OPM-200 Digital Directional Inline Optical Power Monitor/Meter

Single and Dual Source; 633-1625 nm; Reflectance Dynamic Range -1--70 dB; Fiber Type SM, MM; 8° Angled NTT-FC/APC Receptacle OZ Optics’ BM series of backreflection meters measure the total accumulated optical return loss that is reflected back through a device or fiber under test. The measured reflections are caused by Rayleigh scattering, sudden changes in the refractive index within the device under test (DUT), or from connector ends. BM series meters are available as portable handheld devices (BM-100 and BM-200) or in a benchtop form factor (BM-1000 and BM-2000). The BM series backreflection meters are configured with an FC/APC connector on the output port, to minimize unwanted reflections. The meters have either one or two built-in laser diodes (plus a choice of SLEDs or LEDs for benchtop models) for return loss measurement at specific wavelengths. An optional detector can be added to the unit for insertion loss measurements. Reference patchcords for calibration are available. BM series meters cover a wide range of available wavelengths, thus providing measurement  capabilities for non-telecom applications as well as telecom. BM-100/200 portable meters' wavelengths range from 8050 nm to 1625 nm, while the BM-1000/2000 benchtop meters are offered with special wavelengths, ranging from 633 nm to 1625 nm. The BM-1000/2000 benchtop backreflection meters feature a colour touchscreen display with a simple graphical user interface. The units come with a built-in memory that allows the user to store measured DUT test results. The BM series backreflection meters can be operated remotely via the built-in USB interface. A universal AC/DC power supply is included with all units. Reference patch cords for calibration are available. Adapter patch cords are also available, to allow the meter to be used with devices having different connectors. Key Features MB-100/200 Handheld Backreflection Meters: Built-in Single and Dual Laser Diode Source Built-in Single and Dual Laser Diode Source Dual Wavelength Source Available Sensitivity: Down to -70 dB Wide Range of Available Wavelenghts: 850 nm to 1625 nm Reflectance Dynamic Range: -1 dB to -70 dB Built-in USB Communications Port Fiber Type: Single Mode (SM), Multi Mode (MM) Receptacle: 8" Angled NTT-FC/APC Rugged and Compact Design High Resolution Optional Insertion Loss Measurement Capability Additional Key Features MB-1000/2000 Benchtop Backreflection Meters: Unique Wavelength Offerings for Speciality Applications Wide Range of Available Wavelengths: 633 nm to 1625 nm Broadband SLED for Imprived Stability Sensitivity: Down to -75 dB Touchscreen Display Built-in Memory Applications: Backreflection Measurement of Components; OCT Device Testing; Insertion Loss Measurement; End-to-end Loss Measurement; Quality Control; New Product Development; Component or System Troubleshooting; Network Installation

1550 nm, ITU-T Channels; Output Power 10-100 mW; 260x209x90 mm; Linewidth ≤15 kHz; SMSR >40 dB; RIN <-140 dB/Hz OZ Optics' NLFOSS ultra narrow linewidth stable laser source is produced using a high-performance external cavity laser (ECL) design. The compact and robust design offers very low sensitivity to vibration, and acoustic noise. This ensures an excellent wavelength stability during device lifetime. The narrow-linewidth, bench-top module is the ideal candidate for applications such as: LIDAR, sensing, injection seeding, spectroscopy, coherent communication, or oil and gas exploration. The NLFOSS source offers an ultra-low relative intensity noise (RIN, <-140 dB/Hz @>1 KHz), as well as low phase and frequency noise. Fast wavelength tuning and power modulation are offered upon request. NLFOSS sources are available with either polarization maintaining (PM) or single mode (SM) fiber, with a minimum output power of 10 mW (higher power available upon request). Please contact AMS Technologies for details. Key Features: Single Longitudinal Mode Narrow Linewidth: ≤15 kHz High Side Mode Suppression Ratio (SMSR): >40 dB Selectable Peak Wavelength on C-band: ITU-T Channels, DWDM 100 GHz, or Custom Excellent Wavelength Stability Long Lifetime Low Relative Intensity Noise (RIN): <-140 dB/Hz @>1 KHz Wavelength Tunability: Tuning Range (Optional) 200 MHz Typ. (Sinusoidal Modulation at 10 kHz; Input Voltage 4 V P-P) High-power Versions Available Power Modulation Available Polarization Maintaining (PM) or single mode (SM) Fiber Output Available Available Wavelengths: 1550 nm, ITU-T Channels Peak Wavelength Accuracy: ±10 nm (Nominal), ±2 nm, ±40 pm ITU C-Band Optical Power: 10 mW Standard, 20 mW, 50 mW & 100 mW Available Upon Request Typ. Optical Power Stability: ±5% Frequency Stability: <±5 MHz, Free Running Over 1 h; <±30 MHz, Free Running Over 8 h Optical Isolator: >40 dB Polarization Extinction Ratio (PER): >20 dB (PM Version Only) Available Receptacles: FC/APC, Angled SC Power Supply: 100/240 VAC, 50/60 Hz Operating Temperature Range: +15°C to +50°C Dimensions: 260 x 209 x 90 mm Applications: Brillouin Distributed Temperature and Strain Sensor; Oil and Gas Monitoring, Testing, Leak Detection, Exploration Systems; LIDAR; Fiber Laser Seeding; Metrology; Test & Measurement

Wavelength 180 nm to 2000 nm; Focal Length 1.05 mm to 18.68 mm; Singlemode, Multimode & PM Fibers; Connector Options NTT-FC/PC; AT&T-ST, SC, LC/PC OZ Optics offers a complete line of fiber collimators and focusers with low backreflection, designed to collimate or focus light exiting a fiber to a desired beam diameter or spot size. These devices can be used with laser diodes, photodiodes, acousto-optic modulators and other fiber optic devices.

Integrated Power Meter, Light Source, Connector Inspection; 1260 to 1650 nm; RL Measurement Range 0 to 70 dB; Power Measurement Range -85 to +15 dBm; Light Source Output Power -3 to -9 dBm; Source Modes CW, Tone, Auto-λ, Multi-λ; Connector Type APC, SC, FC, ST Viavi Solutions’ ORL-85/85P series of SmartClass Fiber optical return loss meters combine optical power meter (OPM), light source (OLS), continuous wave return loss meter (OCWR) and connector inspection in one versatile and compact instrument – ideal for measuring optical return loss and inspecting fiber connector end faces to verify optical connection quality. Optical systems with high-speed lasers, analog transmission (CATV), or Raman amplifiers require high return loss for maximum performance. Furthermore, optical return loss measurements can be used to prove that an installation was completed carefully and accurately; for example, they can show that the optical connectors were inspected and are clean. The ultra-sensitive power meter combined with stabilized light sources enable up to a 70 dB measurement range. The angled single-mode test port (APC) guarantees highly accurate return loss measurements without requiring external termination for up to 50 dB return loss measurements. The ORL-85/85P series is compatible with the P5000i digital analysis microscope for checking fiber end-face quality and getting pass/fail acceptance results at the push of a button. The ORL-85P features an integrated patch-cord microscope (PCM) for added value and improved workflow efficiency. Threshold settings for pass/fail indications and the intuitive touch screen user interface transforms users into instant fiber experts without the need for special training. Automatic functions, such as auto-λ and real-time multi-λ functionalities avoid handling errors and speed up test time significantly. The ORL-85/85P series are fully compatible with other members of the SmartClass Fiber family (OLS, OLP, and OLT) with these automatic functions. Users can easily save test results (power, return loss, and fiber inspection) with real-time stamp to generate certification reports. Test results can be easily uploaded to a PC for postprocessing with FiberChekPRO PC software. The ORL-85/85P inspection-ready optical return loss meters can be used anywhere today’s fiber technicians go, up poles or down holes. Technicians gain ultimate flexibility and performance from this powerful easy-to-use solution that can instantly transform any technician into a fiber expert. Key Features: Battery-operated, Field-portable Optical Return Loss Meter 1260 to 1650 nm Measurement Wavelength Range (Power Meter) Multiple Wavelengths (Source) Return Loss up to 70 dB Interchangeable Optical Adapters (Senko) for FC, SC, ST and LC Optical Connectors 3.5-in Color Touch Screen With Integrated Stylus Individual Threshold Settings for Power and Loss Pass/Fail Analysis Fiber Inspection and Test Results Storage With Time Stamp Data Transfer and Remote Control via USB or Ethernet Interface Auto-lambda and Multi-lambda Test Functions Applications: Measurement of Optical Return Loss; Measurement of Optical Power (Absolute and Relative); Measurement of Optical Insertion Loss; Inspection of Optical Connectors (IBYC)