3P/4P-GPS-X General Purpose Integrating Spheres & Kits

Input Voltage 102-264 VAC; Max. Output Voltage 1-60 kVDC; Max. Power 300 W; Efficiency >85%; Voltage Regulation <0.005% + 0.5 mV/mA; Current Regulation <0.1% XP Glassman’s MQ Series of 300 W high voltage AC/DC power supplies feature flexible embedded controls with low ripple and noise. They are air insulated, fast response, chassis-mount units with tight regulation and extremely low arc discharge currents. A broad range of models is available with output voltage ranges from 0 to 1 kVDC through 0 to 60 kVDC. The MQ Series is a family of sophisticated, medium-power, high voltage AC/DC power supplies that complies with current international safety and EMI directives. XP Glassman has packaged this series as a space-saving module to avoid the expense of front panels and displays. However, no compromises in performance and/or operating features have been made. The result is a power supply series that offers outstanding value for a wide range of demanding applications. The MQ series features “air” as the primary dielectric medium. No oil or encapsulation is used which would impede serviceability or increase weight. Internal circuitry constantly senses and integrates arcs that occur over a given time. In the event a system or load arcing problem develops and exceeds factory-set parameters, the power supply will cycle off in an attempt to clear the fault and then automatically restart after a preset “off dwell time”. The MQ Series’ high voltage output is inhibited for a short period after each load arc to help extinguish the arc. Ripple is less than 0.025% of rated voltage at full load. Continuous, stable adjustment from 0 to rated voltage or current by panel-mounted 10-turn potentiometer with 0.05% resolution or by external 0 to 10 V signals is provided. Integral RS-232, USB and optional Ethernet communications provide remote control program and monitor. Automatic current regulation provides protection against all overloads, including arcs and short circuits. A connection made on the interface connector allows selection of either constant-current or current-trip operation. Standard accessories for the MQ Series include a detachable 2,4 m shielded high voltage coaxial output cable, line cord, null modem cable and USB cable. The MQ Series supplies with 230 VAC input option (198 to 264 VAC RMS, 48 to 63 Hz) are fully compliant with the following European directives: EN61000-3-2, Line Harmonics EN61010/ IEC61010, Safety EN61000-6-4, Conducted and Radiated Emissions EN61000-6-2:2005, Conducted and Radiated Immunity 2011/65/EU, Restriction of the Use of Hazardous Substances (RoHS) Key Features: Maximum Output Power: 300 W Maximum Output Voltage: 1 to 60 kVDC Compact Module Air Insulated Low Ripple: <0.025% of Rated Voltage + 0.5 V RMS at Full Load Tight Regulation Constant Voltage/Constant Current Operation Arc Quench & Arc Count RS232, USB & Optional Ethernet Control Static Voltage Regulation: <0.005% + 0.5 mV/mA for Specified Line and Load Variations Dynamic Voltage Regulation: <2% of Rated Voltage Automatic Current Regulation Protects Against All Overloads, Including Arcs and Short Circuits Current Regulation: <0.1% From Short Circuit to Rated Voltage at Any Load Condition Maximum Output Current: 5 to 300 mA Input Voltage: 102 to 132, 198 to 264 VAC RMS, 48 to 63 Hz, Single Phase Efficiency: >85% Typical at Full Load Output Voltage Accuracy: 0.2% of Rated + 0.5% of Setting Output Voltage Repeatability: <0.1% of Rated Voltage Stored Energy: 0.35 to 3.5 J Voltage Monitor: 0 to +10 VDC Signal for 0 to Rated Voltage Current Monitor: 0 to +10 VDC Signal for 0 to Rated Current Stability: 0.01%/h After 0.5 h Warm-up, 0.05% per 8 h Polarity: Positive or Negative Polarity With Respect to Chassis Ground Signals Provided on the Remote Interface Connector: Safety Interlock, Voltage & Current Program/Monitor, HV Enable, HV Status, Fault Status, +10 V Reference, I/V Mode Status, Local Control Options: 100, 230 VAC Input, Slow Start Ramp, Zero Start Interlock, 0 to 5 V Voltage & Current Program/Monitor, Arc Count and/or Quench, Power Factor Correction (PFC), Virtual RS-232 COM Port Over Ethernet Network 3 Year Warranty Approvals: IEC61010-1:2010; EN61000-6-4:2007, Class A EN61000-6-2:2005 Operating Temperature: -20 to +40 °C Dimensions: 120.7 x 203.2 x 520.7 mm Applications: High Voltage, High Power Applications; Photonics; Healthcare (Analytical, Diagnostics, Detectors); Industrial; Semiconductor Manufacturing; Research; Other

980-1620 nm; SOP Change Rate ≤11 Mrad/s; IL <0.6 dB; PDL <0.1 dB; PMD <0.2 ps; AL <0.1 dB; RL >50 dBLunas MPC-203 high-speed multifunction polarization controller is specially designed to meet the high SOP (state of polarization) scrambling requirements needed for stress testing a coherent receiver’s polarization tracking performance.MPC-203 combines Lunas award winning PolaRite™ II/III polarization controller with proprietary polarization control algorithms to achieve a wide range of polarization control functionalities, including high-speed polarization scrambling with a maximum SOP change rate of up to 11 Mrad/s.Unlike other high-speed polarization scramblers found in the market, this all-fiber, pass-through design ensures low insertion loss (IL), polarization dependent loss (PDL), polarization mode dispersion (PMD) and activation loss (AL).Key Features:High-speed SOP (state of polarization) ScramblingSOP Change Rate up to 11 Mrad/sScrambling With Rayleigh Rate DistributionDiscrete SOP ScramblingSOP ModulationOperating Wavelength Range: 1260 to 1620 nm, 980 to 1310 nmTornado Polarization Scrambling: 0 to 11 Mrad/sMean Rayleigh Rate Distribution Polarization Scrambling: 0.00 to 2,000 rad/sTriangle Polarization Scrambling: 0.00 to 2,000 x 2π rad/sDiscrete Random States Polarization Scrambling: 0.00 to 20,000 points/sManual Polarization Control: 4 Channels, 0 to 4π Each ChannelLow Insertion Loss (IL): <0.6 dB With ConnectorsLow Polarization Dependent Loss (PDL): <0.1 dB With ConnectorsLow Polarization Mode Dispersion (PMD): <0.2 ps With ConnectorsLow Activation Loss (AL): <0.1 dB With ConnectorsReturn Loss: >50 dB With ConnectorsOptical Power Handling: 1,000 mWBright OLED DisplayApplications: SOP Response Test of Coherent Receivers; SOP Tracking Speed Test; PMD and PDL Related Tests; SOP Variation Emulation; Polarization Scrambling

Measurement Range: 350-900 nm Standard, 250-900 nm with upgrade; NIST-traceable calibration; Stray Light <0.1% @600, 435 nm; Integration Time 0.5ms - 10 secondsThe ILT560 is a miniature, portable spectrometer series for budget-conscious customers. The ILT560 Spectroradiometer comes standard with a SMA905 receptor allowing it to be used a variety of fiber patch cords including both flexible and rigid models. All systems include ILT's comprehensive software package, SpectriLight II, to allow calculations such as CCT.Key features:Range: 350 nm to 900 nm Standard (250-900 nm requires RAA4 and dual source calibration upgrade)NIST-Traceable Calibration IncludedSpectral Range 350-900 nm standard, 250-900 nm with upgradeStray Light: <0.1% @600, 435 nmAD Converter: 16 bit, 2 MHzSignal/Noise: 600:1Integration Time: 0.5 ms – 10 secondsInterface: USB 2.0Power Suppl:y USB PowerDimensions: 91 x 60 x 34.5 mmTemperature Range: 5 – 35 °CCCD: 2048Resolution: 1 nmSlit: 25 micronApplications: Plant Growth/PAR/Plant Photobiology, Characterization of UV Curing Systems, Photostability Testing, Reflectance, Absorbance/Transmittance, LED Illumination and Color Analysis, Radiometery and Photometry Measurements, AcceleratedPlease note that International Light products are available from us only in Denmark, Finland, Iceland, Italy, Norway, and Sweden.