6 Series RF Reed Relays
Product number:
SW10198
Manufacturer:
Cynergy 3 Components-Sensata Technologies
Product information "6 Series RF Reed Relays"
Miniature Fully Screened 4 A; 3.5 kV
The 6 series is a fully screened relay offering low RF loss and high current carrying capacity, which was developed with RF design engineers in the radio communications industry.
Manufacturer "Cynergy 3 Components-Sensata Technologies"
Related links of the manufacturer
Similar products
4 Series RF Reed Relays
Miniature Screened 3.5 A; 3.5 kV
The 4 series is a highly flexible, low cost package for RF applications in the 1-30MHz band. The use of vacuum reed switches with Rhodium contacts offers high isolation voltages, low contact resistance and long operating lifetime. Additional RF screening is available to further enhance RF performance for more demanding applications. Available as Form A (SPNO), Form B (SPNC) or latching (bistable) contact configurations with switch connections via either PCB or flying lead.
Product number:
SW10197
Manufacturer:
D Series Flying Lead Connection HV Reed Relays
10 & 15 kV isolation; 50 W; Flying Lead Connection
The very high isolation voltages of the D series, up to 15kV, are achieved through the use of high vacuum reed switches with either Rhodium or Tungsten contacts and make these relays suitable for high reliability applications such as cardiac defibrillators, test equipment and high voltage power supplies. The Rhodium contacts have low contact resistance while the Tungsten contacts can switch higher voltages.
Product number:
SW10204
Manufacturer:
D Series Panel Mount HV Reed Relays
10 & 15 kV isolation; 50 W; Panel Mount
The very high isolation voltages of the D series, up to 15kV, are achieved through the use of high vacuum reed switches with either Rhodium or Tungsten contacts and make these relays suitable for high reliability applications such as cardiac defibrillators, test equipment and high voltage power supplies.
Product number:
SW10207
Manufacturer:
D Series PCB Connection HV Reed Relays
10 & 15 kV isolation; 50 W; PCB Connection
The very high isolation voltages of the D series, up to 15kV, are achieved through the use of high vacuum reed switches with either Rhodium or Tungsten contacts and make these relays suitable for high reliability applications such as cardiac defibrillators, test equipment and high voltage power supplies.
Product number:
SW10205
Manufacturer:
D Series Spade Connection HV Reed Relays
10 kV isolation; 50 W; Spade Connection
The very high isolation voltages of the D series, up to 10kV, are achieved through the use of high vacuum reed switches with either Rhodium or Tungsten contacts and make these relays suitable for high reliability applications such as cardiac defibrillators, test equipment and high voltage power supplies.
Product number:
SW10208
Manufacturer:
D Series Turret Connection HV Reed Relays
10 & 15 kV isolation; 50 W; Turret Connection
The very high isolation voltages of the D series, up to 15kV, are achieved through the use of high vacuum reed switches with either Rhodium or Tungsten contacts and make these relays suitable for high reliability applications such as cardiac defibrillators, test equipment and high voltage power supplies.
Product number:
SW10206
Manufacturer:
D-HR Series HV Reed Relays
High Insulation Resistance, High Voltage Relays - 5 kV; 7.5 kV; 10 kV & 15 kV
Very high isolation voltages - up to 15kV - are achieved through the use of high vacuum reed switches with either Rhodium or Tungsten contacts and make these relays suitable for high reliability applications such as cardiac defibrillators, test equipment and high voltage power supplies. The Rhodium contacts have low contact resistance while the Tungsten contacts can switch higher voltages.
Product number:
SW10210
Manufacturer:
Customers also viewed
FRD30000 Series RF Reed Relays
Fully Screened 20A relay
Very high current capacity and high voltage isolation of the FRD30000 series is achieved through the use of high vacuum reed switch contacts, ensuring a high level of performance and reliability. The two standard models will carry currents of 12 and 20 Amps respectively at 30MHz and feature silver plated, fully screened coil assemblies for ultra low RF losses. Typical applications include over the horizon (OTH) HF radar systems and 1kW base station transmitters.
Product number:
SW10202
Manufacturer:
mDC-CT-4-KIT mini Compressor/Thermoelectric Plate-to-Air Cooling Kit
Compressor Refrigerant Circuit and TEC Cascaded; Cooling Capacity 4W @-50°C; Ultra Wide Temperature Range -50-+150°C
Key Features:
Cascading of Compressor Refrigerant Circuit and Peltier Element
Refrigerant Directly Cooling the Peltier Element’s Hot Side
Ultra Wide Temperature Range -50°C to +150°C in a Compact System
Very precise temperature control
Stable Operation @-50°C With 4 W Cooling Capacity
No Need for Coolant (Water) Loop
No Corrosion/Erosion
Low Vibration, Low Noise
AMS Technologies’ mDC-CT-4-KIT direct cooling system cascades a thermoelectric (Peltier) element and a compressor-based refrigerant circuit. Based on the "direct evaporation" technology, the compressed refrigerant evaporates directly on the hot side of the thermoelectric (Peltier) module and thus dissipates the heat very effectively and with high heat flux.
The Compressor/ Peltier cascade significantly expands the temperature range of the capabilities of the individual technologies, enabling a very wide operating temperature range from -50°C to +150°C in a compact device. Utilizing suitable insulation, constant operation at -50°C is possible, while still providing about 4 W cooling power at this extreme temperature point.
The mDC-CT-4-KIT mini compressor/thermoelectric plate-to-air cooling kit does not require a water circuit, is very quiet, low-vibration and maintenance-free. Possible applications are in the fields of analytics, molecular reactors, rheology, or viscosity measurement – or wherever very low temperatures have to be maintained with moderate heat loads.
Direct evaporation technology is also very suitable for cooling and temperature stabilization of laser diodes or laser diode stacks at temperatures of around +25°C – an application area covered by AMS Technologies’ mDC-T-130-24-KIT thermoelectric plate-to-air cooling kit.
For customer requirements that cannot be covered by our mDC-T-130-24-KIT or mDC-CT-4-KIT, AMS Technologies’ thermal management specialists are happy to develop a direct cooling solution tailored to your needs – based on Peltier or compressor technology, or both – and offer all services from development and proof-of concept to series production. Get in touch with us now to discuss your customized direct cooler.
Specifications:
Set Temperature Range: -50°C to +150°C
Cooling Capacity at Tambient 25°C and Tplate 25°C: 40 W
Cooling Capacity at Tambient 25°C and Tplate -50°C: 4 W
Applications: Analytics; Molecular Reactors; Rheology; Viscosity Measurement; Wherever Very Low Temperatures Have to be Maintained With Moderate Heat Loads
Product number:
SW11965
Manufacturer: