FRS22012 & SLR3 Series RF Reed Relays

Cynergy 3 Components-Sensata Technologies

Product number: SW10211

Downloads

FRS22012 & SLR3 Series RF Reed Relays Cynergy3 - Sensata Datasheet

Product information "FRS22012 & SLR3 Series RF Reed Relays"

Miniature Latching 1.5 A; 3.5 kV

A latching RF reed relay designed for manpack, portable HF radio systems,from 1-30MHz, where power resources are limited and board space is at a premium. These relays have separate set and reset coils to simplify board design, are capable of carrying up to 1.5A current at 30MHz and can withstand either 1.5, 3 or 3.5kV between contacts. The FRS22012 is a fast latching relay with RF and magnetic screening, that enables switching with coil pulse lengths down to 0.5ms.

Manufacturer "Cynergy 3 Components-Sensata Technologies"

Similar products

4 Series RF Reed Relays

Miniature Screened 3.5 A; 3.5 kV The 4 series is a highly flexible, low cost package for RF applications in the 1-30MHz band. The use of vacuum reed switches with Rhodium contacts offers high isolation voltages, low contact resistance and long operating lifetime. Additional RF screening is available to further enhance RF performance for more demanding applications. Available as Form A (SPNO), Form B (SPNC) or latching (bistable) contact configurations with switch connections via either PCB or flying lead.

Product number: SW10197

Manufacturer:

€9,999.00*

6 Series RF Reed Relays

Miniature Fully Screened 4 A; 3.5 kV The 6 series is a fully screened relay offering low RF loss and high current carrying capacity, which was developed with RF design engineers in the radio communications industry.

Product number: SW10198

Manufacturer:

€9,999.00*

D Series Flying Lead Connection HV Reed Relays

10 & 15 kV isolation; 50 W; Flying Lead Connection The very high isolation voltages of the D series, up to 15kV, are achieved through the use of high vacuum reed switches with either Rhodium or Tungsten contacts and make these relays suitable for high reliability applications such as cardiac defibrillators, test equipment and high voltage power supplies. The Rhodium contacts have low contact resistance while the Tungsten contacts can switch higher voltages.

Product number: SW10204

Manufacturer:

D Series Panel Mount HV Reed Relays

10 & 15 kV isolation; 50 W; Panel Mount The very high isolation voltages of the D series, up to 15kV, are achieved through the use of high vacuum reed switches with either Rhodium or Tungsten contacts and make these relays suitable for high reliability applications such as cardiac defibrillators, test equipment and high voltage power supplies.

Product number: SW10207

Manufacturer:

D Series PCB Connection HV Reed Relays

10 & 15 kV isolation; 50 W; PCB Connection The very high isolation voltages of the D series, up to 15kV, are achieved through the use of high vacuum reed switches with either Rhodium or Tungsten contacts and make these relays suitable for high reliability applications such as cardiac defibrillators, test equipment and high voltage power supplies.

Product number: SW10205

Manufacturer:

D Series Spade Connection HV Reed Relays

10 kV isolation; 50 W; Spade Connection The very high isolation voltages of the D series, up to 10kV, are achieved through the use of high vacuum reed switches with either Rhodium or Tungsten contacts and make these relays suitable for high reliability applications such as cardiac defibrillators, test equipment and high voltage power supplies.

Product number: SW10208

Manufacturer:

D Series Turret Connection HV Reed Relays

10 & 15 kV isolation; 50 W; Turret Connection The very high isolation voltages of the D series, up to 15kV, are achieved through the use of high vacuum reed switches with either Rhodium or Tungsten contacts and make these relays suitable for high reliability applications such as cardiac defibrillators, test equipment and high voltage power supplies.

Product number: SW10206

Manufacturer: