PMJ-3A3A-1300-7/125-3-1-1 PM Patch Cable

Multi Mode Patch Cables; 200-2000 nm; Fiber Type MM; Insertion Loss ≤0.2 dB; Connector Type FC/PC, SC, ST, LC, MU, E2000 For its MMJ series of multi mode (MM) patch cables, OZ Optics produces high-quality fiber optics patch cables using a variety of commercially available connectors and fibers. These patch cables offer low insertion losses, and excellent repeatability. MMJ MM patch cables can be manufactured to any specified length. An array of cable materials is available, including unjacketed fiber, 0.9 mm outside diameter (O.D) loose tube buffer, 3 mm O.D Kevlar reinforced PVC jacketing, 3 mm armored cabling, and 5 mm heavy duty armored cabling as well as 3 mm or 5 mm stainless steel armored cablings. OZ Optics offers a variety of multi mode (MM) fiber types, including telecommunication standard Graded Index (GI) fibers (50/125, 62.5/125 and 100/140 fiber sizes), and step index (SI) fused silica core fibers for high-power applications (10 µm to 1500 µm core sizes). Multi mode fibers are designed to operate well over a wide wavelength range. Their transmission range depends on the dopants used. There are low-OH fibers, which are optimized to either transmit well from 380 nm to over 1600 nm (IRVIS type), or high-OH fibers that transmit well from 280 nm to 900 nm (UVVIS type). Fibers that work at wavelengths below 280 nm and above 1600 nm are available on request. A large assortment of fiber types is available from stock. OZ Optics also offers custom cabling services for customer-provided fibers. Please contact AMS Technologies for available fiber types. MMJ MM patch cables can be terminated with NTT-FC, SC, AT&T-ST, LC, and SMA connectors, as well as other connector types. FC connectors are highly recommended for both single mode and multi mode use. They offer high precision and repeatability. SMA connectors are used mainly for very large core fibers and high-power applications. FC connectors with Super PC and angle polished (APC) end faces are available to minimize back reflection. Typical back reflection levels are 45 dB for Super PC connectors and 60 dB for APC connectors. For high-power multi mode (MM) patch cables, please refer to OZ Optics’ QMMJ series. Key Features: Low Insertion Loss (IL): <0.2 dB Excellent Repeatability Connector Type: FC/PC, SC, ST, LC, MU, E2000 Custom Ferrule Termination Available Designed to Meet Telcordia Specification Large Selection of Cabling Operating Wavelengths: 200 nm to 2000 nm Core Size Diameters: 2 µm to 1500 µm Low- and High-Numerical-Aperture Fibers Dielectric Anti-Reflection (AR) Coatings Available Applications: High-speed (10, 40 GBit/s) Telecommunications; Interferometric Sensors; Integrated Optics; Fiber Amplifiers; Laser Detection and Display; Materials Processing

1460-1625 nm; 1450 nm Cutoff Wavelength; Ø3 mm, blue, PVC Jacket; FC/APCs; 1 m Cable Length The PMJ-3A3A-1550-8/125-3-1-1 polarization maintaining fiber patchcord is terminated with angle FC/APC connectors on both ends that are pre-aligned and locked on the slow axis. The PM patch cable is 1 m long and 3 mm OD jacketed.

1290-1550 nm; 1280 nm Cutoff Wavelength; Ø3 mm, blue, PVC Jacket; FC/APCs; 2 m Cable Length The PMJ-3A3A-1300-7/125-3-2-1 polarization maintaining fiber patchcord is terminated with angle FC/APC connectors on both ends that are pre-aligned and locked on the slow axis. The PM patch cable is 2 m long and 3 mm OD jacketed.