized ribbon fibers. The mid-span configuration provides a solution for hermetically sealing in-fiber devices such as fiber Bragg gratings, optical isolators or optical filters, as well as allowing larger package devices that exceed the length restrictions of standard metalized fibers. Metalization of ribbon fibers allows for easy hermetic sealing of multiple fibers into hermetic packages that require many fibers or are being used with V-Groove assemblies. OZ Optics metalized fibers are available with Single Mode (SM), Multi Mode (MM) or Polarization Maintaining (PM) fibers. In general, OZ Optics uses polarization maintaining fibers based on the PANDA fiber structure when building polarization maintaining components and patch cords. However, OZ Optics can construct devices using other PM fiber structures. OZ Optics also carries some alternative fiber types in stock, please contact AMS Technologies for availability. If necessary, OZ Optics is willing to use customer supplied fibers to build devices. Key Features: Single Mode (SM), Multi Mode (MM) or Polarization Maintaining (PM) Fibers Easy to Solder Cleaved Enfaces Available Unplated (Masked) Ends Available Mid-span Plating Available Designed to Meet Telcordia Requirements Large Volume Manufacturing Capacity Custom Configurations Available Applications: Hermetic Feed-throughs; Integrated Optics Packaging; Diode Pigtailing

>1300 nm; Mode Field Dia. 9.2, 10.4 µm; Cladding Dia. 80 µm; Dual Acrylate Coating; Cutoff Wavelength ≤1290 nm Manufactured with Corning’s patented Outside Vapor Deposition (OVD) process and based on decades of experience in specialty fiber development, Corning® RC SMF specialty single mode (SM) fiber sets the industry standard for consistent geometric properties, high mechanical reliability and efficient splicing. This low-loss fused fiber with a cladding diameter of 80 µm is well suited for EDFA and small bend radius applications. AMS Technologies and Corning provide technical support for splicing the RC SMF special single mode fiber to fiber products with 125 µm cladding diameter. Key Features: Outstanding Consistency and Uniformity Using Patented Outside Vapor Deposition (OVD) Process Dual Acrylate Coating System Provides Excellent Protection and Superior Mechanical Robustness Ultra-tight Specifications World-class Reliability Support for Handling and Deployment Technical Support for Splicing to 125 µm Fiber Products Ultra-low Splice Loss to SMF-28e+® 80 μm Diameter for Miniature Packaging Low Bending Loss Excellent Geometry Control Applications: Low-loss Miniature Fused Devices for C-band and L-band; Ultra-compact Components Requiring Small Bend Radii; Pigtails in Bend Insensitive Applications; Sensors

450 to 700 nm; Mode Field Dia. 3.2, 3.9 µm; Cladding Dia. 125 µm; Dual Acrylate Coating; Cutoff Wavelength 400 nm Corning’s RGB 400 specialty fiber is a single mode fiber that is optimized for visible operating wavelength applications. The fiber’s short cut-off wavelength design enables single mode operation in the visible wavelength range. Outside Vapor Deposition (OVD) processing is used to fabricate this fiber, providing consistent geometric properties and high strength. In addition to exceptional performance as a single mode visible fiber, the design is also optimizied to produce low loss fused biconic tapered couplers. Key Features: Outstanding Consistency and Uniformity Using Patented Outside Vapor Deposition (OVD) Process Dual Acrylate Coating System Provides Excellent Protection and Superior Mechanical Robustness Profile Optimized for Adiabatic Taper Loss Excellent Geometry Control High Reliability Applications: Blue Lasers; Sensors; Photolithography; Red-Green-Blue Components; Couplers; Diode Pigtails; High-resolution Displays