FCI-InGaAs-XXX InGaAs Photodiodes
Product number:
SW11034
Manufacturer:
OSI Optoelectronics
Product information "FCI-InGaAs-XXX InGaAs Photodiodes"
900 to 1700 nm; Active Area 0.004 to 0.196 mm2; AA Dia. 0.075 to 0.5 mm; Rise Time 0.20 to 10.0 ns; Responsivity 0.80 to 0.95 A/W; Capacitance 1.5 to 20 pF; Package TO-46, Fiber Receptacles FC, SC, ST, SMA Available
OSI Optoelectronics’ FCI-InGaAs-XXX series of high-speed InGaAs photodiodes with active area diameters of 75, 120, 300, 400 and 500 µm exhibit the characteristics and need for datacom and telecom applications.
Low capacitance, low dark current and high responsivity from 1100 to 1620 nm make these devices ideal for high bit rate receivers used in LAN, MAN, WAN and other high-speed communication systems.
FCI-InGaAs-XXX photodiodes are packaged in 3-lead isolated TO-46 cans with anti-reflective (AR) coated flat windows or micro lenses to enhance coupling efficiency. FCI-InGaAs-XXX series photodiodes are also offered with FC, SC, ST and SMA receptacles.
Key Features:
- High Speed
- High Responsivity
- Low Noise
- Spectral Range 900 to 1700 nm
Applications: High Speed Optical Communications; Single Mode (SM) / Multi Mode (MM) Fiber Optic Receivers; Gigabit Ethernet/Fibre Channel; SONET/SDH, ATM; Optical Taps
Manufacturer "OSI Optoelectronics"
Related links of the manufacturer
Similar products
Avalanche Photodiode APD Module for OTDR
1250-1650 nm; Responsivity 25 A/W; Breakdown Voltage 40-70 V; Dark Current 1 nA; Package 3-pin TO 46
Wooriro’s APD module for OTDR applications is based on an InGaAs/InP avalanche photodiode (APD) in TO-46 package. This module’s APD is pigtailed, and the module can be ordered either without connector or with a SC, LC or FC type optical connector in UPC or APC version.
Designed for an optical wavelength range of 1250 nm to 1650 nm, the APD module for OTDR features a very low dark current of 1 nA typical at 98% breakdown voltage. Typical responsivity is 25 A/W at 1550 nm wavelength and 10 nW optical input power.
Key Features:
InGaAs/InP Avalanche Photodiode APD
Low Dark Current: 1 nA (Typical, @0.98 x Breakdown Voltage)
High Reliability
Optical Wavelength Range: 1250 nm to 1650 nm
Responsivity: 25 A/W Typ. (VAPD = 0.98 VBR, λ = 1550 nm, Pin = 10 nW)
Breakdown Voltage VBR: 40 V to 70 V (Id = 10 µA)
Temperature Coefficient of VBR: 90 mV/°C (-40 °C to +85 °C)
Dimensions: Ø 6 mm x Length 20.2 mm
Applications: OTDR; Optical Sensor; Optical Test Instruments
Product number:
SW11675
Manufacturer:
Avalanche Photodiode APD with Burst-mode TIA
Integrated TIA With Burst Mode; 1260-1640 nm; Responsivity 10.5 A/W; Breakdown Voltage 23-31 V; Dark Current 500 nA; Package 6-pin TO 46
Wooriro’s avalanche photodiode (APD) with burst-mode TIA is packaged in a 6-pin TO-46 case with aspherical lens cap. The APD’s integrated transimpedance amplifier (TIA) can be operated in a burst mode that lifts the input data rate from 1.25 Gb/s continuous to 10.3125 Gb/s burst. Users can control the burst mode via a logic signal connected to pin 5 of the APD’s TO-46 case.
Designed for an optical wavelength range of 1260 nm to 1640 nm, the APD with burst-mode TIA features a dark current of 500 nA typical at 98% breakdown voltage. Typical responsivity is 10.5 A/W at 1310 nm wavelength and 50 µW optical input power.
Key Features:
Integrated Transimpedance Amplifier (TIA)
Burst Mode for 10 Gb/s
Standard TO-46 Package With Aspherical Lens Cap
Optical Wavelength Range: 1260 nm to 1640 nm
Responsivity: 10.5 A/W Typ. (λ = 1310 nm, Pin = 50 µW, VAPD = 0.95 VBR)
TIA Supply Voltage: 3.3 V (2.97 V to 3.63 V)
TIA Supply Current: 40 mA Typ.
Transimpedance: 2 kΩ Typ. (Differential, 50 Ω on Each Output)
APD Breakdown Voltage VBR: 23 V to 31 V
Temperature Coefficient of VBR: 20 mV/°C (-40 °C to +85 °C)
APD Dark Current: 500 nA (Typical, @0.9 x Breakdown Voltage)
Sensitivity: -32 dBm Typ. (CM @Continuous Mode 10.3125 Gb/s NRZ, PRBS = 231 – 1, BER = 1E-3, ER = 5.97 dB, λ = 1310 nm)
Dimensions: Ø 4.67 mm x Length 3.38 mm
Applications: IEEE 802.3av 10G 10G-EPON OLT
Product number:
SW11676
Manufacturer:
EOPD Molded Plastic, Hermetic TO and SMD Photodiodes
265-1300 nm; UV, Visible, IR; Active Area 0.1-15 mm²; Responsivity 0.18-0.9 A/W; Dark Current 0.00001-2,000 nA; Package 5 mm Molded Plastic, TO-5, TO-46, TO-52, SMD 1206
EPIGAP offers a wide range of photodiodes in the ultraviolet (UV), visible (VIS) and infrared (IR) spectral range. The EOPD series includes GaP photodiodes, Si and SiC photodiodes as well as InGaAs and AlGaAs photodiodes.
Available in 5 mm molded plastic, SMD 1206 and hermetic TO packages (TO-5, TO-46 and TO-52), the EOPD series photodiodes are designed for applications requiring low dark current, high reliability and high sensitivity. Further advantages of the EOPD series photodiodes are degradation stability, good matching with LEDs, no stray light problems and optional miniaturization.
The range of standard products is supplemented by specialties with larger active sensor surfaces or extended sensitivity from 150 nm (low UV) up to 2600 nm in the higher infrared range. For customer-specific designs, EPIGAP Optronic’s photodiode components are also available as bare photodiode chips (EOPC series) with high sensitivity and low dark current. Please contact the AMS Technologies photodiode experts to find the right solution that meets your design project’s requirements. We would like to support you and look forward to your inquiries!
Key Features:
Product
Max. Sensitivity
Package
Active Area
Responsivity
Dark Current
Downloads
EOPD-280-0-0.3-1
265 nm
TO-52
0.1 mm2
0.18 A/W
10 fA
Datasheet
EOPD-525-1-0.9-1
525 nm
SMD 1206
0.73 mm2
0.3 A/W
5 pA
Datasheet
EOPD-525-1-0.9-2
525 nm
SMD 1206
0.73 mm2
0.3 A/W
5 pA
Datasheet
EOPD-940-0-2.52
940 nm
TO-5
5 mm2
0.6 A/W
1 nA
Datasheet
EOPD-940-0-3.57
940 nm
TO-5
10 mm2
0.6 A/W
1 nA
Datasheet
EOPD-940-0-15
940 nm
TO-5
15 mm2
0.6 A/W
1 nA
Datasheet
EOPD-940-0-5.8Q
940 nm
TO-5
4 x 1.44 mm2
0.6 A/W
0.5 nA
Datasheet
EOPD-1300-0-0.1-1
1300 nm
TO-46
0.1 mm2
0.8 A/W
1 µA
Datasheet
EOPD-1300-0-0.8-1
1300 nm
TO-46
0.8 mm2
0.8 A/W
2 µA
Datasheet
EOPD-1300-0-1.0-1
1300 nm
TO-46
1 mm2
0.8 A/W
2 µA
Datasheet
EOPD-1300-0-1.5-3
1300 nm
TO-46
1.5 mm2
0.8 A/W
2 µA
Datasheet
EOPD-1300-1-0.3
1300 nm
SMD 1206
0.3 mm2
0.8 A/W
0.3 nA
Datasheet
EOPD-1300-5-0.3
1300 nm
5 mm
0.3 mm2
0.9 A/W
15 pA
Datasheet
EOPD-1300-0-0.3-1
1300 nm
TO-46
0.3 mm2
0.8 A/W
1 µA
Datasheet
Applications: Universal measurements in the UV, VIS and IR Range; Sterilization Lamp Monitoring; Flame Monitoring; Alarm Systems; Light Barriers; Daylight Sensors; Nearly Vλ-matched Detectors; Colorimeters; Photometers; Spectroscopy Equipment; Fluorescence; Beam Centering; Optical Encoders; High-speed Optical Communications; Optical LAN; Optical Switches; Ethernet Fiber Channel; Safety Equipment; Light Barriers
Product number:
SW11567
Manufacturer:
FCI-H125/250G-InGaAs-75 InGaAs Photodiode-Amplifier Hybrids
1100 to 1650 nm; Active Area 0.004 mm2; AA Dia. 0.075 mm; Responsivity 1,600 to 2,500 V/W; Transimpedance 2,800 Ω; Package TO-46
OSI Optoelectronics’ FCI-H125/250G-InGaAs-75 series are compact and integrated high-speed InGaAs photodetectors with wide dynamic range transimpedance amplifiers (TIA). Combining the detector with the TIA in a hermetically sealed 4-pin TO-46 package provides ideal conditions for high-speed signal amplification. High speed and superior sensitivity make these devices ideal for high bit rate receivers used in LAN, MAN, WAN and other high speed communication systems. TO packages come standard with a lensed cap to enhance coupling efficiency, or with a broadband double-sided anti-reflective (AR) coated flat window. The FCI-H125/250G-InGaAs-75 series are also offered with FC, SC, ST and SMA receptacles. Key Features:
InGaAs Photodetector / Low Noise Transimpedance Amplifier
High Bandwidth / Wide Dynamic Range
Hermetically Sealed TO-46 Can
Single +3.3 to +5 V Power Supply
Spectral Range 1100 to 1650 nm
Differential Output
Applications: High-speed Optical Communications; Gigabit Ethernet; Fibre Channel; ATM; SONET OC-48 / SDH STM-16
Product number:
SW11044
Manufacturer:
FCI-H622M-InGaAs-75 InGaAs Photodiode-Amplifier Hybrid
1100 to 1650 nm; Active Area 0.004 mm2; AA Dia. 0.075 mm; Responsivity 16 V/mW; Transimpedance 18 kΩ; Package TO-46
OSI Optoelectronics’ FCI-H622M-InGaAs-75 is a high-speed 75 µm InGaAs photodetector integrated with a wide dynamic range transimpedance amplifier (TIA). Combining the detector with the TIA in a hermetically sealed 4-pin TO-46 package provides ideal conditions for high-speed signal detection and amplification. Low capacitance, low dark current and high responsivity of the detector, along with low noise characteristics of the integrated TIA, give rise to excellent sensitivity. In practice, these devices are ideal for datacom and telecom applications. Cost-effective TO-46 packages come standard with a lensed cap for design simplification, or with a broadband double-sided anti-reflective (AR) coated flat window. The FCI-H622M-InGaAs-75 is also offered with FC, SC, ST and SMA receptacles. Key Features:
Low Noise Transimpedance Amplifier
High Bandwidth
Wide Dynamic Range
Single +3.3 V Power Supply
Spectral Range 1100 to 1650 nm
Differential Output
Applications: High-speed Optical Communications; ATM; SONET OC-3 / OC-12; SDH STM-1 / STM-4; Optical Receivers
Product number:
SW11045
Manufacturer:
FCI-InGaAs-300B1XX Back-illuminated InGaAs Photodiodes
900 to 1700 nm; Active Area 0.07 mm2; AA Dia. 0.3 mm, Pitch 0.5 mm; Responsivity 0.80 to 0.85 A/W; Capacitance 8 to 10 pF; Package Flip Chip Mountable
OSI Optoelectronics’ FCI-InGaAs-300B1XX series are multifunctional backside illuminated photodiode/arrays. They are available as single element diodes or 4 - or 8- element arrays with an active area of 300 µm each. These back-illuminated InGaAs photodiodes/arrays are designed to be flip chip mounted (active area facing up), or assembled face down minimizing the overall dimensions. These low inductance, low dark current, and low capacitance back illuminated photodiodes/arrays come with or without ceramic substrates. Key Features:
Back Illumination
High Responsivity on Both Front and Back
Low Noise
Spectral Range 900 to 1700 nm
Applications: High Speed Optical Communications; Multichannel Fiber Optic Receiver; Power Monitoring; Single Mode (SM) Multi Mode (MM) Fiber Optic Receiver; Fast Ethernet, SONET/SDH OC-3/STM-1 ATM; Instrumentation and Analog Receivers
Product number:
SW11027
Manufacturer:
FCI-InGaAs-36C InGaAs Photodiodes
910 to 1650 nm; Active Area 0.001 mm2; AA Dia. 0.036 mm; Responsivity 0.75 to 0.85 A/W; Capacitance 0.16, 0.2 pF; Package Special Chip-size
OSI Optoelectronics' FCI-InGaAs-36C is an OC-192 (SONET/SDH) capable photosensitive device, exhibiting low dark current and good performance stability. Both anode and cathode contacts appear on the chip's top facet. FCI-InGaAs-36C is an ideal component in high-speed optical data transport applications at 10 Gbps, responding to a spectral envelope that spans from 910 to 1650 nm. Key Features:
High Speed: 10 Gbps Data Rates
Low Dark Current
Front Illuminated
High Responsivity: Typ. 0.8 A/W @ 1550 nm
Diameter of Light Sensitive Area: 36 µm
Low Capacitance
Applications: High Speed Optical Communications; OC-192; Optical Networking; Optical Measurement
Product number:
SW11046
Manufacturer:
Customers also viewed
PIN-HR High-speed Silicon Photodiodes
830 nm Band Optimized; Active Area 0.01 to 1.0 mm2; AA Dia. 0.127 to 0.991 mm Round, 0.203, 1.0 mm Square; Responsivity 0.45, 0.50 A/W; Capacitance 0.8 to 4.9 pF; Package TO-18
OSI Optoelectronics’ PIN-HR series of high-speed silicon photodiodes are small area devices optimized for fast response time or high-bandwidth applications. The BPX-65 model complements the rest of the PIN-HR high-speed series with an industry standard. The spectral range for these devices goes from 350 to 1100 nm. The responsivity and response time are optimized such that the PIN-HR series exhibit a peak responsivity of 0.50 A/W at 800 nm and typical response times of a few hundred picoseconds at -5 V. Note that for all high-speed photodetectors, a reverse bias is required to achieve the fastest response times. However, the reverse bias should be limited to maximum reverse voltage specified to avoid damage to the detector. Output signals can be measured directly with an oscilloscope or coupled to high frequency amplifiers. All parts in the high-speed silicon series are available with a flat window or ball lens. Key Features:
Low Dark Current
Low Capacitance
TO-46 Package
Window or Lensed Cap
Sub ns Response
Applications: Video Systems; Computers and Peripherals; Industrial Control; Guidance Systems; Laser Monitoring
Product number:
SW11019
Manufacturer:
NOVA Automated Polishing System
Interchangeable Fixtures for Connectors, Waveguides, Bare Fibers, Other; Film Size 4 Inch Diameter; Capacity up to 8 Components; Connector Apex Offset <50 µm; Connector Radius of Curvature 5-25 mm; Connector Protrusion/Undercut: 50--120 nm
KrellTech’s NOVA™ automated polishing system provides maximum flexibility for optical surface processing and supports a variety of polishing applications from connectors to waveguides, and bare fibers to custom components. NOVA™ is scalable for R&D projects, high-volume production and the rigors of harsh environments and field installation.
NOVA™ workholders feature KrellTech’s patented independent suspension at each connector position for controlled pressure and uniform contact. Combined with NOVA’s Microfeed™ fixture advancement, connector “airpolishing” and epoxy removal can be performed directly in the machine. Each position is optically aligned for optimal polish geometry using KrellTech’s patented process and calibration mechanism. Connector types can also be mixed and matched in a single fixture.
NOVA’s versatility provides the ability to support the polishing of many photonic components. A quick change-out of workholder fixtures provides processing capability for waveguides, optical chips, PLCs, lenses and fiber arrays. Workholders utilize a unique holding mechanism that can secure a wide range of component dimensions. The polishing angle is adjustable and custom fixtures can be fabricated for specialized applications.
Bare fiber can be polished at variable angles using specialized workholders and adapters. A variety of fiber types from standard single mode (SM) to polarization maintaining (PM) and sapphire to PCF can be processed into wedge and chisel tip shapes. A quick swap-out of adapters allow the polishing of fiber diameters from 80 um to >3 mm.
NOVA™ features an intuitive user interface for creating polishing programs. All parameters including cycle time, pressure and speed settings are easily inputted for all component types and desired surface geometries. A unique “manual mode” allows the adjustment of polishing parameters in real-time during NOVA™ operation. This feature streamlines process development efforts and facilitates easy and quick program creation and refinement.
A new NOVA™ operation software kit is available that upgrades NOVA™ polishers with the enhanced microfeed feature. This polishing routine provides greater programming flexibility for advancing components to the polishing surface at slower and more controllable rates. While version 1 NOVA™ software was limited to 10 pre-programmed microfeed rates, with the slowest being 100 µm/s, version 2 software allows to customize rates as slow as 5 µm/min. This yields precise removal of material stock and continual component advancement. The enhanced microfeed is ideal for larger optical surfaces, delicate bare fibers, and connector air polishing. V2 also provides the ability to create "pop-up" window prompts in between each polishing step, very useful as reminder to technicians to clean fibers, inspect polishing lengths, confirm geometry, etc. before initiating the next process step. New folder management allows programs to be organized according to connector types, fiber diameters, component, etc.
Bare Fiber Coning and Chisel Option
The optional Orbit™ bare fiber coning and chisel system enhances NOVA™'s bare fiber processing with conical and chisel tip shaping. Unique fiber tip geometries can be formed for lensing, sensing and light guiding applications.
The fiber rotation module can be mounted on standard NOVA™ variable angle and waveguide workholders. Fiber "spin" speed is user adjustable and can be set for continual rotation or the unique "360 auto-reverse" motion that prevent fiber twisting and torquing. All variables are entered and selected via a touchscreen on the Orbit™ controller. When combined with NOVA™ Auto-Angle Workholders, Orbit™ precisely positions the polishing fixture at the designed angle on a repeatable basis.
Inspection Options
Optional video inspection systems monitor the polishing process and inspect the polished surface directly in NOVA™.
NOVA™'s Profile Videoscope allows the real-time monitoring of component polishing. This videoscope aids with bare fiber/component positioning and confirms process completion. Teamed with measurement software, this system verifies the endface geometry of a broad range of photonics components. Teamed with measurement software, this system verifies the endface geometry of fibers, waveguides and arrays.
NOVA™'s Surface Videoscope allows the in-line inspection of polished surfaces while the component is still loaded in the polisher. This minimizes material handling and streamlines photonic production compared to the traditional process of transferring components to off-line inspection stations. Polishing and specification compliance can be determined in a single workcell.
Key Features:
Precision Optical Polishing
Wireless Tablet Control With Microfeed™
Telcordia Compliant
Interchangeable Fixtures for Waveguides, Bare Fibers and More
Air Polishing Machine
Polishing Pressure: Programmable & Automated, Linear Displacement With Micron Positioning Control
Polishing Speed and Cycling Time: Program Selectable
Polishing Motion: Random Orbital
Polishing Routines: Programmable (Step by Step Prompts), Microfeed™ Controlled Advancement, Manual Mode With Full Process Control
Film Size: 4 Inch Diameter
Connector Support: All Industry Standard Connectors, MIL-spec Termini and Ferrules, UPC & APC Geometries
Connector Capacity: Up to 8 Components – Selections Can Be Mixed & Matched in Same Workholder Fixture
Connector Apex Offset: <50 µm Maximum, <15 µm Typical
Connector Radius of Curvature: 10 to 25 mm (2.5 mm Ferrules), 7 to 20 mm (1.25 mm Ferrules), 5 to 12 mm (APC Ferrules)
Connector Protrusion/Undercut: 50 nm to -120 nm
Connector Back Reflection: <-60 dB (UPC), <-65 dB (APC)
Connector Insertion Loss: <0.25 dB Typical
Connector Process Time: Approximately 15 s/Connector
Waveguide Component Support: Waveguides, Planar Lightwave Circuits, Optical Chips, Fiber Arrays
Waveguide Component Dimension Range: Width 5 to 30 mm, Thickness 0.5 to 5 mm, Length >5 mm
Waveguide Angle Repeatability: ±0.3° (X/Y Axis Along Edge)
Waveguide Adjustable Polish Angle Range: 0° (Flat) to 45°
Fiber Type Range: Single Mode (SM), Multi Mode (MM), Polarization Maintaining (PM), Plastic, PCF, Chalcogenide, Sapphire, Specialty Fibers
Fiber Diameter: 80 µm to >3 mm
Fiber Angle Range: 0° (Flat) to 50°
Fiber Angle Repeatability: ±0.5° Typical
Equipment Footprint & Weight: 305 x 305 mm, 11.3 kg
Applications: Automated Optical Polishing of Connectors, Waveguides, Bare Fibers and More; Research and Development Projects; High-volume Production; Harsh Environments and Field Installation
Product number:
SW11368
Manufacturer:
FCI-InGaAs-300B1XX Back-illuminated InGaAs Photodiodes
900 to 1700 nm; Active Area 0.07 mm2; AA Dia. 0.3 mm, Pitch 0.5 mm; Responsivity 0.80 to 0.85 A/W; Capacitance 8 to 10 pF; Package Flip Chip Mountable
OSI Optoelectronics’ FCI-InGaAs-300B1XX series are multifunctional backside illuminated photodiode/arrays. They are available as single element diodes or 4 - or 8- element arrays with an active area of 300 µm each. These back-illuminated InGaAs photodiodes/arrays are designed to be flip chip mounted (active area facing up), or assembled face down minimizing the overall dimensions. These low inductance, low dark current, and low capacitance back illuminated photodiodes/arrays come with or without ceramic substrates. Key Features:
Back Illumination
High Responsivity on Both Front and Back
Low Noise
Spectral Range 900 to 1700 nm
Applications: High Speed Optical Communications; Multichannel Fiber Optic Receiver; Power Monitoring; Single Mode (SM) Multi Mode (MM) Fiber Optic Receiver; Fast Ethernet, SONET/SDH OC-3/STM-1 ATM; Instrumentation and Analog Receivers
Product number:
SW11027
Manufacturer: