DL Dye Lasers

Product number: SW11776

Manufacturer: Elforlight

Downloads

Product information "DL Dye Lasers"

560-610 nm; Pulse Energy >5, >50 µJ; Repetition Rate >1, >10 kHz; Min. Pulse Width <2, <5 ns; Jitter <±1 ns

Our DL series of dye lasers is a compact, easy to install complement to our DPSS laser products. Designed primarily to operate with the SPOT DPSS lasers for short pulses, the dye lasers can also be combined with the FQS DPSS lasers to produce higher energies.

DL series dye lasers convert the output of our pulse lasers to other useful wavelengths, whilst maintaining the benefits of short pulses and high repetition rates. The self-contained dye reservoir and pump enable operation for several weeks on one dye fill. Options of broad and narrow wavelength bandwidth (15 nm to <1 nm) are available.

Key Features:

Wavelengths: 560 nm to 610 nm (Other Dyes/Wavelengths Available on Request)
Max. Pulse Energy: >5 µJ, >50 µJ
Repetition Rate: Single Shot to >1 kHz, >10 kHz
Minimum Pulse Width: <2 ns, <5 ns
Jitter: <±1 ns from external trigger input (typ. 0.5 ns)
Beam Diameter: ~1 mm at Output Aperture
Line Width: ~4 nm
Compact Size
Easy to Install
Common Base Plate Available for Dye/Pump System
Self-contained Dye Pump
Tuning Option
Dye Used: Pyrromethene 597
Dimensions Dye Head: 270 mm x 122 mm x 60 mm

Applications: Photoacoustic Imaging; Spectroscopy

Manufacturer "Elforlight"

Customers also viewed

FQS DPSS Lasers

Actively Q-switched DPSS Lasers; 365, 532, 1064 nm; Pulse Energy >100->400 µJ; Repetition Rate ≤10 kHz; Min. Pulse Width <4, <5 ns; Jitter <±1 ns Our FQS range of DPSS lasers builds on the very successful SPOT actively Q-switched laser technology. Adopting key technical design features, the FQS range provides a series of models delivering up to 400 µJ with pulse widths of less than 5 ns. The FQS lasers’ jitter is maintained at a low level across the range. The compact laser head can be used to pump our dye laser products to produce a comprehensive range of wavelengths. The UV variant of the FQS has been very successful as a light source for MALDI (Matrix Assisted Laser Desorption/Ionization) applications. Key Features: Wavelengths: 355, 532, 1064 nm Pulse Energy @1 kHz: >100 µJ to >400 µJ Repetition Rate: ≤10 kHz Minimum Pulse Width: <4 ns, <5 ns Jitter: <±1 ns (typ. ± 0.5 ns) WRT ext. trigger input Spatial Mode: TEM00, M² <1.2 Beam Diameter: 1 mm at Output Aperture Beam Divergence: <1 mRad at 1 mm Diameter Polarization: >100:1 Variable Power Output RS232 Control Manual Safety Shutter User Interface (Interlock, On/Off Switch) Air Cooled External Trigger Laser Diode Protection 19” Rack Power Supply Universal Mains Input: 100 to 240 VAC, 50/60 Hz Max. Power Consumption: 1000 W Dimensions Laser Head: 240 mm x 210 mm x 100 mm Dimensions Power Supply: 19 Inch Rack, 2U High Applications: Photoacoustic Imaging; MALDI Mass Spectrometry (Matrix Assisted Laser Desorption/Ionization); Pumping of Dye Lasers / OPOs / Raman Lasers; LIDAR; Micromachining

Product number: SW11775

Manufacturer:

miniECL Single Frequency Laser Diodes

Toptica eagleyard’s miniECL series external cavity (ECL) diode laser is designed for highly demanding spectroscopic applications. The compact design integrates a gain chip with an external grating, allowing the system to fit into a 14-pin butterfly package with integrated beam collimation.The miniECL series is available at various wavelengths and achieves a linewidth of 100 kHz and a typical SMSR of 45 dB. Like the previously mentioned laser types, the miniECL requires no readjustment of the laser cavity due to its robust design, high mechanical stability of the resonator, and hermetically sealed package with an integrated thermoelectric cooler.Key Features:Narrow linewidth (~100 kHz)High SMSR (typ. 50 dB)Integrated beam collimationThermal management via integrated thermoelectric cooler and thermistorIntegrated optical isolator"Plug & Play" with fiber-pigtail butterfly packageProductWavelengthOutput PowerSpecificsminiECL-0770-00018-1500-BFY12-0005770 nm25 mWspectroscopy: K D1 lineminiECL-0795-00025-1300-BFY12-0005795 nm30 mWspectroscopy: K D1 lineYour Advantages:Easy to use thanks to high integration and "Plug & Play" functionalityRobust design with hermetically sealed butterfly packageUltra-narrow linewidth for high-precision applicationsCustomizable wavelengths availableEvaluation board included for faster testing and setup preparation

Product number: SW12023

Manufacturer: