AD20BP8N SC/PC Adapter

Universal Adapters; Connector Type (Super, Ultra) NTT-FC/PC, SMA 905/906, AT&T-ST, (Angled) SC, Universal; Fiber Type Single Mode (Hybrid Patchcord, Lens Style), Multi Mode (Lens Style) OZ Optics’ AA series of universal connectors and hybrid patchcords are designed for mating two patchcords that have different connectors on their ends. Butt joint style universal connectors feature different female receptacles on either side. Patchcords are simply plugged into either side, and the fiber ends butt together in the middle. These connectors offer an inexpensive and reliable way to connect matching single mode, multi mode, or polarization maintaining patchcords with differing fiber terminations. Connectors with a universal ferrule adaptor design are also available, for connectors that have 2.5 mm diameter ferrules, or 1.25 mm diameter ferrules. These receptacles are best suited for temporary measurements and give added flexibility. Hybrid patchcords have a female receptacle on one side and a male connector on the other side. A small length of fiber lies within the device to transmit the light. Male-to-male hybrid patchcords are also available. Lens style universal connectors are ideal for connecting fibers that have different optical characteristics. They consist of an input receptacle, a collimating lens, a focusing lens and the output receptacle. Light from the input fiber is first collimated, then focused back into the output fiber. The alignment is precisely controlled using OZ Optics’ patented alignment technique. Lens style universal connectors are tilt adjustable to compensate for any offsets between the fiber cores and the connector housings. Please note that universal connectors will not couple light efficiently from a multi mode fiber into a single mode fiber. High losses are unavoidable in this situation, since multi mode fibers have both larger numerical apertures and larger core sizes. Key Features: Mates Patchcords With Different Connector Types Connectors With Different Ferrule Sizes Supported Minimizes Losses Between Fibers With Different Core Sizes And Numerical Apertures Male To Female (Hybrid) Connector Versions Rugged And Compact Design Low Insertion and Return Losses Applications: Patch Panel Interconnects; Fiber Distribution Hubs; Test And Measurement Stations; Optical Delivery Systems

ST/PC; DD-Shape; Phosphor Sleeve; Simplex; MM

ST/PC; DD-Shape; Zirconia Sleeve; Simplex; SM/PM

SC/APC; Zirconia Sleeve; Simplex; SM/PM; Green

SC/PC; Zirconia Sleeve; Simplex; SM/PM; Blue

FC/APC Type R (Narrow Key); Square Shape; Zirconia Sleeve; Simplex; SM/PM

FC/PC Type N (Wide Key); Square Shape; Zirconia Sleeve; Simplex; SM/PM

FC/APC Type R (Narrow Key); D-Shape; Zirconia Sleeve; Simplex; SM/PM

FC/PC Type N (Wide Key); D-Shape; Zirconia Sleeve; Simplex; SM/PM

LC/APC; Zirconia Sleeve; Simplex; SM/PM; Green Further adapters are available. Please check here the whole offer.

LC/PC; Zirconia Sleeve; Simplex; SM/PM; Blue

Bare Fiber Adapters; Magnetic and Spring Clamp Versions; Connector Type FC, SMA905, ST, SC, LC, E2000; Ferrule Hole Size 80 to 250 µm; Reusable and Easy to Clean OZ Optics’ BARE series of bare fiber adapters provide a simple and effective way to use unterminated fibers with commercial receptacles. Simply strip, clean and cleave your fiber and insert into the bare fiber adapter. The BARE series adapters are recommended for power meter connections, temporary system repairs or wherever a quick fiber connection is required. OZ Optics has recently improved the bare fiber adapter design to now use a magnetic clamping mechanism. The new design gently yet firmly holds the fiber in place without harming soft acrylate coatings and is even easier for operators to use. The magnetic clamp applies no stress to the fiber, which makes it ideal for PM fiber related measurements including extinction ratio (ER), polarization dependent loss (PDL) and polarization mode dispersion (PMD). Bare fiber adapters with spring clamp accommodate up to 900 µm OD jacketed fiber. Bare fiber adapters with magnetic clamp accommodate 250 to 400 µm OD jacketed fiber. 900 µm OD tight buffer and custom jacket sizes are available. (Please contact AMS Technologies). Key Features: Easy to Use Reusable and Easy to Clean Magnetic Clamp Applies no Stress to Fiber Variety of Connector Types & Fiber Sizes Applications: Briefly Connect to Light Sources, Power Meters, OTDRs, Extinction Ratio Meters, a.s.o.; Test Unterminated Fiber and Fiber Spools; Installation and Repair Work