Skip to main content

SH 150-240 Enclosure Heater

Product information "SH 150-240 Enclosure Heater"

Key features:

  • For the compensation of temperature variations inside the cabinet
  • Avoidance of water condensation
  • Equipped with either wire resistor or self-regulating PTC heating element
Manufacturer "Elmeko"
Related links of the manufacturer

Similar products

CMH Ceramic Micro Heaters
Max. Temperature +1,600 °C; Voltage 15 to 19 VAC; Current 5,8 to 7 A; Length 19, 22 mm; Width x Height 20 x 25 mm; Internal Diameter of Heat Core 2 mm NTT-AT’s CMH series of ceramic micro heaters provides temperatures of up to +1,600 °C in a very small, cylindrical volume. Powered by AC current with a power of approximately 100 W, a tubular ceramic micro-heating element with an internal diameter of 2 mm generates these high temperatures over a length of 19 (CMH-7019) or 22 mm (CMH-7022). In order to focus the heating energy in this small volume and to minimize the losses to the environment, the actual heating element is enclosed in a very high heat resistant ceramic material. An approx. 1 mm wide gap in this material on one side makes the laterally open, tubular heating element accessible from the outside. The main application of ceramic micro heaters is the processing of optical fibers, which can be inserted into the ceramic micro heater through the lateral gap. Tapering of optical fibers, for example, involves heating a small area of the fiber to a high temperature while the fiber is gently stretched as evenly as possible. This procedure reduces the diameter of fiber and core in the heated area, resulting in a tapered fiber. Another application of ceramic micro heaters is the production of fiber couplers. Key Features: Ideal for Heating-up Optical Fibers Ideal for Manufacturing of Tapered Optical Fibers or Optical Fiber Couplers Operated by Electric Current Temperatures of up to +1,600 °C Can Be Generated Precise Temperature Control Heating Element Inner Diameter: 2 mm Two Lengths Available: 19 mm (CMH-7019) and 22 mm (CMH-7022) Width: 25 mm, Height: 20 mm Applications: Heating-up Optical Fibers; Manufacturing of Tapered Optical Fibers; Manufacturing of Optical Fiber Couplers
Product number: SW10855
Manufacturer:
Flexible Heaters
Insulation Material Polyester, Polyimide, Kapton, Silicone Rubber; Operating Temperature -195-+230 °C; Max. Wattage 2-8 W/cm2; Thickness 125-1,000 µm; Lead Wires 22 AWG Neltec® provides flexible electrical heating elements and a complete thermal management solution for surface heating substrates. By combining etched foil heaters and thermal protection systems with heatsink design, Neltec® produces fully assembled and functionally tested heater units. Alternatively, a simple flexible heater mat can be supplied in any shape and almost any size, voltage and wattage with lead assemblies and connectors. These innovative and flexible Neltec® etched foil heaters incorporate: High-precision etched metal foil technology which allows electrical resistance control beyond the industry standards Thermostat, thermal fuse or thermistor control and protection Polyimide heaters, available in low moisture retention polyimide dielectric Kapton heaters, use Kapton® dielectric supplied by DuPont Polyester heaters, available in optical grade polyester dielectric Silicone rubber heaters, available in a variety of silicone rubber dielectric constructions including wearpad applications Environmentally secure multi-layer construction with operating temperature range from -195 to +230 °C Simple or complex shapes in a wide range of sizes engineered to bond direct to any surface or to custom heatsink assemblies Prototype and production quantities with rapid prototyping service available within 48 hours Special applications available in other dielectric materials (e.g. nomex) and wire wound heaters Key Features: Supply Voltage 0 to 240 VAC – For Other Voltages Please Contact AMS Technologies Insulation Material Polyester Polyimide Kapton Silicone Rubber Operating Temperature -55 to +105 °C -195 to +150 °C -195 to +150 °C -60 to +230 °C Max. Wattage 2.0 to 3.0 W/cm2 5.0 W/cm2 5.0 W/cm2 8.0 W/cm2 Overall Thickness 150 µm 125 µm 125 µm 1,000 µm Flexibility High Very High Very High Medium Flammability Ratin Flame-retardant Material Systems to UL94 V-O Available Thermal Protection On-board Thermal Fuse, Thermostat Thermistor and RTD Devices Are Available as Part of Your Thermal Management Solution Lead Wires 22 AWG, High-temperature PTFE Insulation to BS 2G210, Operating Temperature Range -55 to +200 °C, Other Specifications Available on Request Heatsink Assemblies Heaters Assembled with Pressure-sensitive Adhesive or Directly Bonded to Metal Heatsinks Installation Detailed Installation Instructions Provided Approvals UL, CE Marking, BS EN ISO 9001:2008; Product Manufactured to EN 60335-1 and EN 60950 Specifications   Applications: Surface Heating; Bond Direct to Any Surface or to Custom Heatsink Assemblies; Special Applications
Product number: SW11372
Manufacturer:
SH 400L-230 Enclosure Heater
Key features:For the compensation of temperature variations inside the cabinetAvoidance of water condensationEquipped with either wire resistor or self-regulating PTC heating element
Product number: C019193-6
Manufacturer:

€122.10*
SH 100-240 Enclosure Heater
Key features: For the compensation of temperature variations inside the cabinet Avoidance of water condensation Equipped with either wire resistor or self-regulating PTC heating element
Product number: C019201-6
Manufacturer:

€52.80*
SH 130L-230 Enclosure Heater
Key features: For the compensation of temperature variations inside the cabinet Avoidance of water condensation Equipped with either wire resistor or self-regulating PTC heating element
Product number: C019200-6
Manufacturer:

€102.30*
SH 250L-230 Enclosure Heater
Key features: For the compensation of temperature variations inside the cabinet Avoidance of water condensation Equipped with either wire resistor or self-regulating PTC heating element
Product number: C019198-6
Manufacturer:

€105.60*
SH 60-240 Enclosure Heater2
Key features: For the compensation of temperature variations inside the cabinet Avoidance of water condensation Equipped with either wire resistor or self-regulating PTC heating element
Product number: C019189-6
Manufacturer:

€40.70*