D1 Series D Size Form C HV Reed Relays
Product number:
SW11851
Manufacturer:
Cynergy 3 Components-Sensata Technologies
Product information "D1 Series D Size Form C HV Reed Relays"
The D1 series is a reed relay with changeover contacts which are often used in safety critical applications. The switching is achieved through the use of high vacuum reed switches with tungsten contacts.
These relays are suitable for high reliability applications, such as test equipment and high voltage power supplies. These devices are PCB mount relays, although custom options may be available on request.
Key Features:
- D Size Form C (Changeover) Relay
- 100 W Switching Power
- Changeover Contacts
- UL Approved
- PCB Mount
- Available With or Without Magnetic Screen
- Switch Action: SPCO
- Contact Material: Tungsten
- Isolation Across Contacts DC or AC: 0.75 kV Peak
- Isolation Contact to Coil DC or AC: 3 kV Peak
- Max. Switching Power: 100 VA Resistive (@ 33.3 VDC Switching Voltage)
- Max. Switching Voltage: 240 VDC (@ 20 VA Switching Power)
- Max. DC Switching Current: 3 A (@ 100 VA Switching Power and 33 VDC Switching Voltage)
- Max. DC Carry Current: 4 A
- Capacitance Across Contacts: 2.3 pF (Coil to Screen Grounded)
- Max. Contact Resistance. 500 mΩ (Typical)
- Min. Insulation Resistance: 108 Ω (Rypical) (108 )
- Coil Voltage: 5 V, 12 V, 24 V
- Must Operate Voltage: 3.75 VDC , 9 VDC, 18 VDC
- Must Release Voltage: 0.5 VDC, 1.2 VDC, 2.4 VDC
- Resistance (±10%): 50 Ω, 340 Ω, 900 Ω
Manufacturer "Cynergy 3 Components-Sensata Technologies"
Related links of the manufacturer
Similar products
4 Series RF Reed Relays
Miniature Screened 3.5 A; 3.5 kV
The 4 series is a highly flexible, low cost package for RF applications in the 1-30MHz band. The use of vacuum reed switches with Rhodium contacts offers high isolation voltages, low contact resistance and long operating lifetime. Additional RF screening is available to further enhance RF performance for more demanding applications. Available as Form A (SPNO), Form B (SPNC) or latching (bistable) contact configurations with switch connections via either PCB or flying lead.
Product number:
SW10197
Manufacturer:
6 Series RF Reed Relays
Miniature Fully Screened 4 A; 3.5 kV
The 6 series is a fully screened relay offering low RF loss and high current carrying capacity, which was developed with RF design engineers in the radio communications industry.
Product number:
SW10198
Manufacturer:
D Series Flying Lead Connection HV Reed Relays
10 & 15 kV isolation; 50 W; Flying Lead Connection
The very high isolation voltages of the D series, up to 15kV, are achieved through the use of high vacuum reed switches with either Rhodium or Tungsten contacts and make these relays suitable for high reliability applications such as cardiac defibrillators, test equipment and high voltage power supplies. The Rhodium contacts have low contact resistance while the Tungsten contacts can switch higher voltages.
Product number:
SW10204
Manufacturer:
D Series Panel Mount HV Reed Relays
10 & 15 kV isolation; 50 W; Panel Mount
The very high isolation voltages of the D series, up to 15kV, are achieved through the use of high vacuum reed switches with either Rhodium or Tungsten contacts and make these relays suitable for high reliability applications such as cardiac defibrillators, test equipment and high voltage power supplies.
Product number:
SW10207
Manufacturer:
D Series PCB Connection HV Reed Relays
10 & 15 kV isolation; 50 W; PCB Connection
The very high isolation voltages of the D series, up to 15kV, are achieved through the use of high vacuum reed switches with either Rhodium or Tungsten contacts and make these relays suitable for high reliability applications such as cardiac defibrillators, test equipment and high voltage power supplies.
Product number:
SW10205
Manufacturer:
D Series Spade Connection HV Reed Relays
10 kV isolation; 50 W; Spade Connection
The very high isolation voltages of the D series, up to 10kV, are achieved through the use of high vacuum reed switches with either Rhodium or Tungsten contacts and make these relays suitable for high reliability applications such as cardiac defibrillators, test equipment and high voltage power supplies.
Product number:
SW10208
Manufacturer:
D Series Turret Connection HV Reed Relays
10 & 15 kV isolation; 50 W; Turret Connection
The very high isolation voltages of the D series, up to 15kV, are achieved through the use of high vacuum reed switches with either Rhodium or Tungsten contacts and make these relays suitable for high reliability applications such as cardiac defibrillators, test equipment and high voltage power supplies.
Product number:
SW10206
Manufacturer: