Skip to main content

Emparro 10 - Power Supply 10A for TEC Cabinet Cooler

Product information "Emparro 10 - Power Supply 10A for TEC Cabinet Cooler"

Emparro 10 – Article number: 42 10A 500

  •     Single phase, primary switch mode  
  •     Stabilized output voltage
  •     Short circuit and overload protected
  •     High efficiency
  •     DIN – rail mounting to EN 60715

Input voltage     85- 265V 50/60Hz Input current     1,1A (240V) Output voltage     24V DC (24 - 28V adjustable) Nom output current     10A Efficiency     95% Mains failure bridging     > 20 ms Protection     Short circuit and overload protected Temperatur range     -25 bis +60°C Dimensions (L x B x H)     125 x 65 x 137 mm Weight     0,94 kg

Manufacturer "Elmeko"
Related links of the manufacturer

Similar products

Emparro 20 - Power Supply 20A for TEC Cabinet Cooler
Emparro 20 – Article number: 42 20a 500     Single phase, primary switch mode     Stabilized output voltage     Short circuit and overload protected     Input voltage range 90 – 265 V AC     DIN – rail mounting to EN 50022 Input voltage     85- 265V 50/60Hz Input current     2,2A (240V) Output voltage     24V DC (24 - 28V adjustable) Nom output current     20A Efficiency     95% Mains failure bridging     > 20 ms Protection     Short circuit and overload protected Temperatur range     -25 bis +60°C Dimensions (L x B x H)     125 x 85 x 137 mm Weight     1,38 kg
Product number: C009337-6
Manufacturer:

€248.60*
Emparro 5 - Power Supply 5A for TEC Cabinet Cooler
Emparro 5 – Article number: 42 05a 500     Single phase, primary switch mode     Stabilized output voltage     Short circuit and overload protected     Input voltage range 90 – 265 V AC     DIN – rail mounting to EN 50022 Input voltage     85- 265V 50/60Hz Input current     0,55A (240V) Output voltage     24V DC (24 - 28V adjustable) Nom output current     5A Efficiency     95% Mains failure bridging     > 20 ms Protection     Short circuit and overload protected Temperatur range     -25 bis +60°C Dimensions (L x B x H)     125 x 50 x 137 mm Weight     0,80 kg
Product number: C019150-6
Manufacturer:

€166.10*
TPC 300 - Peltier-Controller for TEC Cabinet Cooler
Peltier-Controller TPC 300 – Article number: 45 TPC 300V2 Supply voltage: 24 V DC Max. switching capacity : 20 A  Temperature range: -20°C...+70°C Hysteresis for heating and cooling : 0,5 bis 20°C 1 temperature sensor (Port for temperature / humidity sensor: 4) Communication interface: RS485 Connection: push-in connection terminals Control programs: 4 Protection class: IP20 / III Dimensions: 108 x 90 x 61mm Weight: 200g TPC-Monitor software, available as download Installation: Holding clamp on 35mm standard rail Storage temperature: -30°C...+75°C Approval: CE
Product number: C017322-6
Manufacturer:

€414.40*
pcs
TRP 205 - Temperature Controller for TEC Cabinet Cooler
Thermostat TRP 205 – Article number: 45 TRP 205     Temperature controllers with bimetallic or capillary sensors     Electronic temperature controllers     Humidity controllers     Speed controllers     Protection of electronics against heat, coldness and humidity     Switching contact for fans, heaters, heat exchangers and cooling units or signal contact     Reduction of noise level     Saving of energy Contact     heating + cooling Switching differences     ca. 1K Sensor     internal NTC (external as option) Switching capacity     DC: 24V, max. 16A Voltage     24V DC Dimensions (L x B x H)     36 x 86 x 62,5 mm Weight     0,11 kg
Product number: C009338-6
Manufacturer:

€104.50*
TRP 260 - Temperature Controller for TEC Cabinet Cooler
Temperature control TRP 260 – Article number: 45 TRP 260 Supply voltage: 24 V DC Max. switching capacity : 16 A (bei 24V DC) Temperature range: 0 bis +60°C Measuring and indicating accuracy: 0,5°C Hysteresis for heating and cooling : 0,5 bis 9,5°C separately adjustable Display:  4 Digit  7 Segment LED 2 temperature sensors (digital) : Dallas 18S20 (cable length 1 m.) Fault message contact: Relay contact, NO relay Protection class: IP 40 Dimensions: 70,5 x 96 x 42 mm Temperature control: Program 1: on-off control on-off control 2nd sensor for monitoring the warm or cold side Program 2: difference control 2nd sensor for control, governed by external temperature 
Product number: C019148-6
Manufacturer:

€244.20*
Only 3 available
TRS 60 - Temperature Controller
Thermostat TRS 60 – Article number: 15 TRS 060 Temperature controllers with bimetallic or capillary sensors Electronic temperature controllers Humidity controllers Speed controllers Protection of electronics against heat, coldness and humidity Switching contact for fans, heaters, heat exchangers and cooling units or signal contact Reduction of noise level Saving of energy Contact     NO Temperature range     0 - 60°C Switching differences     4 - 7K Sensor     bimetal Switching capacity     AC: 250V / 10(2)A, DC: max. 30W Dimensions (L x B x H)     64 x 37 x 46 mm Weight     0,05 kg
Product number: C019212-6
Manufacturer:

€16.50*

Customers also viewed

Vacuum Interrupters
35 to 450 A RMS; Single Terminal; 28 to 45 kV; Mechanical Life 0.5 to 2 Mio. OperationsJennings Technology’s series of vacuum interrupters handle a wide range of voltage and current interrupt levels, and high-quality and highly reliable interrupters are available for the utility and industrial markets.Current interruption in a vacuum is recognized as the ideal switching technology in the medium voltage range, and it is also applied in high-voltage and low-voltage applications. Excellent switching capabilities and compact design make vacuum interrupters the most economical switching device solutions possible.Jennings vacuum interrupters feature an evacuated ceramic insulating envelope surrounding two contacts, one fixed and one movable. The movable contact is operated from the outside through a metallic bellows. Contacts are typically a copper alloy that is developed for use in AC voltage applications. The end plates are made of stainless steel or copper.With these features, vacuum interrupters can be expected to last the life of the equipment in which they are installed. Their interruption mechanism is independent of the current magnitude, so interruption can normally be anticipated at the first current zero with no restriking, as the dielectric strength of the contact gap recovers more rapidly than the recovery voltage can rise.Vacuum dielectric enables the interrupters’ contacts to be arranged close together, so circuit interruptions can be designed in a smaller envelope. With current interruption occurring in a vacuum, all arcing is confined within the vacuum interrupter body, so Jennings interrupters are noise-free and flash-free, avoid contact contamination as oxides and corrosion layers cannot form in vacuum, and they do not emit any greenhouse or toxic gases.Key Features: Long Life, High Reliability Controlled Contact Erosion Results in Virtually Maintenance-free Operation Fast Interrupting Speed Rapid Dielectric Recovery High Cycle Withstand Voltages Robust, Compact Design Environmentally Friendly Atmospheric Contact Contamination is Eliminated Noise-free and Flash-free Applications: Load Break Switches; Contactors for Industrial and Motor Control; Capacitor Bank Switching; Circuit Breakers; Specialty RF and DC Applications
Product number: SW10935
Manufacturer:

TRP 260 - Temperature Controller for TEC Cabinet Cooler
Temperature control TRP 260 – Article number: 45 TRP 260 Supply voltage: 24 V DC Max. switching capacity : 16 A (bei 24V DC) Temperature range: 0 bis +60°C Measuring and indicating accuracy: 0,5°C Hysteresis for heating and cooling : 0,5 bis 9,5°C separately adjustable Display:  4 Digit  7 Segment LED 2 temperature sensors (digital) : Dallas 18S20 (cable length 1 m.) Fault message contact: Relay contact, NO relay Protection class: IP 40 Dimensions: 70,5 x 96 x 42 mm Temperature control: Program 1: on-off control on-off control 2nd sensor for monitoring the warm or cold side Program 2: difference control 2nd sensor for control, governed by external temperature 
Product number: C019148-6
Manufacturer:

€244.20*