KimWipes, 280 Wipes per Box 34155

P/N 14110700 Cletop-S Replacement Cartridge - Blue - Qty,6 Blue Cletop-S Replacement Cartridge, Qty, 6 Cartridges per Box, Sold by the Box, Replaces Cartridge on Cletop-S Cassette Cleaners P/N's 14110501 and 14110601,

P/N 14110601 Cletop-S Cassette Cleaner Type B Cletop-S Type B Cassette Cleaner with Blue Tape, Use on MU, MT, LC, Biconic, MPO (without pin), and MT-RJ (without pin),

850-1310 nm; bend insensitive; Max Operating Temperature 180 °C; Core Diameter 50 µm; Coating Outside Diameter 245 µm Multi mode mid-temperature specialty optical fibers for harsh environments; non hermetic. Key optical specifications Operating Wavelength (nm)  850, 1060, 1300 Cutoff Wavelength (nm)  n/a Maximum Attenuation (dB/km)  2.5 @ 850 nm    0.7 @ 1300 nm Bandwidth (MHz-km) @ 850 nm High Performance EMB  950 Bandwidth (MHz-km) @ 850 nm Legacy Performance OFL  700 Bandwidth (MHz-km) @ 1300 nm Legacy Performance OFL  500 Numerical Aperture  0.20 ± 0.015                Key geometric, mechanical and environmental specifications Core Diameter (µm)  50 Cladding Outside Diameter (µm)  125 Coating Outside Diameter (µm)  245* Core-to-Cladding Offset (µm)  ≤ 1.5 Standard Lengths  500 m, 1 km, 2 km, 5 km Proof Test (kpsi)  100 Operating Temperature (°C)  -60 to 180** Coating  Mid-Temperature Acrylate Optional Hermetic Layer * 200 μm also available for 150° only** Also fully qualified at 165°C                   Performance characteristics (values in this table are nominal or calculated) Refractive Index Profile  Graded Index Bend Loss (7.5 mm radius; 2 turns) (total induced attenuation)  ≤ 0.2 @ 850 nm    ≤ 0.50 @ 1300 nm Recommended Minimum Bending Radius (mm)  7.5        

The TK-375 kit includes the JIC-375 fiber optic stripper three hole, the ES-1964 electrician's scissor and the H-36 convenient molded two tool plastic pouch with metal clip by Jonard Tools. The JIC-375 fiber optic stripper Three hole model performs all common fiber stripping functions. The first hole of this fiber optic stripper strips the 1.6-3 mm fiber jacket down to the 600-900 micron buffer coating. The second hole strips the 600-900 micron buffer coating down to the 250 micron coating and the third hole is used to strip the 250 micron cable down to the 125 micron glass fiber without nicks or scratches. Handle is made of TPR (Thermoplastic Rubber). The electrician scissors are designed for heavy duty use. Made of chrome vanadium steel with a special hardening process for greater durability and nickel plated for that professional look. The electrician scissors are notched to strip 18-20 and 22-24 AWG wire and one blade is serrated. A scraper and file are on the back of the blade. Holds edge even when used on fiber and Kevlar based cables.  

FC/PC Type N (Wide Key); D-Shape; Zirconia Sleeve; Simplex; SM/PM

Refractive Index 1.56; 300 cps Viscosity at 25°C Norland Optical Adhesive 61 is a clear, colorless, liquid photopolymer that will cure when exposed to ultraviolet light. Since it is a one part system and 100% solids, it offers many advantages in bonding where the adhesive can be exposed to U.V. light. The use of NOA 61 eliminates premixing, drying or heat curing operations common to other adhesive systems. Curing time is remarkably fast, and is dependent upon the thickness applied and the amount of ultraviolet light energy available. NOA 61 meets Federal Specification MIL-A-3920 for optical adhesives and is approved for use on all government contracts specifying such adhesives. The adhesive is designed to give the best possible optical bond to glass surfaces, metals, fiberglass and glass filled plastics. NOA 61 is recommended for bonding lenses, prisms and mirrors for military, aerospace and commercial optics as well as for terminating and splicing optical fibers.Typical Properties of NOA 61 Solids 100% Elongation at Failure 38% Modulus of Elasticity (psi) 150,000 Tensile Strength (psi) 3,000 Hardness - Shore D 85 Shelf life of the liquid is at least 4 months from the date of shipment if stored in a cool (50C - 220C), dark place in the original container. If refrigerated, allow the adhesive to come to room temperature prior to use.

Carbon Dioxide Spray Cleaning Pen; Especially for High-power Applications; Quick, Dry & Solvent-free; Includes Spray Pen Applicator and Foot Switch; Power Supply 230 VAC OZ Optics OZ-PEN series of versatile, precision, small surface area cleaning systems for critical fiber optics and other manufacturing operations generates and propels an adjustable spray of clean dry air or nitrogen containing small CO2 particles to efficiently remove foreign matter from a surface. OZ-PEN replaces or augments conventional solvent-aided wiping cleaning techniques which can spread, smear or shed, or redeposit trace residues and particles over critical surfaces. Each OZ-PEN is equipped with a flexible coaxial tube, spray pen applicator and foot switch. The basic system provides precision cleaning capability right out of the box and includes all components for precision cleaning apart from the process gases. The composite spray cleaning technique is a patented process, delivering controlled shear stress on surface contaminants using chemically inert, dry CO2 spray for efficient and effective removal of inorganic and organic surface contamination from critical substrate surfaces. The cleaning unit delivers a precisely controlled accelerated stream of solid carbon dioxide particles (i.e. snow) at high velocity. The snow is created from the conversion of liquid CO2 to solid CO2 particles and CO2 gas at the spray nozzle. The nozzle, propellant pressure and temperature are adjusted for optimal cleaning process. The main method for removal of particulate and other loosely bound contaminants is momentum transfer. In this process, an incoming CO2 particle strikes a particle on the surface. The resulting force overcomes the force holding the particle to the surface, and the CO2 gas spray/propellant plume then carries the particle away. This unique dry process can remove very small particles (<100 nm in size) without the need for using other wet cleaning techniques. Thin film organic contamination (if soluble in liquid CO2) may also be removed by CO2 composite snow cleaning. Typical light oils are good candidates for CO2 cleaning. Solid CO2 spray within the spray plume exists at a temperature of approx. -78 °C. The cooling properties of CO2 can be used to remove contaminant with high water content, first by freezing then by fracturing it from the underlying substrate. Key Features: Superior Removal of Any Residue on Fiber Optics and Other Components Especially for High-power Applications CO2 Composite Spray Quick, Dry and Solvent-free Cleaning Process Designed to Clean Small Surface Areas Superior to Solvent Cleaning Wiping Techniques More Economical and Versatile Than Snow Guns With Enclosures Cleans a Variety of Substrates such as Glass, Metal, etc. Removes Dust Particles, Polishing Compounds, Fingerprints, Surface Films and Other Surface Residues Applications: Effective Cleaning of Various High-power Fiber Optic Connectors and Other Components; Optical Element Cleaning; Optical Coating Preparation/Cleaning; Cleaning of Electro-optic Sensors and Medical Devices; Cleaning of Semiconductor and Biomedical Components Surface