S1 Series HV Reed Relays

Cynergy 3 Components-Sensata Technologies

Product number: SW11855

Downloads

S1 Series HV Reed Relays Cynergy3 - Sensata Datasheet

Product information "S1 Series HV Reed Relays"

The S1 series is a miniature high voltage single-in-line reed relay for applications where space saving is a prime consideration.

The coil pins are positioned near the center of the relay while the contact pins are near the ends to give improved isolation between the high voltage contacts and the low voltage coil.

Key Features:

UL Approved
Miniature High-voltage Relay
Single-in-line (SIP) Package
Isolation Voltage Across Contacts: 4 kV
Isolation Voltage Contact to Coil: 5 kV
Carry Current: 2.5 A
Up to 350 V Switching Voltage
Switch Action: SPST (Form A)
Material: Rhodium
Isolation Across Contacts: 4 kV DC or AC Peak
Max. Switching Power: 100 VA
Max. Switching : 350 VDC, 300 VAC
Max. Switching Current: 1.0 A (DC or AC) Peak,
Max. DC Carry Current: 2.5 A
Lifetime Operations: 10⁹ (Dry Switching)
Max. Contact Resistance: 100 mΩ
Min. Insulation Resistance: 10¹⁰ Ω (10¹³ Ω typical)

Manufacturer "Cynergy 3 Components-Sensata Technologies"

Similar products

4 Series RF Reed Relays

Miniature Screened 3.5 A; 3.5 kV The 4 series is a highly flexible, low cost package for RF applications in the 1-30MHz band. The use of vacuum reed switches with Rhodium contacts offers high isolation voltages, low contact resistance and long operating lifetime. Additional RF screening is available to further enhance RF performance for more demanding applications. Available as Form A (SPNO), Form B (SPNC) or latching (bistable) contact configurations with switch connections via either PCB or flying lead.

Product number: SW10197

Manufacturer:

€9,999.00*

6 Series RF Reed Relays

Miniature Fully Screened 4 A; 3.5 kV The 6 series is a fully screened relay offering low RF loss and high current carrying capacity, which was developed with RF design engineers in the radio communications industry.

Product number: SW10198

Manufacturer:

€9,999.00*

D Series Flying Lead Connection HV Reed Relays

10 & 15 kV isolation; 50 W; Flying Lead Connection The very high isolation voltages of the D series, up to 15kV, are achieved through the use of high vacuum reed switches with either Rhodium or Tungsten contacts and make these relays suitable for high reliability applications such as cardiac defibrillators, test equipment and high voltage power supplies. The Rhodium contacts have low contact resistance while the Tungsten contacts can switch higher voltages.

Product number: SW10204

Manufacturer:

D Series Panel Mount HV Reed Relays

10 & 15 kV isolation; 50 W; Panel Mount The very high isolation voltages of the D series, up to 15kV, are achieved through the use of high vacuum reed switches with either Rhodium or Tungsten contacts and make these relays suitable for high reliability applications such as cardiac defibrillators, test equipment and high voltage power supplies.

Product number: SW10207

Manufacturer:

D Series PCB Connection HV Reed Relays

10 & 15 kV isolation; 50 W; PCB Connection The very high isolation voltages of the D series, up to 15kV, are achieved through the use of high vacuum reed switches with either Rhodium or Tungsten contacts and make these relays suitable for high reliability applications such as cardiac defibrillators, test equipment and high voltage power supplies.

Product number: SW10205

Manufacturer:

D Series Spade Connection HV Reed Relays

10 kV isolation; 50 W; Spade Connection The very high isolation voltages of the D series, up to 10kV, are achieved through the use of high vacuum reed switches with either Rhodium or Tungsten contacts and make these relays suitable for high reliability applications such as cardiac defibrillators, test equipment and high voltage power supplies.

Product number: SW10208

Manufacturer:

D Series Turret Connection HV Reed Relays

10 & 15 kV isolation; 50 W; Turret Connection The very high isolation voltages of the D series, up to 15kV, are achieved through the use of high vacuum reed switches with either Rhodium or Tungsten contacts and make these relays suitable for high reliability applications such as cardiac defibrillators, test equipment and high voltage power supplies.

Product number: SW10206

Manufacturer:

D-HR Series HV Reed Relays

High Insulation Resistance, High Voltage Relays - 5 kV; 7.5 kV; 10 kV & 15 kV Very high isolation voltages - up to 15kV - are achieved through the use of high vacuum reed switches with either Rhodium or Tungsten contacts and make these relays suitable for high reliability applications such as cardiac defibrillators, test equipment and high voltage power supplies. The Rhodium contacts have low contact resistance while the Tungsten contacts can switch higher voltages.

Product number: SW10210

Manufacturer:

D1 Series D Size Form C HV Reed Relays

The D1 series is a reed relay with changeover contacts which are often used in safety critical applications. The switching is achieved through the use of high vacuum reed switches with tungsten contacts. These relays are suitable for high reliability applications, such as test equipment and high voltage power supplies. These devices are PCB mount relays, although custom options may be available on request. Key Features: D Size Form C (Changeover) Relay 100 W Switching Power Changeover Contacts UL Approved PCB Mount Available With or Without Magnetic Screen Switch Action: SPCO Contact Material: Tungsten Isolation Across Contacts DC or AC: 0.75 kV Peak Isolation Contact to Coil DC or AC: 3 kV Peak Max. Switching Power: 100 VA Resistive (@ 33.3 VDC Switching Voltage) Max. Switching Voltage: 240 VDC (@ 20 VA Switching Power) Max. DC Switching Current: 3 A (@ 100 VA Switching Power and 33 VDC Switching Voltage) Max. DC Carry Current: 4 A Capacitance Across Contacts: 2.3 pF (Coil to Screen Grounded) Max. Contact Resistance. 500 mΩ (Typical) Min. Insulation Resistance: 108 Ω (Rypical) (108 ) Coil Voltage: 5 V, 12 V, 24 V Must Operate Voltage: 3.75 VDC , 9 VDC, 18 VDC Must Release Voltage: 0.5 VDC, 1.2 VDC, 2.4 VDC Resistance (±10%): 50 Ω, 340 Ω, 900 Ω

Product number: SW11851

Manufacturer:

D200 Series HV Reed Relays

200 W High Voltage Relay The D200 series combines a high power 200W switching capacity with isolation of 7kV across the contacts. This switching performance is achieved through the use of high vacuum reed switches with Tungsten contacts and make these relays suitable for high reliability applications, such as test equipment and high voltage power supplies.

Product number: SW10209

Manufacturer:

DA Series HV Reed Relays

The DA(UL) series of high-voltage reed relays is UL approved. Very high isolation voltages (up to 10 kV) are achieved through the use of high-vacuum reed switches with either rhodium or tungsten contacts and make these relays suitable for high reliability applications, such as cardiac defibrillators, test equipment and high-voltage power supplies. A choice of 5 kV, 7.5 kV and 10 kV isolation voltages is available. The rhodium contact relays have low contact resistance, while the tungsten contact relays can switch higher voltages. PCB or panel mount, via nylon studs, versions are available. Connection options for the HV include PCB, solder turret (wire wrap), flying lead and 0.25” spade terminals. Key Features: UL Approved, Normally Open, High Voltage Relays Choice of 10 kV, 7.5 kV or 5 kV Isolation Low Contact Resistance PCB or Panel Mount HV Connections via Flying Leads, Solder Turret (Wire Wrap), or 1/4” Spade Terminals Excellent AC Characteristics

Product number: SW11852

Manufacturer:

DB Series HV Reed Relays

The DB(UL) series of high-voltage reed relays is UL approved. Very high isolation voltages (up to 10 kV) are achieved through the use of high vacuum reed switches with either rhodium or tungsten contacts and make these relays suitable for high reliability applications, such as cardiac defibrillators, test equipment and high-voltage power supplies. A choice of 5 kV, 7.5 kV and 10 kV isolation voltages is available. The rhodium contact relays have low contact resistance, while the tungsten contact relays can switch higher voltages, up to 7000 V DC/AC peak. PCB or panel mount, via nylon studs, versions are available. Connection options, for the HV, include PCB, solder turret (wire wrap), flying lead and 0.25” spade terminals. Key Features: UL Approved, Normally Open, High Voltage Relays Choice of 10 kV, 7.5 kV or 5 kV Isolation Low Contact Resistance PCB or Panel Mount HV Connections via Flying Leads, Solder Turret (Wire Wrap), or 1/4” Spade Terminals Excellent AC Characteristics

Product number: SW11853

Manufacturer: