CP12G05 Aluminum Cold Plate with 4-Pass Copper tube, straight fittings

300x88.9x12.7 mm; Aluminum; Copper Tubes; 4 -PassLCP ET 88,9x12,7x300/4Pass_Cu is an aluminum cold plate combined with 4-pass copper tubes. The exclusive section shape, pressed in the base plates without glues or resins, maximizes adhesion and minimizes any thermal impedance between the tube coil and the plate, both on the straight and curved parts of the design.We can design embedded tube cold plates to be fully customized for the individual needs of each specific design, regardless of the application for which the plate is designed. Get in touch with our thermal experts to discuss your specific requirements.

150x88.9x12.7 mm; Aluminum; Copper Tubes; 4 -PassLCP ET 88,9x12,7x150/4Pass_Cu is an aluminum cold plate combined with 4-pass copper tubes. The exclusive section shape, pressed in the base plates without glues or resins, maximizes adhesion and minimizes any thermal impedance between the tube coil and the plate, both on the straight and curved parts of the design.We can design embedded tube cold plates to be fully customized for the individual needs of each specific design, regardless of the application for which the plate is designed. Get in touch with our thermal experts to discuss your specific requirements.

Fiber Type Single Mode, Multi Mode, Polarization Maintaining (PM/PZ); Number of Fibers ≤128 (V-Grooves), ≤4096 (2D Arrays); Fiber Cladding Outer Ø 125 µm (V-Grooves), 125 to 220 µm (2D Arrays); Connector Options SMA, FC, ST, SC, LC, MTP, etc.Fiberguide produces extremely tight tolerance one-dimensional (V-Grooves) and two-dimensional arrays using the supplier’s patented manufacturing techniques. These arrays range from a few fibers to thousands of fibers depending on the application. Optical Arrays are used in optical switching and in sensing applications where spatial optical data is necessary, such as DNA sequencing, astronomy and nuclear research. For high temperature applications, some fiber types can be aluminium or gold coated on request. Additionally, all fiber types can be equipped on demand with Fiberguide’s patented RARe Motheye anti-reflective technology that enhances fiber transmission performance and significantly increases the damage threshold for your application over a large wavelength range. Key Features: Fiber Type: Single Mode, Multi Mode Array End: Precision Machined Housings, Silica V-Grooves or Custom Silicon Wafers Connector Options: SMA, FC, ST, SC, LC, MTP, etc. Packaging: Design and Production of Custom Array Housings and Sheathing Arrangements Available to Protect the Fiber Depending on the Application Standard Temperature Range: -40 to + 100 °C Applications: Fiber Optic Switch; Signal Processing; Astronomical Analysis; Military Mapping; DNA Micro-array Technology; Optical Tomography

Adhesive;Fiber Fixing;Epoxy;300g

Heat Exchanger - 6000 Series - Copper Tubes, Copper Fin, Beaded Tube, with fan plate for 1 fan

Compact Sealed Vapor Compression Circuits; Cooling Capacity 450, 1200 W @+25°C; Power Supply 24 VDC, 6-30 A; Temperature Range -10-+45°C, +15-+45°C; Pressure Drop 40-300 mbar @9-4 lpm AMS Technologies’ mLC-KITs are liquid cooling development platforms featuring sealed vapor compression circuits with speed-controlled miniature rotary BLDC compressors. Brazed plate heat exchangers serve as evaporators and provide the interface to the customer liquid coolant circuit. Our mLC-KITs are available with two cooling capacity levels: the ultra-compact mLC-C-450-24-KIT is designed for cooling tasks up to 450 W, while the larger mLC-C-1200-24-KIT provides up to 1200 W cooling capacity. Both mLC-KITs come with inverter boards that require a 24 VDC power supply. The compressors’ speed can be set from the upper control system by frequency or analog signal. The condenser is an aluminum finned copper tube heat exchanger coil. The mLC-KITs must be cooled by forced convection, i. e. 120 × 120 mm fan. The mLC-C-1200-24-KIT 1200 is already equipped with a fan. The heat exchanger stainless steel plates are nickel brazed and suitable for a variety of coolant fluids, such as water, DI water and glycol-water mixtures. The plate heat exchanger has male R ¼"/ R " connectors to connect the water circuit on the customer’s side. Your customized mLC-KIT: For customer requirements that cannot be covered by the mLC-C-450-24-KIT or the mLC-C-1200-24-KIT, our thermal management specialists at AMS Technologies are happy to develop a completely tailor-made liquid cooling solution and offer all services from development and proof-of concept all the way to series production. Get in touch with us now to discuss your customized mLC-KIT. Key Features: Kits to Interface With OEM Water Circuit and Electronics Control Up to 1200 W Cooling Capacity Cooling Capacity mLC-C-450-24-KIT (Approx.): 450 W (@100 rps, Twater = +25°C, Tambient = +25°C) Cooling Capacity mLC-C-1200-24-KIT (Approx.): 930 W (@59 rps, Twater = +20°C, Tambient = +40°C, 2 lpm) to 1760 W (@90 rps, Twater = +20°C, Tambient = +20°C, 4 lpm) Speed Control for Ease of Temperature Control Lightweight, Compact Easy to Integrate Low-vibration, Low-noise Rotary Compressor Components Carefully Designed to Match Each Other Power Supply: 24 VDC, <6A (mLC-C-450-24-KIT, 80 rps), <30 A (mLC-C-1200-24-KIT) Temperature Range (Ambient): -10°C to +45°C (mLC-C-450-24-KIT); +15°C to +45°C (mLC-C-1200-24-KIT) Hydraulic Parameters mLC-C-450-24-IT: Pressure Drop 300 mbar @4 lpm Hydraulic Parameters mLC-C-1200-24-IT: Pressure Drop 40 mbar @6 lpm, 100 mbar @9 lpm Dimensions: 200 x 172 x 180 mm (mLC-C-450-24-KIT), 250 x 386 x 248 mm (mLC-C-1200-24-KIT) Weight: 3.4 kg (mLC-C-450-24-KIT), 10 kg (mLC-C-1200-24-KIT) Applications: Evaluation Kits for Building Water Cooling Solutions With OEM Water Circuit and Electronics Control; Compact Laser Cooling up to 450 or 1200 W; Bio Reagents Cooling; Mobile Applications (mLC-C-450-24-KIT)