AvaLight-DH-S-BAL Deuterium-Halogen Light Source

Accessories for Mightex collimated LED light sources comprise dedicated focusing modules and interchangeable collimating lenses, lightguide, microscope and fiber-optic adapters, microscope illumination tubes, connector tubes, a thread converter, empty filter/optics holders, a lightguide holder for converting Type-B LCS into Type-B GCS as well as accessories for beam combiners like a push-pull adjustable mount, a 11 mm LCS adapter or connecting plates. Six different ACC-LCS-F-xx focusing modules for collimated LED light sources are available, comprising modules for 11 to 48 mm clear-aperture collimated LED light sources with working distances from 5 to 100 mm. For details, please refer to the downloadable “Accessories for Collimated LED Light Sources Overview” and the downloadable installation drawings. Eight ACC-LCS-C-xx(-B) additional interchangeable collimating lenses for collimated LED light sources are used to produce different beam sizes with the same LED light source base: Four models with clear apertures of 11, 22, 38 and 48 mm as well as four variants for Type-B light sources. For details, please refer to the downloadable “Accessories for Collimated LED Light Sources Overview”. Four different LCS-LGA22-xxx lightguide adapters can be used to couple light from a 22-mm-diameter collimated LED light source into a lightguide. Variants for lightguides with ferrule diameters of 5, 6.35 (1/4”), 7 and 11.1 mm as well as a ferrule length of 15 mm or greater are available. For details, please refer to the downloadable “Accessories for Collimated LED Light Sources Overview” and the downloadable installation drawings. Eight different ACC-BC25-xxx microscope adapters allow to connect LCS collimated LED light sources and beam combiners to microscopes. Single LCS light sources as well as LCS-BC25 beam combiners or WLS sources can be connected to microscopes like Leica DMI, Olympus (IX & BX, other), Zeiss Axioskop, Nikon Eclipse, Eclipse E200 and LV-UEPI/2/A. For details, please refer to the downloadable “Accessories for Collimated LED Light Sources Overview”. A LCS-FPC-ADP-SMA fiber-optic adapter can be used to couple light from a LCS-Series collimated LED light source (22-mm aperture) into a fiber patchcord and accepts SMA connectorized fiber patchcords. Three different ACC-BC25-MIT-xxx microscope illumination tubes allow to couple a beam combiner or LCS-Series collimated LED light source into the infinity optical path of microscopes. The lengths of these microsope illumination tubes are designed for one beam-combiner distance (up to two LCS sources) or two beam-combiner distances (up to four LCS sources). For details, please refer to the downloadable installation drawing. Three different ACC-LCS-xxx connector tubes for LCS-Series collimated LED light sources are available, comprising a male-to-male C-mount connector with inner threads, a female-to-female C-mount connector with outer threads and a 15 mm extension tube for 22 mm clear-aperture LCS-Series light sources. For details, please refer to the downloadable “Accessories for Collimated LED Light Sources Overview” An ACC-LCS-27C adapter is available for converting M27 thread to C-thread. Two different empty filter/optics holders for 22 mm clear-aperture collimated LED light sources are available (ACC-LCS-H-22, ACC-LCS-EH). Both are excitation filter holders for 25.4 mm (1”) diameter filters with up to 5 mm thickness, with ACC-LCS-EH featuring a threaded output end to connect to Mightex LCS-LGA22-xxx lightguide adapters or ACC-BC25-xxx microscope adapters. For details, please refer to the downloadable “Accessories for Collimated LED Light Sources Overview” and the downloadable installation drawing. Mightex’s GCS-LGH-B-0515 lightguide holder is used to replace the collimating lens on a Type-B LCS in order to convert it to a Type-B GCS. This holder is suitable for lightguides with a ferrule diameter of 5 mm (typical 3-mm-core lightguides) and a ferrule length of 15 mm or greater. Mightex’s ACC-LCS-BC25-PPM push-pull mount for multi-wavelength beam combiners is user-adjustable. Currently, Mightex’s multi-wavelength beam combiners can only be used to directly combine 22-mm-diameter collimated LED light sources. For 11-mm-diameter collimated LED light sources, an ACC-BC25-011 mechanical adapter can be used to attach the LED sources to the beam combiners, before the 11-mm-diameter collimated LED sources can be combined. Three different ACC-BC25-CP-01/02/03 connecting plates are available to connect two or more multi-wavelength beam combiners together, with four screws included. For details, please refer to the downloadable “Accessories for Collimated LED Light Sources Overview” and the downloadable product overview.

Accessories for Mightex LED light sources comprise lightguide collimators, dedicated focusing modules for collimated LED light sources, various cables, fiber-optic adapters, microscope illumination tubes, connector tubes for LCS-Series light sources, a thread converter, empty filter/optics holders, a lightguide holder for converting Type-B LCS into Type-B GCS as well as accessories for beam combiners like a push-pull adjustable mount, a 11 mm LCS adapter or connecting plates. Four different lightguide collimators are used to either couple light from free space into a lightguide or collimate light from a lightguide to form a collimated (parallel) optical beam. Lightguide collimators are key components with numerous applications. For example, a lightguide collimator can project light from a lightguide into a uniform spot in free space. High-numerical-aperture aspherical lenses are used for precise collimation and maximum light throughput. The collimators feature adjustable focus from ~100 mm to infinity. Various lightguide ferrule diameters are supported. Customization is available for other ferrule diameters. For further details, please refer to the downloadable datasheet and the downloadable “Accessories for LED Light Sources Overview”. Six different ACC-LCS-F-xx focusing modules for collimated LED light sources are available, comprising modules for 11 to 48 mm clear-aperture collimated LED light sources with working distances from 5 to 100 mm. For details, please refer to the downloadable “Accessories for LED Light Sources Overview” and the downloadable installation drawings. Four different cables are available for FCS-, FFC-, GCS-, WFC- and WLS-Series LED light sources. Some cables feature push-pull connectors and/or are suitable for 4-channel light sources. For details, please refer to the downloadable “Accessories for LED Light Sources Overview”. A LCS-FPC-ADP-SMA fiber-optic adapter can be used to couple light from a LCS-Series collimated LED light source (22-mm aperture) into a fiber patchcord and accepts SMA connectorized fiber patchcords. Three different ACC-BC25-MIT-xxx microscope illumination tubes allow to couple a beam combiner or LCS-Series collimated LED light source into the infinity optical path of microscopes. The lengths of these microsope illumination tubes are designed for one beam-combiner distance (up to two LCS sources) or two beam-combiner distances (up to four LCS sources). For details, please refer to the downloadable installation drawing. Three different ACC-LCS-xxx connector tubes for LCS-Series collimated LED light sources are available, comprising a male-to-male C-mount connector with inner threads, a female-to-female C-mount connector with outer threads and a 15 mm extension tube for 22 mm clear-aperture LCS-Series light sources. For details, please refer to the downloadable “Accessories for LED Light Sources Overview”. An ACC-LCS-27C adapter is available for converting M27 thread to C-thread. Two different empty filter/optics holders for 22 mm clear-aperture collimated LED light sources are available (ACC-LCS-H-22, ACC-LCS-EH). Both are excitation filter holders for 25.4 mm (1”) diameter filters with up to 5 mm thickness, with ACC-LCS-EH featuring a threaded output end to connect to Mightex LCS-LGA22-xxx lightguide adapters or ACC-BC25-xxx microscope adapters. For details, please refer to the downloadable “Accessories for LED Light Sources Overview” and the downloadable installation drawing. Mightex’s GCS-LGH-B-0515 lightguide holder is used to replace the collimating lens on a Type-B LCS in order to convert it to a Type-B GCS. This holder is suitable for lightguides with a ferrule diameter of 5 mm (typical 3-mm-core lightguides) and a ferrule length of 15 mm or greater. Mightex’s ACC-LCS-BC25-PPM push-pull mount for multi-wavelength beam combiners is user-adjustable. Currently, Mightex’s multi-wavelength beam combiners can only be used to directly combine 22-mm-diameter collimated LED light sources. For 11-mm-diameter collimated LED light sources, an ACC-BC25-011 mechanical adapter can be used to attach the LED sources to the beam combiners, before the 11-mm-diameter collimated LED sources can be combined. Three different ACC-BC25-CP-01/02/03 connecting plates are available to connect two or more multi-wavelength beam combiners together, with four screws included. For details, please refer to the downloadable “Accessories for LED Light Sources Overview” and the downloadable product overview.

Accessories for Mightex’s GCS-Series of lightguide-coupled LED light sources comprise an electrical cable (product number ACC-GCS-C05), a heatsink for 3 mm core liquid lightguides (product number ACC-LLG-HS-03), a range of liquid lightguides and lightguide adapters as well as lightguide collimators. Nine different LLG liquid lightguides are available in three wavelength ranges (300 to 650 nm, 340 to 800 nm and 420 to 2000 nm), with 3 or 5 mm core for 5 or 7 mm ferrule diameters respectively, a numerical aperture (NA) of 0.59 and lengths of 1 or 2 m. For details, please refer to the downloadable “Accessories for Lightguide-coupled LED Light Sources Overview” and the downloadable installation drawing. Four different lightguide adapters for Type-A GCS-Series lightguide-coupled LED light sources are available. Each Type-A GCS device comes with a standard lightguide adapter for 5 mm diameter ferrule (A0510). Other adapters (as well as additional standard adapters) can be purchased separately, for lightguides with ferrule diameters of 5, 6, 7 or 8 mm and ferrule lengths of 10 mm or greater. For details, please refer to the downloadable “Accessories for Lightguide-coupled LED Light Sources Overview”. Four different lightguide adapters for Type-B GCS-Series lightguide-coupled LED light sources are available, for lightguides with ferrule diameters of 5, 7, 8 or 10 mm and ferrule lengths of 15 mm or greater. For details, please refer to the downloadable “Accessories for Lightguide-coupled LED Light Sources Overview”. Four different lightguide collimators are used to either couple light from free space into a lightguide or collimate light from a lightguide to form a collimated (parallel) optical beam. Lightguide collimators are key components with numerous applications. For example, a lightguide collimator can project light from a lightguide into a uniform spot in free space.High-numerical-aperture aspherical lenses are used for precise collimation and maximum light throughput. The collimators feature adjustable focus from ~100 mm to infinity. Various lightguide ferrule diameters are supported. Customization is available for other ferrule diameters. For further details, please refer to the downloadable datasheet and the downloadable “Accessories for Lightguide-coupled LED Light Sources Overview”.

HgAr, Ne, Ar, Zn, Cd Versions; 202.5-1704 nm; Optical Power 1.6 µW; Connector SMA-905; Power Supply 12 VDC, 260 mA, 85-240 VAC, 1.0 A The AvaLight-CAL-xxx is a spectral calibration lamp, available in Mercury-Argon (253.6 to 922.5 nm), Neon (337 to 1084.5 nm), Argon (696.5 to 1704 nm) Zinc (202.5 to 636.2 nm) and Cadmium (214.4 to 643.8 nm) versions. The major lines including their relative intensity and structures are shown in the downloadable datasheet. The standard SMA-905 connector supplies an easy connection between the lamp and optical fibers, making the AvaLight-CAL-xxx a low-cost wavelength calibration system for any fiber-optic spectrometer. AvaSoft-Full spectroscopy software includes an automatic recalibration procedure. The AvaLight-CAL-Mini, AvaLight-CAL-AR-Mini, AvaLight-CAL-Neon-Mini all come in the Mini-housing and are equipped with a connector at the rear enabling to switch the unit on/off remotely with a TTL signal. AvaLight-CAL light sources can also be delivered in rack-mountable version, to be integrated in Avantes 19” Rack-mount or the 9.5” desktop housing. Key Features: Calibration Light Source Available in a Variety of Wavelength Ranges (UV to NIR): 253.6 to 922.5 nm (HgAr), 337 to 966 nm (Ne), 950 to 1704 nm (Ar), 202.5 to 636.2 nm (Zn), 214.4 to 634.8 nm (Cd) Optical Power (in 600 µm Fiber): 1.6 µW Connector: SMA-905 Warm-up Time: 1, <10 min Lamp Lifetime: 1000, 5000 h Power Supply: 12 VDC, 260 mA, 85 to 240 VAC, 1.0 A Dimensions: 150 x 78 x 37, 175 x 110 x 44 mm Applications: Wavelength Calibration of Fiber Optic Spectrometers

175-2500 nm; Drift <±0.1, <±0.5%/h; Optical Power 11-354 µW; Halogen Lamp Colour Temperature 3,000 K; Power Supply 100-240 VAC, 50/60 Hz In need of more power than the AvaLight-DHc? The AvaLight-DH-S is Avantes’ most powerful deuterium-halogen source. Like the DHc, the DH-S is also a combined deuterium and halogen light source, capable of transmitting light in the UV/VIS/NIR-range, but has 35 times more halogen output and up to 300 times more deuterium power. The source has a prominent 656 nm deuterium peak which can limit dynamic range (see Avalight-DH-S-BAL as an alternative). It includes a focusing lens assembly, to fully utilize the possibilities and size of your fiber. The AvaLight-D-S is a deuterium light source only, making it a great option for measurements in the UV range, 190 to 400 nm. The AvaLight-D-S-DUV version starts even lower at 175 nm, for your deep-UV experiments. This version also offers twice the intensity at 200 nm. The output of the AvaLight-D(H)-S light source is optimized for fibers or bundles up to 600 µm. For larger fibers, the focal point is manually adjustable to optimize the light coupling into your fiber. The AvaLight-D(H)-S also features an integrated TTL-shutter and filter holder for filters of up to 50 x 50 x 5.0 mm. Key Features: Combined Deuterium-Halogen Light Source UV-VIS-NIR Range Deep-UV Option High Optical Power Integrated TTL-Shutter Wavelength Range: 175 to 2500 nm Warm-up Time: 20, 30 min Lamp Power: 5, 78 W Maximum Drift: ±0.1, ±0.5%/h Noise (AU): 2x10-5, 10-4 Colour Temperature (Halogen Lamp): 3,000 K Optical Power: 11, 43 µW (200 µm Fiber), 72, 239 µW (600 µm Fiber), 206, 354 µW (1000 µm Fiber) Lamp Lifetime: 1000, 2000 h Power Supply: 100 to 240 VAC, 50/60 Hz Dimensions: 315 x 165 x 140 mm Applications: Spectroscopy and Measurements in the Deep-UV/UV/VIS/NIR Range

200-1099 nm; Calibration Repeatability ±1.0%; Calibration Relative Uncertainty ±9%-±10%; Bulb Output 5, 80 µW cm-2 nm-1; Power Supply 100-240 VAC Calibrating your spectrometer has never been easier: Avantes’ AvaLight-DH-CAL series are NIST-traceable, calibrated light sources to measure absolute spectral intensity with. For calibrations in the ultraviolet (UV) and visible (VIS) range (200 to 1099 nm), the AvaLight-DH-CAL is the best solution. This source can be used with all AvaSpec spectrometers to calibrate for absolute spectral intensity. It is supplied with a built-in diffuser, a cosine corrector (CC-VIS/NIR) with SMA adapter and a CD-ROM containing the calibration files in ASCII format. Two calibration files are included: one for irradiance calibration over the full range (200 to 1099 nm) and one over the visible and near infrared range (350 to 1099 nm). For the first file, both the deuterium and the halogen bulb should be used during calibration. The second file is to be used with only the halogen light. The halogen-only spectrum provides a smoother black-body calibration spectrum for the longer wavelengths. The calibration files can be imported in the AvaSoft-IRRAD application software for intensity calibration, which turns your spectrometer into a spectroradiometer. For a more balanced spectrum across the 200 to 1100 nm range, Avantes offers the AvaLight-DH-BAL-CAL light source. For ultraviolet range calibration only (200 to 400 nm), the AvaLight-D-CAL is the right choice. The AvaLight-DH-CAL-ISPxx is a special version of these calibrated light sources, meant to facilitate coupling of the AvaSphere-xx-IRRAD integrating spheres (xx is 30, 50 or 80) to the light source. The AvaLight-DH-CAL, AvaLight-DH-BAL-CAL and AvaLight-D-BAL-CAL all include a power supply. Key Features: Flexible Calibration Ultraviolet (UV) and Visible (VIS) Range Built-in Diffuser and Cosine Corrector Calibration Use: Irradiance µW cm-2 nm-1 Calibrated Surface: CC-UV/VIS or AvaSphere Wavelength Range: 200 to 1099 nm Calibration Repeatability: ±1.0% Calibration Relative Uncertainty to NIST Standard: ±10% (200 to 240 nm), ±9% (240 to 350 nm), ±10% (350 to 400 nm), ±9.5% (400 to 1100 nm) Calibration Valid for 60 h Warm-up Time: ca. 30 min Bulb Output: 80 µW cm-2 nm-1 (@215 nm), 5 µW cm-2 nm-1 (@800 nm) Power Supply: 100 to 240 VAC Dimensions: 315 x 165 x 140 mm Applications: Calibration of Spectrometers in UV or VIS Wavelength Range; Measuring Absolute Spectral Intensity

Deuterium-Halogen; 200-2500 nm; Stability <1 mAU; Drift <0.25%/h; Optical Power 0.2, 7 µW; Power Supply 12 VDC, 450 mA Get the best of two worlds with Avantes’ AvaLight-DHc full range light source. It has both a deuterium light source and a halogen light source, providing you with adequate light between 200 and 2500 nm for nearly all absorbance chemistry applications. Deuterium emits light between 200 and 550 nm, whereas halogen emits light of up to 2500 nm. Coupling to the rest of your spectroscopy system is easy with the SMA connector. This light source is recommended in settings with large fiber cables or direct-attachment to a cuvette holder such as the CUV-DA, due to its relatively low output energy. The integrated TTL-shutter makes saving a dark measurement very simple in combination with AvaSoft (extra IC-DB26-2 needed). Optionally, the AvaLight-DHc is available in a rack-mountable version, to be used in the 19” rack or the 9.5” desktop system. A direct-attach cuvette holder CUV-DA is available for fluorescence or absorbance measurements. Key Features: Combined Deuterium-Halogen Light Source Integrated TTL-Shutter Wavelength Range: 200 to 2500 nm Stability: <1 mAU Warm-up Time: 1, 8 min Drift: <0.25%/h Optical Power (in 600 µm Fiber): 0.2, 7 µW Lamp Lifetime: 1000, 2000 h Temperature Range: 5 to 35 °C Power Supply: 12 VDC, 450 mA Dimensions: 175 x 110 x 44 mm Applications: Nearly All Absorbance Chemistry Applications

350-2500 nm; Calibration Repeatability ±0.5%; Calibration Relative Uncertainty ±3.5%, ±5.0%; Bulb Output 170 µW cm-2 nm-1; Power Supply 12 VDC, 2.08 A Calibrating your spectrometer has never been easier: Avantes’ AvaLight-HAL-CAL-Mini series are NIST-traceable, calibrated light sources to measure absolute spectral intensity with. AvaLight-HAL-CAL-Mini series are compact, affordable light sources. The devices are calibrated for the visible (VIS) range (350 to 1095 nm). Optionally, an extended calibration for the near-infrared (NIR) spectral range (1100 to 2500 nm) can be ordered. AvaLight-HAL-CAL light sources have a built-in diffuser, a cosine corrector with SMA adapter and come with a calibration file in ASCII format. Calibration can be done using the AvaSoft software. The AvaLight-HAL-CAL-ISPxx-Mini is a special version of the Avalight-HAL-CAL-Mini, which enables coupling any of Avantes’ AvaSphere-xx-IRRAD integrating spheres (xx = 30, 50 or 80) to the light source for calibration. This source is supplied with a special bottom plate to stabilize the AvaSphere. Avalight-HAL-CAL-Mini and Avalight-HAL-CAL-ISPxx-Mini calibrated light sources include a power supply. Key Features: Field Calibration Visible (VIS) and optional Near-Infrared (NIR) Range Built-in Diffuser Versatile Calibration Use: Irradiance µW cm-2 nm-1 Calibrated Surface: CC-VIS/NIR or AvaSphere Wavelength Range: 350 to 1095 nm; 1100 to 2500 nm Calibration Repeatability: ±0.5% Calibration Relative Uncertainty to NIST Standard: ±5.0% (350 to 1100 nm), ±3.5% (1100 to 1950 nm), ±5.0% (1950 to 2500 nm) Calibration Valid for 60 h Warm-up Time: ca. 15 min Bulb Output: 170 µW cm-2 nm-1 (@800 nm) Power Supply: 12 VDC, 2.08 A Dimensions: 150 x 78 x 37 mm Applications: Calibration of Spectrometers in VIS or NIR Wavelength Range; Measuring Absolute Spectral Intensity

Halogen; 360-2500 nm; Stability <0.1%/°C; Colour Temperature 2,700-3,000 K; Optical Power 0.5-14 mW; Power Supply 12 VDC, 2.08 A From visible light to near infrared, that’s where Avantes’ AvaLight-HAL-S-Mini halogen light source works best. It’s a compact, stabilized halogen light source with adjustable focusing of the fiber connection, maximizing output power at the desired wavelength. The light source also has adjustable output power to provide extra power or longer bulb life. A filter-slot mounted on the front of the AvaLight-HAL-Mini accepts 1” round or 2” x 2” square filters, to block specific ranges of wavelengths or instantly lower the intensity. The adjustable focus on the AvaLight-HAL-Mini helps you getting the most out of your light source: it makes sure all possible power is transmitted through your optical fiber. Bulb replacement is easy and can be done in a matter of minutes. The lamp’s optical output can be controlled through a dongle at the rear or from your computer. At low setting, the lamp has a colour temperature of 2,700 K but provides over 13,000 hours of lifetime. The standard or medium setting changes the colour temperature to 2,850 K and provides 50% more power with a bulb lifetime of 4,000 hours. The high-power setting gives a colour temperature of 3,000 K, doubles power compared to the long-life setting and gives you up to 1,000 hours of lifetime. The AvaLight-HAL-S-Mini features an internal TTL-shutter, controllable from your AvaSpec spectrometer. This gives you the ability to use the auto-save dark option in AvaSoft spectroscopy software. Optionally a combined direct-attach cuvette holder and attenuator is available(CUV-ATT-DA-HAL). for attenuation one can use the Inline Filter Holder (FH-INL) or the Inline attenuator (ATT-INL). Key Features: Wavelength Range: 360 to 2500 nm Stability: <0.1%/°C Time to Stabilize (Warm-up Time): <10 min Bulb Life: 1,000 to 13,000 h, Depending on Setting Optical Power: 0.5 to 0.7 mW (200 µm Fiber), 3.2 to 6 mW (600 µm Fiber), 7 to 14 mW (1000 µm Fiber), Depending on Setting Bulb Colour Temperature: 2,700 to 3,000 K, Depending on Setting Temperature Range: 0 to 55 °C Power Supply: 12 VDC, 2.08 A Dimensions: 150 x 78 x 37 mm Applications: Spectroscopy With Visible Light (VIS) to Near Infrared (NIR)

High Power; 385-625 nm; FWHM 15-35 nm; Optical Power 3.4 mW; Connector SMA-905; Power Supply 5 VDC, 500 mA Avantes’ Avalight-HPLED series are compact light sources meant for fluorescence applications. This high-power version was made for more demanding applications compared to Avantes’ regular AvaLight-LED light sources. AvaLight-HPLED light sources produce continuous or pulsed spectral output at different wavelengths. All sources have an SMA-905 connector to connect fiber optics and come with a 5 VDC/1.6 A power supply. These high-power LED light sources can be used as a DC source or pulsed with a programmable pulse width modulation (PWM), supplied by an AvaSpec-USB2 or EVO spectrometer (IC-DB26-2 cable needed). Key Features: Compact High Power Levels Fluorescence Excitation Several Excitation Wavelengths Wavelength Range: 385 to 625 nm FWHM: 15, 25, 35 nm Optical Power (in 600 µm Fiber): 3.4 mW Connector: SMA-905 Power Supply: 5 VDC, 500 mA Dimensions: 150 x 78 x 37 mm Applications: Fluorescence Applications; Fluorescence Excitation

355-780 nm; FWHM 11-30 nm; Optical Power 10, 25 µW; Connector SMA-905; Power Supply 12 VDC, 40 mA Avantes’ Avalight-LED is a compact light source meant for fluorescence applications. It produces continuous or pulsed spectral output at different wavelengths. Some standard excitation wavelengths are shown in the downloadable datasheet, but other wavelengths are available upon request. The sources have an SMA-905 connector to couple to fiber optics. The AvaLight-LED can be used as a DC source or pulsed with a programmable pulse width modulation (PWM), supplied by an AvaSpec-USB2 spectrometer (IC-DB26-2 cable needed). The CUV-DA is a cuvette cell holder that has an integrated LED for direct illumination of the cell. This provides greater excitation energy for fluorophores with low quantum efficiency. Other accessories include the CUV-FL and CUV-ALL cuvette holders and the FCR-UV fluorescence probes. Key Features: Low-cost Fluorescence Excitation Compact Flexible Excitation Wavelength Wavelength Range: 355 to 780 nm FWHM: 11, 15, 30 nm Optical Power (in 600 µm Fiber): 10, 25 µW Connector: SMA-905 Power Supply: 12 VDC, 40 mA Dimensions: 175 x 110 x 44 mm Applications: Fluorescence Applications; Fluorescence Excitation

200-1000 nm; Total Average Optical Power 66 mW; Optical Power per Pulse 0.66-7.4 µJ; Pulse Duration 5 µs; Pulse Delay 6 µs; Max. Pulse Rate 100 Hz; Power Supply 12 VDC, 550 mA Avantes’ AvaLight-XE is a pulsed xenon light source, perfect for ultraviolet applications like fluorescence. When connected to your AvaSpec spectrometer through the IC-DB26-2 cable (sold separately), the flashes are synchronized with the data collected by the spectrometer. The number of flashes per scan can be selected in AvaSoft. With a special deep-ultraviolet (DUV) bulb, the AvaLight-XE can be used for deep-ultraviolet applications (below 200 nm). A special direct-attach cuvette holder is available for your fluorescence applications. For transmission measurements, the Avalight-XE can be used in conjunction with the CUV-ATT-DA which has an iris attenuator to limit the light output and to avoid saturation. Key Features: Pulsed Xenon Light Source Perfect for Fluorescence Cuvette Holder Available Long Lifetime Wavelength Range: 200 to 1000 nm Total Optical Power: 39 µJ per Pulse, 66 mW Average Optical Power per Pulse: 0.66 µJ (200 µm Fiber), 3.2 µJ (600 µm Fiber), 7.4 µJ (1000 µm Fiber) Average Optical Power: 20 µJ (200 µm Fiber), 320 µJ (600 µm Fiber), 744 µJ (1000 µm Fiber) Pulse Duration: 5 µs (@ 1/3 Height) Pulse Delay: 6 µs Maximum Pulse Rate: 100 Hz Bulb Lifetime: min 109 Pulses Power Supply: 12 VDC, 550 mA Dimensions: 175 x 110 x 44 mm Applications: Spectroscopy in the Ultraviolet (UV) and Deep-Ultraviolet (DUV) Ranges; Flourescence; Transmission Measurements