BB-100-11-1300/1550-9/125-S-60-3A3A-3-1 Fiber Attenuators

Digital Variable;Multi Mode;1300 nm;FC/PC

The Kingfisher International OPT701 mandrel wrap mode filters are used to improve loss testing accuracy on multimode optical fiber.They comply with standard TIA/EIA-568-C, when used with 2 - 3 mm test ords and 50 or 62.5 μm core fiber.Features Simply improve multimode power and loss testing Comply with TIA/EIA-568-C standards Unique hinged clip eases attachment and removal of test cord Includes mandrels for both 50 and 62.5 μm core fiber Grooved body to ensure correct number of fiber loops are made on the mandrel

Pigtail style inline variable;Single Mode;1300/1550 nm;Rectangular Housing;FC/APC;FC/APC

520 to 660 nm; Optical Power 0.5 to 30 mW; CW to 2 kHz; Connector Type Super/Angled NTT-FC/PC, SC, ST, Universal OZ Optics’ FODL series of visible fiber optic fault locators launches 635 nm visible laser diode light into the fiber. When light encounters a break or sharp bend, it scatters, and the scattered light can be observed emerging from the cable. Fault locators can locate breaks in short patchcords, which an OTDR cannot detect due to its operating dead zone. A fault locator is also much less expensive than an OTDR. However, they are not recommended for use with dark-colored or armored cables. Another use for fault locators is to check connector quality – inside the connector ferrule, poor gluing or dirt may create a micro bend in the fiber producing excess insertion or return losses and maybe resulting in premature failure of the connector. Launching visible light through the fiber, so that it emerges from the connector in question, the distortion appears as a series of rings superimposed on a normal output. Fault locators are available in bench-top, pocket and pen format. Pocket size fault locators can be operated in either CW or pulse modulation mode. Pen size fault locators are CW only. High power versions, available as bench-top units, are also CW only. Key Features: Pen, Pocket and Bench-top Versions Available High Visibility (up to 6 km with a 1 mW, 635 nm Source) Higher Output up to 30 mW, Non-contact Style Power Versions Available Continuous Light or Pulse Modulation Power Supply Alkaline Batteries or AC/DC Adapter Carrying Pouch with Belt Clip for Pocket-size Version 1.25 mm and 2.5 mm ID Universal Connector Receptacles Available Applications: Single Mode and Multi Mode Fiber Testing; Fiber Identifier Applications; Locating Breaks and Bends in Fibers and Connectors; Identifying Fibers and Tracing Optical Signals by Using Modulated Signals; Optimizing Splices

Electrically Controlled Variable;Single Mode;1300/1550 nm;For Inline; FC/APC; FC/APC

Beamsplitters are optical components splitting an incident light beam into two parts. Beam splitters take on many forms: cubes, plates, hexagons, pentagons, polarizing, non-polarizing (usually somewhere in between), narrowband, broadband, dielectric, air-spaced, metal, cemented, optically contacted (epoxy-free bonding), a.s.o. If you are looking for a customized beamsplitter that exactly meets your specific performance and cost requirements, please get in touch with the AMS Technologies beamsplitter experts. Our supplier LightMachinery is extremely experienced with specifying, designing and manufacturing custom beamsplitters using the company’s patented fluid jet polishing (FJP) technology that allows the adjustment of the beamsplitter’s shape and flatness to within a few nanometers. We are looking forward to discussing your customized beamsplitter solution! Together with our supplier LightMachinery, it is our job at AMS Technologies to help you sort out the specifications of your customized beamsplitter. Some of the key parameters to think about are wavelength range, polarization and physical size requirements. For instance, P polarization is much more inclined to transmit at large angles (in the 45° range). The challenge for coating designers is to adjust the transmission of the two polarizations to meet the specific requirements of your custom beamsplitter. Also, if the beamsplitter will be used inside an interferometer, you may need to consider path length and phase matching requirements. It is always good if you can explain how you will be using your beamsplitter, it can really help us to define out your requirements. Due to multiple requests for a very accurate beamsplitter, AMS Technologies is offering two standard LightMachinery precision cube beam splitters with angles good down to 1 arcmin and surfaces flat to λ/10. While the OP-5119 beamsplitter is suitable for the 400 to 900 nm wavelength range in the visible (VIS) spectrum, the OP-5120 beamsplitter is optimized for infrared (IR) wavelengths from 800 to 1750 nm. However, do not hesitate to contact AMS Technologies to discuss and specify your custom beamsplitter in detail!