LD6230VB Precision Molded Aspheric Lens EFL 6.20 nm; NA 0.30; CA 3.70 nm; OD 4.70 nm; VB Coating

1700-1750 nm; Output Energy ≤50 µJ; Repetition Rate ≤10 kHz; Pulse Width 2-5 ns; Pump Laser and OPO in Single Rugged Housing Our 170P0-1-50-S MID-IR tunable OPO (optical parametric oscillator) source combines pump laser and OPO in a single, rugged housing and generates laser pulses in the mid-infrared (MID-IR) range around 1700 nm – the applications for such wavelengths are mainly in the field of photoacoustic imaging, in addition to gas chromatography and other analysis tasks. The OPO’s wavelength can be tuned in an extended range from 1700 nm to 1750 nm. Other wavelength ranges (e.g. 1500 nm to 2000 nm) are available on demand. Using an electro-optical Q-switch, very short pulses with typical pulse widths of 2 ns to 5 ns are generated. If different wavelengths, repetition rates, pulse energies or pulse widths is what you are looking for, the laser experts at Elforlight (an AMS Company) are happy to specify, design and manufacture your customized OPO solution. Get in touch with us now to discuss your project’s requirements! Key Features: Tunable Wavelength Range: 1700 nm to 1750 nm (1500 nm to 2000 nm on request) Ideal for Cardiovascular Photoacoustic Imaging Pump Laser and OPO in Single Rugged Housing Operation Mode: Pulsed Pulse Width: 2 ns to 5 ns Pulse Repetition Rate: Up to 10 kHz Pulse Energy: 50 µJ @1 kHz, 30 µJ @5 kHz Beam Quality: Close to TEM00, M2 < 1.3. (Capable of Launch into Multimode Optical Fiber) Beam Profile: Circular Triggering: External Laser Pulse Trigger Option (Input Trigger Signal 5 V) Control: RS232 Interface With: Switch Laser On/Off, Set Laser Energy, Enable/Disable Emission Power Supply: 110 VAC to 240 VAC, 50/60 Hz, ~200 W Safety Features: Redundant Interlock, Warning Outputs Applications: Biomedical Photoacoustic Imaging; Gas Chromatography; Other

No. of Connectors 24-36; Resolution 0.1 °C; Accuracy ±2 °C; Max. Temperature +155 °C; Stability ±2 °C; Horizontal Curing 0°, +15°, -15°; Step-Cure Capability Connected Fibers’ patented 1Cure is the industry’s first intelligent expoxy curing oven for both horizontal and vertical curing applications. The 1Cure oven features both soak and ramp temperature profile curing capability, a 4” full-color LCD touchscreen as well as network connectivity with remote programmability and access The system stores up to 999 programs. The temperature of the actual connector fixture is monitored and controlled rather than the traditional method of monitoring the hot plate. This eliminates the temperature error created by the thermal offset between these two surfaces in a typical curing oven. 1Cure is also available with an optional advanced cooling system for reducing cycle times between ramp (step) cure profiles. The ramp cure technology eliminates fiber cracking especially on larger core fibers by utilizing ramp and soak cycles. This significant advancement is useful for large-core and multi-fiber applications. It also allows to standardize on one epoxy for various applications by customizing time and temperature profiles. The oven features a horizontal curing base with a removable 24 position fixture for MT (MPO) and a convertible lid providing cable access to a block to accommodate up to 96 single fiber termini (72 for the 1Cure-200) to cure in a vertical position. The internal 15° tilt mechanism for the horizontal cure will allow for 0° or 15° curing angle to prevent fibers from retreating during bare, buffered or ribbon fiber applications. The 1Cure is designed by Connected Fibers to meet all industry performance and safety standards providing leading technology for the heat curing process of fiber optic termini. The oven is suited for all production environments and for all industry standard connectors and ferrules with use of heat-cure epoxies, including MT (MPO) connectors. Key Features: Step-Cure Capable Cooling System Between Cycles (Optional) MT or Single-Fiber Curing Flat to Angled Internal Tilt for Horizontal Curing Precision Temperature Control Integrated Thermocouple in Fixture for Ideal Calibration Networkable for Remote Monitoring and Programming of Oven Touchscreen Interface Up to 999 Programmable Cure Schedules for Various Fiber Types Ramp Curing to Eliminate Fiber Cracking Especially in Multi-fiber or Large-core Fibers Standardize on One Epoxy Temperature Range (Hot Plate Temperature): Ambient +5 °C to +155 °C Temperature Display Resolution: 4 Digit / 0.1 °C Temperature Uniformity: ±2 °C Temperature Accuracy: ±2 °C Horizontal Curing: 0°/+15°/-15° Vertical Curing Capacity: 3 Blocks Horizontal Curing Capacity: 24 MT Ferrule, 36 LC Applications: Cable Assembly Fabrication; Medical; Military; Specialized

Aluminum fins; Copper tubes; 1 fan; 147.1x159x50.8 mm; 10-pass; 150psi/10bar max; 7.6 lpm max Water-to-air heat exchanger main dimensions HX housing: 147,1 mm x 159 mm x 50,8 mm Tubes and tube connections: Copper, OD 3/8" Connection tube length 55,8 mm Fins: Aluminum, thickness 0,15 mm HX housing and end plates: stainless steel, 1 mm without fan plate Specified for fluid pressures of at least 150psi/10bar max. 7,6 l/min water flow  

Aluminum fins; Copper tubes; 1 fan; 202.8x159x52.3 mm; 10-pass; 150psi/10bar max; 7.6 lpm max; with fan plate without connector Water-to-air heat exchanger main dimensions HX housing: 148,7 mm x 159 mm x 52,3 mm Tubes and tube connections: Copper, OD 3/8" Connection tube length 55,8 mm Fins: Aluminum, thickness 0,15 mm HX housing and end plates: stainless steel, 1 mm Including stainless steel fan plate for 1 fan, with M4 cage-nuts or press-nuts. Specified for fluid pressures of at least 150psi/10bar max. 7,6 l/min water flow  

560-610 nm; Pulse Energy >5, >50 µJ; Repetition Rate >1, >10 kHz; Min. Pulse Width <2, <5 ns; Jitter <±1 ns Our DL series of dye lasers is a compact, easy to install complement to our DPSS laser products. Designed primarily to operate with the SPOT DPSS lasers for short pulses, the dye lasers can also be combined with the FQS DPSS lasers to produce higher energies. DL series dye lasers convert the output of our pulse lasers to other useful wavelengths, whilst maintaining the benefits of short pulses and high repetition rates. The self-contained dye reservoir and pump enable operation for several weeks on one dye fill. Options of broad and narrow wavelength bandwidth (15 nm to <1 nm) are available. Key Features: Wavelengths: 560 nm to 610 nm (Other Dyes/Wavelengths Available on Request) Max. Pulse Energy: >5 µJ, >50 µJ Repetition Rate: Single Shot to >1 kHz, >10 kHz Minimum Pulse Width: <2 ns, <5 ns Jitter: <±1 ns from external trigger input (typ. 0.5 ns) Beam Diameter: ~1 mm at Output Aperture Line Width: ~4 nm Compact Size Easy to Install Common Base Plate Available for Dye/Pump System Self-contained Dye Pump Tuning Option Dye Used: Pyrromethene 597 Dimensions Dye Head: 270 mm x 122 mm x 60 mm Applications: Photoacoustic Imaging; Spectroscopy

Two recirculating chillers in one cabinet, up to 900 W cooling capacity, 24 V DC power supply The DmRC-C-900-24-KIT is a development kit suitable for applications requiring high water cooling performance in the smallest of spaces for water coolers. Based on miniature compressors, this "mini Recirculating Chiller" development kit provides two independent water cooling systems in a 19-inch rackmount insert, which can provide a combined maximum cooling capacity of 900 W. With this double chiller concept, DmRC-C-900-24-KIT can cool two heat loads independently of each other – the target temperatures for each of the two heat loads can be set individually. The compressors’ BLDC motors are speed controlled and offer low vibration and low noise throughout the speed range. Since the water circuit is pressurized, DmRC-C-900-24-KIT manages with very small tanks (2 x 275 ml) – without the risk of cavitation in the smoothly operating centrifugal pumps. Overpressure on the cooling system also prevents the ingress of bacteria and oxygen and thus extends the maintenance intervals. An electric air pump generates the pressure on the two water circuits and is also used for automatic complete filling and emptying of the cooling water circuits, simplifying the maintenance of the system. For customer requirements that cannot be covered by the DmRC-C-900-24-KIT, our thermal management specialists at AMS Technologies are happy to develop a completely tailor-made solution and offer all services from development through to series production. Specifications: Power Supply: <700 W (max. 29 A @ 24 V DC) Cooling Capacity (approximately): 900 W (2 x 450 W, TWATER +25 °C, TAMBIENT +25 °C) Temperature Range: ± 1 K (over-/undershoot at 250 W load ON/OFF), ± 0.2 K (continuous operation) Hydraulic Parameters: flow rate 1 lpm to 5.5 lpm @ 1 bar to 0.2 bar pressure drop at heat load Cabinet: rack-mount, 19”, aluminium housing Weight: 20 kg (Dry Weight: 19 kg) Dimensions (WxHxD): 440 mm x 220 mm x 350 mm (main body, without flanges)

633 nm; 0.89 mrad; BD 0.91; lens EFL 4.50; lens NA 0.55; FC/APC Do you need a customised collimator? Click here to contact us.  

Actively Q-switched DPSS Lasers; 365, 532, 1064 nm; Pulse Energy >100->400 µJ; Repetition Rate ≤10 kHz; Min. Pulse Width <4, <5 ns; Jitter <±1 ns Our FQS range of DPSS lasers builds on the very successful SPOT actively Q-switched laser technology. Adopting key technical design features, the FQS range provides a series of models delivering up to 400 µJ with pulse widths of less than 5 ns. The FQS lasers’ jitter is maintained at a low level across the range. The compact laser head can be used to pump our dye laser products to produce a comprehensive range of wavelengths. The UV variant of the FQS has been very successful as a light source for MALDI (Matrix Assisted Laser Desorption/Ionization) applications. Key Features: Wavelengths: 355, 532, 1064 nm Pulse Energy @1 kHz: >100 µJ to >400 µJ Repetition Rate: ≤10 kHz Minimum Pulse Width: <4 ns, <5 ns Jitter: <±1 ns (typ. ± 0.5 ns) WRT ext. trigger input Spatial Mode: TEM00, M² <1.2 Beam Diameter: 1 mm at Output Aperture Beam Divergence: <1 mRad at 1 mm Diameter Polarization: >100:1 Variable Power Output RS232 Control Manual Safety Shutter User Interface (Interlock, On/Off Switch) Air Cooled External Trigger Laser Diode Protection 19” Rack Power Supply Universal Mains Input: 100 to 240 VAC, 50/60 Hz Max. Power Consumption: 1000 W Dimensions Laser Head: 240 mm x 210 mm x 100 mm Dimensions Power Supply: 19 Inch Rack, 2U High Applications: Photoacoustic Imaging; MALDI Mass Spectrometry (Matrix Assisted Laser Desorption/Ionization); Pumping of Dye Lasers / OPOs / Raman Lasers; LIDAR; Micromachining

150x88.9x12.7 mm; Aluminum; Copper Tubes; 2 -PassLCP ET 88,9x12,7x150/2Pass_Cu is an aluminum cold plate combined with 2-pass copper tubes. The exclusive section shape, pressed in the base plates without glues or resins, maximizes adhesion and minimizes any thermal impedance between the tube coil and the plate, both on the straight and curved parts of the design.We can design embedded tube cold plates to be fully customized for the individual needs of each specific design, regardless of the application for which the plate is designed. Get in touch with our thermal experts to discuss your specific requirements.

150x88.9x12.7 mm; Aluminum; Copper Tubes; 4 -PassLCP ET 88,9x12,7x150/4Pass_Cu is an aluminum cold plate combined with 4-pass copper tubes. The exclusive section shape, pressed in the base plates without glues or resins, maximizes adhesion and minimizes any thermal impedance between the tube coil and the plate, both on the straight and curved parts of the design.We can design embedded tube cold plates to be fully customized for the individual needs of each specific design, regardless of the application for which the plate is designed. Get in touch with our thermal experts to discuss your specific requirements.

300x88.9x12.7 mm; Aluminum; Copper Tubes; 2 -PassLCP ET 88,9x12,7x300/2Pass_Cu is an aluminum cold plate combined with 2-pass copper tubes. The exclusive section shape, pressed in the base plates without glues or resins, maximizes adhesion and minimizes any thermal impedance between the tube coil and the plate, both on the straight and curved parts of the design.We can design embedded tube cold plates to be fully customized for the individual needs of each specific design, regardless of the application for which the plate is designed. Get in touch with our thermal experts to discuss your specific requirements.

300x88.9x12.7 mm; Aluminum; Copper Tubes; 4 -PassLCP ET 88,9x12,7x300/4Pass_Cu is an aluminum cold plate combined with 4-pass copper tubes. The exclusive section shape, pressed in the base plates without glues or resins, maximizes adhesion and minimizes any thermal impedance between the tube coil and the plate, both on the straight and curved parts of the design.We can design embedded tube cold plates to be fully customized for the individual needs of each specific design, regardless of the application for which the plate is designed. Get in touch with our thermal experts to discuss your specific requirements.