LC Simplex Adapters
REQUEST PRICING AND AVAILABILITY
- Get your individual quote.
- Technical compatibility review included.
- Volume discounts available.
No obligation. Direct access to our engineering team.
Product information "LC Simplex Adapters"
LC/PC, LC/APC; Sleeve Zirconia; Simplex; Fiber Type SM/MM/PM
Optoplast’s series of LC simplex adapters are suited for single mode and multi mode applications. Compliant with IEC 61754-20 and TIA-604-10-B specifications, they connect any single mode, multi mode or polarization maintaining fiber cable terminated with industry-standard LC Simplex Connector Kits and minimize back reflections by bringing the fibers’ cores into physical contact. The housing type is one piece, senior/senior with plastic mount plate.
Equipped with standard zirconia (single mode and multi mode) or low-loss zirconia mating sleeves (single mode), these high-quality manufactured adapters reliably align the cores of each terminated fiber, guaranteeing a very low insertion loss. After 500 connections the insertion loss variation stays below 0.10 dB. Phosphor bronze sleeves are available on request.
The body of this series of LC simplex adapters is made from PBT 20% FRP, allowing for an operating temperature from -25 to +70 °C and incorporating two tabs that snap into place when inserted into a panel with a maximum thickness of 1.7 mm. The light weight products are easy to handle and allow for fast mounting to panels with rectangular opening in various applications and environments.
The LC simplex flangeless adapters can be produced in four standard colors – blue (RAL 5015), green (RAL 6018), aqua (RAL 6027) and beige (RAL 1013). Each LC simplex adapter variant is packaged as standard in plastic blister (50 pieces each layer).
Key Features:
- Adapters/ Mating Sleeves to Align LC/PC or LC/APC Connector Terminated Fiber Cables
- Low Insertion Loss
- High Durability
- Precision Alignment Straight Split Sleeves
- Compact and Lightweight
- Easy Panel Installation
Applications: Local Area Network (LAN); Network Applications, Particularly With Single Mode Fibers
Downloads
Customers also viewed
Refractive Index 1.54; 5000 cps Viscosity at 25°C Norland Optical Adhesive 68 ("NOA68")is a clear, colorless, liquid photopolymer that will cure when exposed to ultraviolet light. Since it is a one part system and 100% solids, it offers many advantages in bonding of optical materials where the bonding surface can be exposed to light. The use of NOA 68 eliminates premixing, drying and heat curing operations common to other optical adhesive systems. Curing time is remarkably fast, and is dependent upon the thickness applied and the amount of ultraviolet light energy available.NOA 68 is designed to give improved adhesion to many plastics such as acrylic, polycarbonate and cellulose acetate butyrate. In addition to plastics, NOA 68 has good adhesion to glass and metals and can be used to bond combinations of the three. Suggested uses for NOA 68 include bonding compound plastic lenses, laminating polarized film between glass or plastic, mounting plastic lenses in metal or plastic mounts and bonding cover glasses.Typical Properties of NOA 65 Solids 100% Elongation at Failure 80% Modulus of Elasticity (psi) 20,000 Tensile Strength (psi) 2,500 Hardness - Shore D 60 Shelf life of the liquid is at least 6 months from the date of shipment if stored in a cool (5-22° C), dark place in the original container. If refrigerated, allow the adhesive to come to room temperature prior to use.