PBS, PMS, PMFS PM Splitters

Gooch & Housego’s FFW-X wavelength division multiplexers (WDMs) are single mode (SM) optical fiber components and modules. They enable two or three wavelengths to be combined or separated. For the FFW-X series, Gooch &Housego (G&H) utilizes low-loss fused fiber technology – no light leaves the fiber and therefore no alignment is required and there are no unwanted reflections. Furthermore, the output fiber pigtails may be directly integrated into beam delivery systems. These high-performance parts are available in many wavelength configurations (including a duplexing version), fiber and connector options, with standard as well as subminiature packages. They can therefore be readily specified in a wide variety of applications, enabling rapid design cycles and new project builds. Visible Wavelength Combiners:Designed for applications in display systems, sensors and biomedical equipment, G&H’s FFW-xxxxxxxxx single mode visible wavelength fused fiber combiners enable any two or three primary colors in the visible wavelength region to be combined or separated. Visible wavelength combiners are available for either two (red/green, blue/green, red/blue light) or three wavelengths, providing full RGB operation and enabling full color displays. All variants are available on a custom basis, so please contact AMS Technologies to discuss your specific requirements. Near Infrared WDMs:Designed for applications in fiber laser, sensing, biomedical, military and avionics, the FFW-xxxxxxxxx near infrared WDMs enable the low-loss combining or splitting of a pair of wavelengths within the 700 nm to 1199 nm region. G&H can rapidly produce such custom WDMs, with typical minimum wavelength separation of 50 nm. Specific applications could include combining two sensor wavelengths onto one fiber, splitting laser harmonics, or combining wavelengths in fiber lasers. WDMs for 2 µm Operation:Gooch & Housego’s FFW-xxxxxxxxx fused WDMs for 2 µm operation combine multiple wavelengths of light in single mode (SM) fiber whilst maintaining low loss. G&H proprietary manufacturing technology provides low loss with low polarization dependence (PDL). The all-fiber construction offers excellent reliability and high power handling characteristics. These high-performance parts are available in many wavelength configurations, housing, fiber and connector options and can therefore be readily specified in a wide variety of applications, enabling rapid design cycles and new project builds. Duplexing WDMs 1310/1550 nm & 1625 nm (FFW-4xxxx11xx):G&H’s FFW-4xxxx11xx series of duplexing WDMs enable the low-loss combining or splitting of a pair of wavelengths. 1310 nm/C band or 1310 nm/L band components are used to double network bandwidth whilst the 1310/1625 nm component is used to add or drop a supervisory wavelength from a system. G&H proprietary manufacturing technology provides uniquely low excess loss and wavelength dependence along with low polarization and temperature dependence for all ports. In addition to the standard wavelengths, other combinations such as 1550/1625 nm are available. Please contact AMS Technologies with your specific requirements. FFW-X SM Pump Signal WDMsGooch & Housego’s FFW-X single mode (SM) fused pump signal wavelength division multiplexers (WDMs) are used for multiplexing signal and pump power in erbium-doped power amplifiers, pumped by wavelengths from 960 to 1480 nm. Proprietary manufacturing technology provides uniquely low excess loss, along with low polarization and temperature dependence for all ports. The ultra-low loss of these components promotes high efficiency of use of pump power and low noise figure. Fused Pump Signal WDMs 980 nm (FFW-xxxxx2xxx):G&H’s FFW-xxxxx2xxx series of fused pump signal WDMs, 980 nm, multiplex signal and pump power in 980, 960 or 1060 nm-pumped erbium-doped fiber amplifiers. Wavelength configurations allow for 960, 980 or 1060 nm pumping and C, L or C+L signal bands. Reliability is assured through qualification to Telcordia GR-1221, with a field proven FIT rate of <1. Fused Pump Signal WDMs 1480 nm (FFW-3xxxx21xx):The Gooch & Housego FFW-3xxxx21xx series of fused pump signal WDMs, 1480 nm, multiplex signal and pump power in 1480 nm-pumped erbium-doped fiber amplifiers. Wavelength configurations are 1480 nm – C band and 1480 nm – L band. Subminiature Pump Signal WDMs (FFW-5x1xx2xx0):G&H’s FFW-5x1xx2xx0 series of subminiature pump signal WDMs provide low-loss multiplexing of pump and signal in an ultra-short 32 mm length package. Designed for space-constrained optical amplifiers, the product is manufactured using ø80 µm cladding fiber. This enables low fiber bend radius without compromising mechanical integrity. Key Features: Combining or Separating Two or Three Wavelengths Wide Range of Regular Parts Available Custom Wavelength Capability All Fiber – No Lens Alignment Low or Ultra-low Light Loss No Unwanted Reflections High Power Handling Custom Designs Available Key Features FFW-X SM Pump Signal WDMs: Promotes Low Amplifier Noise Figure Promotes Low Pump Power Wastage Ultra-low Excess Loss: <0.05 dB Typical C, L or C+L Signal Bands Wide Range of Regular Parts Available Miniature Versions (32 mm Package Length) Available High Power Handling Telcordia GR-1221 Compliance (980 nm, Subminiature) Proven Reliability Applications: Fiber Lasers; Sensors, Biomedical Equipment; Research; Visible and Display Systems; Avionics; Defense; Telecoms; Optical Networking; Instrumentation; IR Imaging; Industrial, IR Counter Measures; C, L or C+L Band EDFAs; C or L Band Pump/Signal Multiplexing; 960, 980, 1060 or 1480 nm Pump Rejection; Fiber Gyros; Sensors

Component Type; 780-1550 nm; Number of Legs 1x2, 2x1, 2x2, 1x3; Return Loss ≥50 dB; Power Handling ≤300-≤2000 mW; Fiber Type Panda PM, Fibercore HB-800C, SM LightComm Technology uses unique fusing technique and polarization maintaining fiber to build its broad range of polarization maintaining (PM) fused couplers/combiners. The coupling ratio and/or wavelength can be selected according to customer’s request. The devices feature low excess loss, small size and high polarization extinction ratio, high power handling and high isolation. LightComm Technology’s range of PM fused couplers/combiners is widely used for optical sensors, (fiber) optical gyros, optical amplifiers and EDFA. PMC Series fused PM couplers are available with 1x2, 2x2 and 1x3 ports, including a version with 80 µm fiber for 820 nm. The PMWBC wideband PM couplers allow for an operating wavelength band of ±40 nm. LightComm Technology’s FPC Series fused PM combiners are widely used for EDFA. LightComm Technology’s PBC series of polarization beam combiners are micro optics devices that can combine two polarized light signals into one output fiber. The typical configuration of PBC uses two PM fibers for input and one SM fiber for output. The PBC series is the ideal choice for application in EDFA, Raman amplifier, pump lasers, high speed communication systems and optical fiber sensors. Key Features: Low Excess Loss Low Insertion Loss Small Size High Polarization Extinction Ratio Excellent Stability and Reliability Applications: Optical Sensors; Optical Gyros; Optical Amplifiers; EDFA; Raman Amplifiers; Optical Communications; Laboratory R&D